Instruction/ maintenance manual of the product C2227M-D Pelco
Go to page of 4
C2227M-D (8/07) PMCL-CMP Monitor Mount and T elescoping Pole Important Safety Instructions 1. Read these instruction s. 2. Keep these instruction s. 3. Heed all warnings. 4. Follow all instructions. 5. Installation should be done only by qualif ied person nel and confor m to all local codes.
b. Use the following steps to attach the mounting flange to a steel I-beam ceiling: (1) Use the mou nting flan ge as a te mplate to mark the mounti ng holes on the I-beam. (2) Attach the mounting flange to the I-beam usin g 1/4-20 x 1-inch mach ine screws with nuts as shown in Figure 2 .
5. Hold the monitor level with the mounting head. Refer to one of the following and a ttach the monitor mou nt to the monitor . • 31-inch monitor or smaller: Align the monitor to the corr ect hole pattern on the mo unting plate. Use t he M4 x 10 mm s crews and spli t lock washers (supplied) to secure the mon itor to the mounting plat e.
Worldwide Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www .
An important point after buying a device Pelco C2227M-D (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco C2227M-D yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco C2227M-D - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco C2227M-D you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco C2227M-D will certainly help you make a decision on the purchase.
If you already are a holder of Pelco C2227M-D, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco C2227M-D.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco C2227M-D. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco C2227M-D along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
