Instruction/ maintenance manual of the product C531M-A Pelco
Go to page of 2
This upgrade kit is designed for upgrading CM6700 matrix switchers to the latest software revision. By installing this PROM, the CM6700 will operate with 3.02 software. Contact Pelco 24-hour technical support at (800) 289-9100 with any questions or concerns about the procedures described below .
REVISION HISTOR Y Manual # Date Comments C531M 1 1/97 Original version. Upgrade to V er . 2.0 software. C531M-A 8/99 Upgrade to V er . 3.02 software. Figure 1.
An important point after buying a device Pelco C531M-A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco C531M-A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco C531M-A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco C531M-A you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco C531M-A will certainly help you make a decision on the purchase.
If you already are a holder of Pelco C531M-A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco C531M-A.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco C531M-A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco C531M-A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
