Instruction/ maintenance manual of the product C579M Pelco
Go to page of 41
® Pelco World Headquarters • 3500 Pelco Way, Clovis, California 93612-5699 USA • www.pelco.com USA & Canada: Tel: 800/289-9100 • Fax: 800/289-9150 International: Tel: 1-559/292-1981 • Fax: 1-559/348-1120 ADDENDUM Addendum No.
System 9760 ® Installation Guide C1503M (11/99) Pelco • 300 W. Pontiac Way, Clovis • CA 93612-5699 USA • Pelco Online @ http://www.pelco.com In North America and Canada: Tel (800) 289-9100 or F.
2 Pelco Manual C1503M (1 1/99) CONTENTS Section Page SYSTEM UNP ACKING AND RACKING ............................................................................. 3 SYSTEM DA T A CONNECTIONS ..............................................................
Pelco Manual C1503M (1 1/99) 3 This guide is intended to help you with the basic installation and setup of the Pelco System 9760 ® Matrix Switcher and Controller . This guide is not a replacement for the system manual, but rather a tool to help you quickly get the system up and running.
4 Pelco Manual C1503M (1 1/99) 6. Install the system CM9760-CC1 CPU and CM9760-MXB matrix bays near each other . Note that each CM9760-MXB has a unique label for identifying the bay location in the installation. This ID information is important in ensuring correct video and data connec- tions.
Pelco Manual C1503M (1 1/99) 5 ADDITIONAL HOOKUP INFORMA TION • Comms File The Comms Setup File contains information about the equipment that is attached to your system. Access the Comms dialog box by clicking on the Comms tab in the Setup 9760 Configuration dialog box.
6 Pelco Manual C1503M (1 1/99) MUL TI-BA Y SYSTEMS 1. Down-Framing – For systems with more than 16 monitor outputs, you must pas- sively loop the video from the first CM9760-MXB to the second CM9760-MXB for the next 16 monitors. The best location for the second bay is below the first bay , as shown in the system drawing.
Pelco Manual C1503M (1 1/99) 7 DOS The CM9760 system ’ s program runs in DOS. Therefore, you will need to use basic DOS commands to transfer , overwrite, and edit data, and to maintain files on your hard drive. The default configuration files on the CM9760-CC1 hard drive are defined at the factory and are labeled “ TEST .
8 Pelco Manual C1503M (1 1/99) 2. Insert a 3.5-inch floppy disk into the PC. Select the Write File icon on the task bar . This opens the Flat File Utility – Write dialog box. The default for writing flat files is to generate all files regardless of whether or not they are used.
Pelco Manual C1503M (1 1/99) 9 5. Change the command line in the autoexec.bat file to reflect the new flat files name: from TEST to newfilename (the name you chose in step 2 above). 6. Click File , then Save . 7. Y ou also need to change the test.bat file to reflect the new flat files name, otherwise the system will not run.
10 Pelco Manual C1503M (1 1/99) PRINTER COM1 COM2 5 6 7 8 9 10 11 12 20 19 18 17 16 15 14 13 28 27 26 25 24 23 22 21 36 35 34 33 32 31 30 29 System 9760 Factor y Default Por t Settings Note: The number of por ts on your system may differ from the above drawing.
Pelco Manual C1503M (1 1/99) 11 SETUP DRA WINGS PRINTER COM1 COM2 35 29 28 21 20 13 12 5 LPT PRINTER PORT FA N POWER INPUT POWER SWITCH A T KEYBOARD PORT VGA PORT OPTIONAL RELA Y POR T RS-232 PORT 1 RS-232 PORT 2 PORT 36 PORT 29 PORT 28 PORT 21 PORT 20 PORT 13 PORT 12 PORT 5 RS-422 PORTS Figure 2.
12 Pelco Manual C1503M (1 1/99) PRINTER COM1 COM2 35 29 28 21 20 13 12 5 Alarm Black Out RS-422 RS-422 Alarm Black Out RS-422 RS-422 CAMS 257-496 CAMS 1-256 481 257 241 1 REFER TO PORT ASSIGNMENT P AGE FOR YOUR SYSTEM ’ S SPECIFIC DA TA CONNECTIONS CM9760-CC1 CM9760-MXB CM9760-MXB 16 1 Figure 3.
