Instruction/ maintenance manual of the product ea2010 Pelco
Go to page of 4
® EA2010 Post Equalizing V ideo Amplifier Installation/Operation Manual C630M Rev A (8/90) 1.0 W ARNINGS Prior to installation and use of this product, the follow- ing W ARNINGS should be observed. 1. Installation and servicing should only be done by Qualified Service Personnel and conform to all Local codes.
2 Pelco Manual C630M Rev A (8/90) 3.1 OPTIONS DT200 Dual desktop mount kit; two units can be mounted side-by-side in one desktop chassis. R300 Rack mounting kit. Up to three (3) units may be racked horizontally In a single rack kit. Blank filler panels provided for use when less than three units are racked.
Pelco Manual C630M Rev A (8/90) 3 5.0 SPECIFICA TIONS MECHANICAL Recessed Screwdriver Adjustments: Gain, HF Boost, LF Boost ELECTRICAL Input Voltage: 120 VAC, 50/60 Hz (230 VAC, 50 Hz optional) Power Requirements for Transformer: 1.
4 Pelco Manual C630M Rev A (8/90) 6.0 WARRANTY AND RETURN INFORMA TION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one (1) year after the date of shipment.
An important point after buying a device Pelco ea2010 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco ea2010 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco ea2010 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco ea2010 you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco ea2010 will certainly help you make a decision on the purchase.
If you already are a holder of Pelco ea2010, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco ea2010.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco ea2010. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco ea2010 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
