Instruction/ maintenance manual of the product DX9000RM Pelco
Go to page of 20
DX9000RM-KIT C644M (1/04) ® INST ALLA TION.
2 C644M (1/04) CONTENTS Section Page DESCRIPTION ..........................................................................................................................................................................................................
C644M (1/04) 3 DESCRIPTION The DX9000RM-KIT allows you to upgrade DX9000 recorders and viewstations with the same RAID Manager software that is found in DX9200 recorders and DX9100 viewstations.
4 C644M (1/04) INST ALLA TION Make sure the following parts are included with your kit. 1V iewstation Disk #1 1V iewstation Disk #2 1V iewstation Disk #3 1 Recorder Disk 1 Floppy Ghost Disk NOTE: Y ou must write down your system’ s name and IP address, and export all videos before starting these procedures.
C644M (1/04) 5 3. Select Advanced BIOS Features, and then press Enter . The following screen appears. Figure 2. Advanced BIOS Features 4. Select CDROM as the First Boot Device, and then press Enter . 5. Select Floppy as the Second Boot Device, and then press Enter .
6 C644M (1/04) GHOST PROCEDURE This procedure allows you to configure your master viewstation. 1. Close all applications on the viewstation. 2. Insert Viewstation Disk #1 (CD-DX9000RM-VS1) into the CD-ROM drive of the viewstation. 3. Go to Start > Shutdown > Restart.
C644M (1/04) 7 3. Use pcAnywhere™ remote control software to select the recorder you wish to install the RAID Manager software on. Figure 5 shows a recorder named PELCO124. Figure 5. DX9000 Recorder 4. Click OK. The login window appears. Figure 6. Login Window 5.
8 C644M (1/04) Figure 8. Viewstation Name 9. Click OK. The login window appears. 6. Click OK. The following window appears. Figure 7. Recorder Applications 7. Close all applications on the recorder , such as the DX9000 Recording Server application and DX9000 Server Attendant application.
C644M (1/04) 9 10. Enter your username and password. The default username is admin and the default password is 1234 . The following window appears. Figure 9.
10 C644M (1/04) 11. Open the Additional Installs folder on the viewstation. The following window appears. Figure 10. Raid Manager Folder.
C644M (1/04) 11 12. Copy the RAID Manager software on the viewstation to the Additional Installs folder on the recorder . Figure 11. Raid Manager Software Copy Procedure 13. Close the network connection to the viewstation and install the Raid Manager .
12 C644M (1/04) RAID MANAGER INST ALLA TION Before you install this utility on the recorder , you must install it on the administrator viewstation. 1. Open the Additional Installs folder on the recorder . The following window appears. Figure 13. Welcome Dialog Box Figure 12.
C644M (1/04) 13 3. Click Next. The following dialog box appears. Figure 14. Software License Agreement Dialog Box 4. Click Y es. The following dialog box appears.
14 C644M (1/04) 5. Click Next. The following dialog box appears. Figure 17. Raid Manager Server Component Figure 16. Select Components Dialog Box 6. Select Raid Manager Server , and then click Next.
C644M (1/04) 15 7. Click Next. The following dialog box appears. Figure 18. Select Program Folder Dialog Box 8. Click Next and then Finish..
16 C644M (1/04) CONFIGURE THE RAID MANAGER SERVER 1. Go to Start > Programs > Raid Manager Utility > Raid Manager Server > Raid Manager Server . The following dialog box appears. Figure 19. Detect Option Dialog Box 2. V erify that the process found “1 SCSI/Fiber RAID Controller .
C644M (1/04) 17 6. Right-click the Raid Manager Server icon. The following menu appears. Figure 21. Run at Windows Startup Menu Option 7. Select “Run at Windows Startup.” 8. Right-click the icon again to verify that “Run at Windows Startup” changed to “Remove from Windows Startup.
18 C644M (1/04).
C644M (1/04) 19 REVISION HISTORY Manual # Date Comments C644M 1/04 Original version. ® Pelco and the Pelco logo are registered trademarks of Pelco. ® Windows is a registered trademark of Microsoft Corporation. © Copyright 2004, Pelco. ™ pcAnywhere is a trademark of Symantec.
World Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada Tel: 800/289-9100 Fax: 800/289-9150 International Tel: 1-559/292-1981 Fax: 1-559/348-1120 www.
An important point after buying a device Pelco DX9000RM (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco DX9000RM yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco DX9000RM - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco DX9000RM you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco DX9000RM will certainly help you make a decision on the purchase.
If you already are a holder of Pelco DX9000RM, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco DX9000RM.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco DX9000RM. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco DX9000RM along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