Pelco Manual C1503M (1 1/99) 13 Figure 4. 496 X 16 Looping Alarm Black Out RS-422 RS-422 Alarm Black Out RS-422 RS-422 Alarm Black Out RS-422 RS-422 Alarm Black Out RS-422 RS-422 CAMS 257-496 CAMS 1-2.
14 Pelco Manual C1503M (1 1/99) Figure 5. 736 X 16 Alarm Black Out RS-422 RS-422 Alarm Black Out RS-422 RS-422 Alarm Black Out RS-422 RS-422 CAMS 513-736 CAMS 257-512 CAMS 1-256 257 REFER TO PORT ASSI.
Pelco Manual C1503M (1 1/99) 15 Figure 7. 976 X 16 Alarm Black Out RS-422 RS-422 Alarm Black Out RS-422 RS-422 Alarm Black Out RS-422 RS-422 CAMS 257-512 Alarm Black Out RS-422 RS-422 CAMS 769-976 CAM.
16 Pelco Manual C1503M (1 1/99) Figure 8. 976 X 16 Looping Alarm Black Out RS-422 RS-422 Alarm Black Out RS-422 RS-422 Alarm Black Out RS-422 RS-422 961 769 753 513 Alarm Black Out RS-422 RS-422 Alarm.
Pelco Manual C1503M (1 1/99) 17 Figure 9. 496 X 32 Alarm Black Out RS-422 RS-422 Alarm Black Out RS-422 RS-422 481 257 241 1 Alarm Black Out RS-422 RS-422 Alarm Black Out RS-422 RS-422 REFER TO PORT A.
18 Pelco Manual C1503M (1 1/99) Figure 10. 496 X 32 Looping Alarm Black Out RS-422 RS-422 Alarm Black Out RS-422 RS-422 481 257 241 1 Alarm Black Out RS-422 RS-422 Alarm Black Out RS-422 RS-422 CAMS 2.
Pelco Manual C1503M (1 1/99) 19 Figure 11. 736 X 32 Alarm Black Out RS-422 RS-422 Alarm Black Out RS-422 RS-422 721 513 497 257 Alarm Black Out RS-422 RS-422 Alarm Black Out RS-422 RS-422 Alarm Black .
20 Pelco Manual C1503M (1 1/99) Figure 12. 736 X 32 Looping Alarm Black Out RS-422 RS-422 Alarm Black Out RS-422 RS-422 721 513 497 257 Alarm Black Out RS-422 RS-422 Alarm Black Out RS-422 RS-422 Alar.
Pelco Manual C1503M (1 1/99) 21 Figure 13. 976 X 32 Alarm Black Out RS-422 RS-422 Alarm Black Out RS-422 RS-422 961 769 753 513 Alarm Black Out RS-422 RS-422 Alarm Black Out RS-422 RS-422 Alarm Black .
22 Pelco Manual C1503M (1 1/99) Figure 14. 976 X 32 Looping Alarm Black Out RS-422 RS-422 Alarm Black Out RS-422 RS-422 961 769 753 513 Alarm Black Out RS-422 RS-422 Alarm Black Out RS-422 RS-422 Alar.
Pelco Manual C1503M (1 1/99) 23 Figure 15. 256 X 48 Alarm Black Out RS-422 RS-422 241 1 Alarm Black Out RS-422 RS-422 Alarm Black Out RS-422 RS-422 REFER TO PORT ASSIGNMENT P AGE FOR YOUR SYSTEM ’ S.
24 Pelco Manual C1503M (1 1/99) Figure 16. 256 X 48 Looping Alarm Black Out RS-422 RS-422 241 1 Alarm Black Out RS-422 RS-422 Alarm Black Out RS-422 RS-422 CAMS 1-256 OUT REFER TO PORT ASSIGNMENT P AG.
Pelco Manual C1503M (1 1/99) 25 Figure 17. 496 X 48 Alarm Black Out RS-422 RS-422 Alarm Black Out RS-422 RS-422 481 257 241 1 Alarm Black Out RS-422 RS-422 Alarm Black Out RS-422 RS-422 Alarm Black Ou.
26 Pelco Manual C1503M (1 1/99) Figure 18. 496 X 48 Looping Alarm Black Out RS-422 RS-422 Alarm Black Out RS-422 RS-422 481 257 241 1 Alarm Black Out RS-422 RS-422 Alarm Black Out RS-422 RS-422 Alarm .
