Instruction/ maintenance manual of the product DX4500 Pelco
Go to page of 20
Digital Video Recorder DX8100 C2676M (9/07) DX4500/DX4600 Series Hard Disk Drive Installation Instructions.
2 C2676M (9/07).
C2676M (9/07) 3 Contents Important Safety Instructi ons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4 C2676M (9/07) List of Illustrations 1 Installation Order of HDDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2 New Hard Disk Drive Found Dialog Box. . . . . . . . . . . . . . . .
C2676M (9/07) 5 Important Safety Instructions Be sure to read familiarize manual and all safety instructions and before proceeding with the HDD installation. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions.
6 C2676M (9/07) Introduction Welcome to the hard disk drive (HDD) installation ins tructions for the DX4500/DX4600 Series digital video recorder (DVR). Before you install the hard drive, fami liarize yourself with all the instructions in this manual. The DX4508/DX4516 supports two HDDs and a storage capacity up to 1500 GB.
C2676M (9/07) 7 Figure 2. New Hard Disk Drive Found Di alog Box PARTS LIST AND T OOLS T o install the HDD, you will also need a nonm agnetic Phillips screwd ri ver #1 and an optional small container to store screws (not supplied).
8 C2676M (9/07) Installing a Hard Disk Drive 1. Properly shut down the DX450 0/DX4600 Series DVR. Ref er to the installation manual or operation/ programming manual supplied with the unit. 2. Unplug the power cord from the wall socket. Figure 3. Removing Power Cord from W all 3.
C2676M (9/07) 9 OPENING THE CHASSIS If the DX4500/DX4600 is mounted in a rack, it must be removed from the rack prior to HDD installation. One person can lift and remove the DVR. Make sure the unit is turned off and you are wearing a properly grounded ESD wrist strap before attempting to open the chassis cover .
10 C2676M (9/07) 3. Using a Phillips screwdriver , remove the chassis cover , a nd do the following: a. Remove the top two screws on the left and righ t side panels of the DVR. b. Remove the four silver screws (on the top of the u nit) fastening the cover to the back of the unit.
C2676M (9/07) 11 SLOT ASSIGNMENTS AND COMPONENT LAYOUT Refer to Figure 7 for informat ion about the DX450 0/DX4600’ s layout of major components. Figure 7.
12 C2676M (9/07) REMOVING THE MOUNTING BASKET If a HDD is already installed, go to step 1. If a HDD is not yet installed, go to step 2. 1. T o remove the SA T A HDD po wer connector and d ata cable do the following: a. Grasp the top and bottom of the SA TA power connector and carefully and simultaneously pull straight back on the connector .
C2676M (9/07) 13 REMOVING THE HDD NOTE: It is recommended that you do not remove previous ly installed drives. If you do remove a drive for any reason, be sure to note the arrangement of the driv es within the drive basket and reinstall them in the same order they appeared prior to removal.
14 C2676M (9/07) REINSTALLING THE MOUNTING BASKET 1. T o reinstall the HDD mounting basket: a. Gently lower the basket into place. Be careful not to force the basket free or to disturb other components inside the unit. b. Using a Phillips screwdriver , fasten the four screws that attach the drive basket to the chassis.
C2676M (9/07) 15 Reassembling the Unit 1. Replace the chassis cover using the screws you re moved from the sides and rear of the unit (refer to Figure 14). Figure 14. Replacing the Chassis Cover 2. Attach the silver product label that came with your upgrade kit to the inside of your DVR’ s front door .
16 C2676M (9/07) Formatting The DX4500/DX4600 automatically detects when a new dr ive is installed or when a current drive is switched to a different SA TA connector . After the DX4500/DX4600 starts, the system prompts you to format the newly installed drive.
C2676M (9/07) 17 3. Do one of the following: • T o format the newly installed HDDs, click OK. The “Hard disk drive recovery in progress” dialog box appears. • T o cancel the formatting process, click Cancel. The unit exits to the application window.
18 C2676M (9/07) . The materials used in the manufacture of this document and its components are compliant to t he requirements of Directive 2002/95/EC.
PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merc handise proved defective in ma terial or wor kmanship for a period of one year after the date of shipment.
Worl dwide Headquarters 3500 Pelco W ay Clovis, California 93612 USA USA & Canada T el: 800/289-9 100 Fax: 800/289-9150 International T el: 1-559/292-19 81 Fax: 1-559/348-1120 www .
An important point after buying a device Pelco DX4500 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco DX4500 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco DX4500 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco DX4500 you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco DX4500 will certainly help you make a decision on the purchase.
If you already are a holder of Pelco DX4500, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco DX4500.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco DX4500. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco DX4500 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
