Instruction/ maintenance manual of the product C494M-E Pelco
Go to page of 12
HS2000 High Security Enclosure INSTALLATION C494M-E (9/06).
.
C494M-E (9/06) 3 Contents Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Description .
4 C494M-E (9/06) Important Safety Instructions 1. Installation and servicing should be done only by qualified service personnel and conform to all local codes.
C494M-E (9/06) 5 Description The HS2000 high-security camera enclosure is designed for indoor corner mount installation in such settings as elevators, parking garages, classrooms, offices, and detention cells requiring maximum protection from vandalism in an unobtrusive package.
6 C494M-E (9/06) Installation Before installing the HS2000 to a wall, make sure that the mounting surface is able to support four times the full weight of the enclosure, camera, and lens. The tilt table and tilt table mounting brackets may be removed to provide adequate clearance for mounting the enclosure.
C494M-E (9/06) 7 REPLACEMENT TAMPER SWITCH INSTALLATION The HS2000 enclosure comes with a tamper switch installed. If you need to install a replacement switch, refer to Figure 1 for the correct position of the switch and perform the following steps: 1.
8 C494M-E (9/06) Maintenance Maintenance performed at regularly scheduled intervals will help prolong the operational life and appearance of the equipment. Clean the window with a mild nonabrasive detergent in water and a soft cloth regularly to help maintain picture clarity .
C494M-E (9/06) 9 Exploded Assembly Diagram Figure 2. HS2000 Exploded Assembly Diagram T able A. Mechanical Parts List Item No. Qty Description Part Number 1 Bracket, switch, break-in HS10004313COMP 1 Window , 8" x 7" x 0.
10 C494M-E (9/06) Specifications Mechanical Camera Mounting Adjustable tilt table Maximum Camera/Lens Size Accepts camera/lens combinations (including BNC connector) up to 3.0" H x 3.0" W x 6.0" L (7.62 x 7.62 x 15.24 cm) Enclosure Mounting Four 0.
The materials used in the manufacture of this document and its components are compliant to the requirements of Directive 2002/95/EC. This equipment contains electrical or electronic components that mu.
W orldwide Headquarters 3500 Pelco W ay Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www .
An important point after buying a device Pelco C494M-E (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco C494M-E yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco C494M-E - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco C494M-E you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco C494M-E will certainly help you make a decision on the purchase.
If you already are a holder of Pelco C494M-E, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco C494M-E.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco C494M-E. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco C494M-E along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
