Instruction/ maintenance manual of the product CM9700-SER-32 Pelco
Go to page of 16
CM9700-SER-32 Port Expander INSTALLATION/OPERATION C579M-A (5/05).
.
C579M-A (5/05) 3 Contents Regulatory Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Installation .
4 C579M-A (5/05) Regulatory Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
C579M-A (5/05) 5 Installation The CM9700-SER-32 port expander assembly increases by 32 the number of available Sercom (serial communication) ports in a node-based CM9700-CC1 via the installation of an RP (rocket port) PCI expansion card.
6 C579M-A (5/05) e. Reinstall the top cover and secure with mounting screws. Figure 2. Removing the CC1 T op Cover Figure 3. CC1 Internal Layout 3. Mount external hardware. Refer to Figure 1 and do the following: a. Mount the port expansion unit so that the two supplied data cables will reach the CC1 unit.
C579M-A (5/05) 7 e. Connect peripherals to desired expansion ports. Refer to RP1 in Figure 4. Figure 4. Rocket Card to Expansion Port Control Association 4. Apply power to the CC1. After applying power , press the Delete key on the keyboard to enter into the BIOS menu settings, and then do the following: a.
8 C579M-A (5/05) 4 SERCOM CARDS, 2 ROCKET PORT CARDS, COM 2 UNAVAILABLE (96 T OTAL PORTS) 1. T urn off all power to the CC1. Disconnect and label all attached cabling. 2. Install the RP cards into the CC1. Refer to Figure 2 and Figure 3 and do the following: a.
C579M-A (5/05) 9 8. Scroll down to PERIPHERAL SETTINGS, press Enter , and then do the following: a. Scroll down to ONBOARD SERIAL PORT 2. b. Change the setting to DISABLED by pressing Page Down. c. Press Esc. d. Scroll down to SA VE SETTINGS AND EXIT and type Y e.
10 C579M-A (5/05) Figure 5. Sercom Card Mounting Plate Removal NOTE: If the VGA card is present in PCI slot 2, remove the retaining screw and gently pull the card up. Reinstall the card into PCI slot 4 (follow steps d, e, and f, applying them to the VGA card and PCI slot 4).
C579M-A (5/05) 11 Figure 7. CM9700-ADP-120 Adapter Plate Installation 6. Reinstall the top cover and secure with mounting screws. 7. Mount external hardware.
12 C579M-A (5/05) 3 SERCOM CARDS, 3 ROCKET PORT CARDS, COM 2 UNAVAILABLE (120 T OTAL PORTS) 1. T urn off all power to the CC1. Disconnect and label all attached cabling.
C579M-A (5/05) 13 7. Mount external hardware. Refer to Figure 1 and do the following: NOTE: This procedure is for each individual port expansion assembly (one RP card and port expansion unit) and is to be duplicated for each RP card installed in the CM9700-CC1.
14 C579M-A (5/05).
PRODUCT WARRANTY AND RETURN INFORMA TION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years on FT/FR8000 Series fiber optic products.
W orldwide Headquarters 3500 Pelco W ay Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www .
An important point after buying a device Pelco CM9700-SER-32 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco CM9700-SER-32 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco CM9700-SER-32 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco CM9700-SER-32 you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco CM9700-SER-32 will certainly help you make a decision on the purchase.
If you already are a holder of Pelco CM9700-SER-32, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco CM9700-SER-32.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco CM9700-SER-32. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco CM9700-SER-32 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
