Instruction/ maintenance manual of the product EHX*E Series Pelco
Go to page of 12
C417M-M (2/06) INSTALLATION/OPERATION EHX*E Series Explosionproof Camera Enclosure.
.
C417M-M (2/06) 3 Important Safety Instructions 1. Installation and servicing should be done only by qualified service personnel and conform to all local codes.
4 C417M-M (2/06) Description The EHX*E Series of nonpressurized, explosionproof camera enclosures is designed to meet the rigorous requirements of explosionproof and dust-ignitionproof electrical equipment for installation and use in hazardous locations.
C417M-M (2/06) 5 Installation The following parts are supplied: 1 Enclosure with attached mounting cradle 1 3/16-inch Allen wrench 1 5 mm Allen wrench 2 1/4-20 x 1/2-inch screws 2 Appleton explosionpr.
6 C417M-M (2/06) 13. If required, attach a ground wire to the terminal lug on the rear plate. NOTE: The internal grounding terminal must be used for the equipment grounding connection and the external terminal is for a supplementary bonding connection where local codes or authorities permit or require such connection.
C417M-M (2/06) 7 Operation If your enclosure has a heater , the heater turns on at 40°F (4°C) and turns off at 60°F (16°C). If your enclosure has a blower , the fan operates continuously . MAINTENANCE REGULAR MAINTENANCE Regularly scheduled maintenance will help to prolong the operational life and appearance of the equipment.
8 C417M-M (2/06) Specifications Cable Entry 2 explosionproof sealable fittings Window Ground and polished, fully tempered plate glass Window Viewing Area EHX4E 3.19 in. (8.10 cm) diameter EHX6E 3.00 in. (7.62 cm) diameter EHX6E-16 3.00 in. (7.62 cm) diameter EHX8E 4.
C417M-M (2/06) 9 Certifications and Ratings Classified by Underwriters Laboratories Inc. as to explosion and fire hazard only T ype 4X enclosure for use in hazardous locations Class I, Groups C and.
.
PRODUCT WARRANTY AND RETURN INFORMA TION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years on FT/FR8000 Series fiber optic products.
United States | Canada | United Kingdom | The Netherlands | Singapore | Spain | Scandinavia | France | Middle East W orldwide Headquarters 3500 Pelco W ay Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www .
An important point after buying a device Pelco EHX*E Series (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco EHX*E Series yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco EHX*E Series - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco EHX*E Series you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco EHX*E Series will certainly help you make a decision on the purchase.
If you already are a holder of Pelco EHX*E Series, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco EHX*E Series.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco EHX*E Series. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco EHX*E Series along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
