Instruction/ maintenance manual of the product C417M-L Pelco
Go to page of 12
EHX*E Series Explosionproof Camera Enclosure C417M-L (7/03) ® INST ALLA TION/OPERA TION.
2 C417M-L (7/03).
C417M-L (7/03) 3 CAUTION: RISK OF ELECTRIC SHOCK. DO NOT OPEN. IMPORT ANT SAFEGUARDS AND W ARNINGS Observe the following W ARNINGS before installing and using this product. 1. Installation and servicing should be done only by qualified service personnel and conform to all local codes.
4 C417M-L (7/03) DESCRIPTION The EHX*E Series of nonpressurized, explosionproof camera enclosures is designed to meet the rigorous requirements of explosionproof and dust-ignitionproof electrical equipment for installation and use in hazardous locations.
C417M-L (7/03) 5 INST ALLA TION The following parts are supplied: 1 Enclosure with attached mounting cradle 1 3/16-inch Allen wrench 15 mm Allen wrench 2 1/4-20 x 1/2-inch screws 2 Appleton explosionp.
6 C417M-L (7/03) 13. If required, attach a ground wire to the terminal lug on the rear plate. IMPORT ANT NOTE: The internal grounding terminal must be used for the equipment grounding connection and the external terminal is for a supplementary bonding connection where local codes or authorities permit or require such connection.
C417M-L (7/03) 7 OPERA TION If your enclosure has a heater , the heater turns on at 40 ° F (4 ° C) and turns off at 60 ° F (16 ° C). If your enclosure has a blower , the fan operates continuously . MAINTENANCE REGULAR MAINTENANCE WARNING: Do not remove the front cover .
8 C417M-L (7/03) SPECIFICA TIONS Cable Entry: 2 explosionproof sealable fittings. Window: Ground and polished, fully tempered plate glass Window Viewing Area: EHX4E 3.19 in. (8.10 cm) diameter EHX6E 3.00 in. (7.62 cm) diameter EHX6E-16 3.00 in. (7.62 cm) diameter EHX8E 4.
C417M-L (7/03) 9 Figure 2. EHX*E Series Dimension Drawing Certifications and Ratings: Classified by Underwriters Laboratories Inc. as to explosion and fire hazard only T ype 4X enclosure for use in ha.
10 C417M-L (7/03).
C417M-L (7/03) 11 REVISION HISTORY Manual # Date Comments C417M-I 7/97 Rev. I. Updated manual to new for mat. Revised installation instructions and added assembly drawings to show all new enclosures, which were redesigned by Engineering to meet additional and more stringent standards for global certification.
World Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada Tel: 800/289-9100 Fax: 800/289-9150 International Tel: 1-559/292-1981 Fax: 1-559/348-1120 www.
An important point after buying a device Pelco C417M-L (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco C417M-L yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco C417M-L - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco C417M-L you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco C417M-L will certainly help you make a decision on the purchase.
If you already are a holder of Pelco C417M-L, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco C417M-L.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco C417M-L. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco C417M-L along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
