Instruction/ maintenance manual of the product CCC1380H-6X Pelco
Go to page of 16
CCC1380H-6, CCC1380H-6X, and MCC1380H-6 C1963M (8/04) ® INST ALLA TION/OPERA TION 1/3-Inch CCD Camera.
2 C1963M (8/04) CONTENTS Section Page IMPORT ANT SAFETY INSTRUCTIONS ............................................................................................... 3 REGULA TORY NOTICES ................................................................
C1963M (8/04) 3 This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.
4 C1963M (8/04) REGULA TORY NOTICES This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
C1963M (8/04) 5 DESCRIPTION The CCC1380H-6, CCC1380H-6X, and MCC1380H-6 digital cameras are high resolution, compact video cameras that feature a 1/3-inch CCD imager . Each camera’ s high resolution and high-density image sensor ensure a sharp and clear picture over a wide range of conditions.
6 C1963M (8/04) LOCA TION AND FUNCTION OF P ARTS Lens Mount The camera has a standard CS lens mount but can use a C-mount lens when a C/CS-mount adapter is installed between the lens and camera. Back Focus Lock Screw Loosen the locking screw to adjust the back focus.
C1963M (8/04) 7 Eclipser Level Controls The eclipser function is set at the factory and usually does not need to be readjusted. However , if adjustment is necessary , refer to the section on Eclipser Adjustment in this manual. THRE Sets the level for the brightest part of the picture.
8 C1963M (8/04) A WB – Automatic White Balance Following are the AWB switch settings: OFF – Processes the viewed image to retain color balance in a restricted color temperature range. ON (Default setting) – Automatically processes the viewed image to retain color balance over a wide color temperature range.
C1963M (8/04) 9 CONNECTIONS POWER To connect to the power supply: 1. Strip at least .50 inch (13 mm) from the power cord to expose the wires. 2. Insert the three wires into the holes in the terminal strip until they snap into place. 3. Confirm that the cord is connected to terminal securely by lightly tugging on the cord.
10 C1963M (8/04) LENS INST ALLA TION The CCC1380H-6, CCC1380H-6X, and MCC1380H-6 can use fixed, manual, or passive (DC- controlled) auto iris lenses. The camera has a standard CS lens mount but can use a C-mount lens when a C/CS-mount adapter is installed between lens and camera.
C1963M (8/04) 11 BACK FOCUS ADJUSTMENT Do not release the back focus locking ring unnecessarily . Back focus adjustment has been set at the factory to the standard CS-mount back focus distance. However , once a lens is mounted it may be necessary to adjust back focal length to match the lens being used.
12 C1963M (8/04) CAMERA SYNCHRONIZA TION The power supply of each camera is set to the same synchronized phase at the factory and usually does not need to be readjusted. When using more than one camera power supply , a brief vertical roll may occur on the monitor each time a camera view is switched.
C1963M (8/04) 13 ECLIPSER ADJUSTMENT The eclipser function is set at the factory and usually does not need to be readjusted. However , if fine tuning is necessary , do the following: 1. Set the DIP switches. a. AGC: OFF b. ESC: OFF c. BLC: OFF 2. Set the variable resistors and Eclipse DIP switch.
14 C1963M (8/04) SPECIFICA TIONS GENERAL Imaging Device 1/3-inch interline transfer CCD Picture Elements CCC1380H-6, MCC1380H-6 768H x 494V (approx. 380K) CCC1380H-6X 752H x 582V (approx.
C1963M (8/04) 15 PRODUCT W ARRANTY AND RETURN INFORMA TION W ARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment.
Worldwide Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada Tel: 800/289-9100 Fax: 800/289-9150 International Tel: 1-559/292-1981 Fax: 1-559/348-1120 www.
An important point after buying a device Pelco CCC1380H-6X (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco CCC1380H-6X yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco CCC1380H-6X - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco CCC1380H-6X you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco CCC1380H-6X will certainly help you make a decision on the purchase.
If you already are a holder of Pelco CCC1380H-6X, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco CCC1380H-6X.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco CCC1380H-6X. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco CCC1380H-6X along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