Pelco Manual C1503M (1 1/99) 27 Figure 19. 736 X 48 Alarm Black Out RS-422 RS-422 Alarm Black Out RS-422 RS-422 721 513 497 257 Alarm Black Out RS-422 RS-422 Alarm Black Out RS-422 RS-422 Alarm Black .
28 Pelco Manual C1503M (1 1/99) Figure 20. 736 X 48 Looping Alarm Black Out RS-422 RS-422 Alarm Black Out RS-422 RS-422 721 513 497 257 Alarm Black Out RS-422 RS-422 Alarm Black Out RS-422 RS-422 Alar.
Pelco Manual C1503M (1 1/99) 29 Figure 21. 976 X 48 Alarm Black Out RS-422 RS-422 Alarm Black Out RS-422 RS-422 961 769 753 513 Alarm Black Out RS-422 RS-422 Alarm Black Out RS-422 RS-422 Alarm Black .
30 Pelco Manual C1503M (1 1/99) Figure 22. 976 X 48 Looping Alarm Black Out RS-422 RS-422 Alarm Black Out RS-422 RS-422 961 769 753 513 Alarm Black Out RS-422 RS-422 Alarm Black Out RS-422 RS-422 Alar.
Pelco Manual C1503M (1 1/99) 31 Figure 23. 256 X 64 Alarm Black Out RS-422 RS-422 241 1 Alarm Black Out RS-422 RS-422 Alarm Black Out RS-422 RS-422 Alarm Black Out RS-422 RS-422 REFER TO PORT ASSIGNME.
32 Pelco Manual C1503M (1 1/99) Figure 24. 256 X 64 Looping Alarm Black Out RS-422 RS-422 241 1 Alarm Black Out RS-422 RS-422 Alarm Black Out RS-422 RS-422 Alarm Black Out RS-422 RS-422 CAMS 1-256 OUT.
Pelco Manual C1503M (1 1/99) 33 Figure 25. 496 X 64 Alarm Black Out RS-422 RS-422 Alarm Black Out RS-422 RS-422 481 257 241 1 Alarm Black Out RS-422 RS-422 Alarm Black Out RS-422 RS-422 Alarm Black Ou.
34 Pelco Manual C1503M (1 1/99) Figure 26. 496 X 64 Looping Alarm Black Out RS-422 RS-422 Alarm Black Out RS-422 RS-422 481 257 241 1 Alarm Black Out RS-422 RS-422 Alarm Black Out RS-422 RS-422 Alarm .
Pelco Manual C1503M (1 1/99) 35 Figure 27 . 736 X 64 Alarm Black Out RS-422 RS-422 Alarm Black Out RS-422 RS-422 721 513 497 257 Alarm Black Out RS-422 RS-422 Alarm Black Out RS-422 RS-422 Alarm Black.
36 Pelco Manual C1503M (1 1/99) Figure 28. 736 X 64 Looping Alarm Black Out RS-422 RS-422 Alarm Black Out RS-422 RS-422 721 513 497 257 Alarm Black Out RS-422 RS-422 Alarm Black Out RS-422 RS-422 Alar.
Pelco Manual C1503M (1 1/99) 37 Figure 29. 976 X 64 Alarm Black Out RS-422 RS-422 Alarm Black Out RS-422 RS-422 961 769 753 513 Alarm Black Out RS-422 RS-422 Alarm Black Out RS-422 RS-422 Alarm Black .
38 Pelco Manual C1503M (1 1/99) Figure 30. 976 X 64 Looping Alarm Black Out RS-422 RS-422 Alarm Black Out RS-422 RS-422 961 769 753 513 Alarm Black Out RS-422 RS-422 Alarm Black Out RS-422 RS-422 Alar.
Pelco Manual C1503M (1 1/99) 39 NOTES.
40 Pelco Manual C1503M (1 1/99) ® Pelco, the Pelco logo, and System 9760 are registered trademarks of Pelco. © Copyright 1999, Pelco. All rights reserved. WARRANTY Pelco will repair or replace, without charge, any merchandise proved defec- tive in material or workmanship for a period of one year after the date of shipment.
An important point after buying a device Pelco C579M (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco C579M yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco C579M - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco C579M you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco C579M will certainly help you make a decision on the purchase.
If you already are a holder of Pelco C579M, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco C579M.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco C579M. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco C579M along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
