Instruction/ maintenance manual of the product c3419m Pelco
Go to page of 16
INSTALLATION Heavy-Duty Spectra ® IV Series C3419M (8/06) In-Ceiling Back Box.
2 C3419M (8/06) Installation BACK MOUNTING PLA TES MOUNTING RING CEILING 1 5 36 4 2.
C3419M (8/06) 3 1. Locate the center point of the mounting location and insert the compass tool. Draw a circle. 2. Cut the circle out of the ceiling. 3. Use the mounting ring as a template and mark the screw hole pattern onto the mounting surface. Prepare the holes.
4 C3419M (8/06) 7 8 VIDEO UTP+ UTP- RX- RX- TX- TX- PWR- PWR+ GND AUX2 GND GND NO NC COM 7 6 5 4 3 2 1 ALARMS AUX1.
C3419M (8/06) 5 7. Install the back box by compressing the spring clips and pushing the back box through the hole. T ighten the screws until you hear a clicking noise. 8. Connect wiring to the circuit board inside the back box. When finished, close the door to the back box and turn on the power .
6 C3419M (8/06) TRIM LEASH BALL STUD BALL STUD RECEIVER BARREL KEY LOCK SWITCH 1 AND 2 11 9 10.
C3419M (8/06) 7 9. Configure DIP switches SW1 and SW2 located on the top of the dome drive. For DIP switch settings, refer to the labels located on the top of the dome drive or to the Switch Settings section of this manual. NOTE: When connecting more than one Spectra dome to a single controller , terminate the unit farthest from the controller .
8 C3419M (8/06) Switch Settings WARNING: If you are using D-type or P-type control, your system may not operate if the baud rate and address switches are not set correctly . The switches are set at the factory at the defaults for D-type control (2400 baud and address 1).
C3419M (8/06) 9 T able E. Switch Settings for SW1, P-T ype Control NOTE: For Coaxitron controls, SW1 is not used; set all switches OFF . For D-type control systems, refer to T able F. T able F . Switch Settings for SW1, D-T ype Control NOTE: For Coaxitron controls, SW1 is not used; set all switches OFF .
10 C3419M (8/06) SPECTRA ADDRESS SWITCH SETTING SW1-1 SW1-2 SW1-3 SW1-4 SW1-5 SW1-6 SW1-7 SW1-8 71 ON ON ON OFF OFF OFF ON OFF 72 OFF OFF OFF ON OFF OFF ON OFF 73 ON OFF OFF ON OFF OFF ON OFF 74 OFF O.
C3419M (8/06) 11 SPECTRA ADDRESS SWITCH SETTING SW1-1 SW1-2 SW1-3 SW1-4 SW1-5 SW1-6 SW1-7 SW1-8 151 ON ON ON OFF ON OFF OFF ON 152 OFF OFF OFF ON ON OFF OFF ON 153 ON OFF OFF ON ON OFF OFF ON 154 OFF .
12 C3419M (8/06) SPECTRA ADDRESS SWITCH SETTING SW1-1 SW1-2 SW1-3 SW1-4 SW1-5 SW1-6 SW1-7 SW1-8 223 ON ON ON ON ON OFF ON ON 224 OFF OFF OFF OFF OFF ON ON ON 225 ON OFF OFF OFF OFF ON ON ON 226 OFF ON.
C3419M (8/06) 13 Specifications GENERAL Construction Back Box Aluminum Dome Drive Aluminum, thermoplastic Lower Dome Clear polycarbonate, 0.090-inch thick Cage Thickness 0.12 x 0.30-inch cast stainless steel Cage Color Black, for maximum discreetness Cable Entry (Back Box) 0.
14 C3419M (8/06) The materials used in the manufacture of this document and its components are compliant to the requirements of Directive 2002/95/EC This equipment contains electrical or electronic co.
PRODUCT WARRANTY AND RETURN INFORMA TION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment.
W orldwide Headquarters 3500 Pelco W ay Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www .
An important point after buying a device Pelco c3419m (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco c3419m yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco c3419m - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco c3419m you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco c3419m will certainly help you make a decision on the purchase.
If you already are a holder of Pelco c3419m, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco c3419m.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco c3419m. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco c3419m along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
