Instruction/ maintenance manual of the product C1620M-B (9/05) Pelco
Go to page of 16
Endura ™ KBD5000 Series Keyboard INSTALLATION C1620M-B (9/05).
.
C1620M-B (9/05) 3 Contents Regulatory Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Description .
4 C1620M-B (9/05) Regulatory Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
C1620M-B (9/05) 5 Description The KBD5000 Series keyboard is the controller for Pelco’ s network-based video system products. It is the point from which all user functions can be accessed. The KBD5000 Series is configured with three control modules that are installed in receptacles on the keyboard base.
6 C1620M-B (9/05) PACKAGE CONTENTS When installing the KBD5000, refer to Figure 1. Figure 1. Package Components PRODUCT SERIAL NUMBER LABEL A label citing your unit’ s product serial number is attached to the bottom of your KBD5000 keyboard base.
C1620M-B (9/05) 7 Rear Panel Connectors Figure 3. Rear Panel Connectors Input power USB T ype A port USB T ype B port (Attaches to a VCD5000 or Endura Workstation [WS5000 Series]; use the supplied T ype B-to-T ype A adapter cable.
8 C1620M-B (9/05) Installation INSTALLING THE WRIST SUPPORT AND CONTROL MODULES The KBD5000 comes with three control modules that fit in three receptacles on the base. Y ou can choose which module will be located in which receptacle, and each module can be rotated ±60 degrees in each receptacle.
C1620M-B (9/05) 9 3. Refer to Figure 5. Select a module. Each receptacle on the base has an attached USB cable. T urn the module upside down. Plug the USB connector cable into the USB port on the bottom of the module. Thread the USB connector cable through the plastic strain reliefs on the module to hold the cable in place.
10 C1620M-B (9/05) CONNECTING THE KEYBOARD T o hook up the KBD5000, connect the USB T ype B-to-T ype A cable (supplied) from the USB connector on the rear of the KBD5000 to the USB connector on either the front or rear of the Pelco VCD5000 virtual console display or to the USB connector on an Endura Workstation (WS5000 Series).
C1620M-B (9/05) 11 Operation The following is only a simple guide. For details on operating the KBD5000, refer to the Pelco VCD5000 Virtual Console Display Operation manual, C1618M. KEYS The callouts in Figure 7 correspond to the reference numbers in T able A.
12 C1620M-B (9/05) OVERVIEW OF VCD5000 MENUS The KBD5000 works in conjunction with the VCD5000 virtual console display and its menus. • T o display the on-screen menu, press either Menu key on the jog/shuttle module. • T o hide the menu, press either Menu key on the jog/shuttle module.
C1620M-B (9/05) 13 T roubleshooting If the following instructions fail to solve your problem, contact Pelco T echnical Support for help at 1-800-289-9100, or 1-559-292-1981 if calling internationally . Y ou should have the serial number from the bottom of the keyboard ready in case it is needed.
14 C1620M-B (9/05) Specifications POWER SUPPL Y Input V oltage 100-240 V AC, 50/60 Hz Output V oltage 12 VDC Power Output 20 W Input Connector T ype Universal, interchangeable Output Connector T ype 2.5 mm screw-on barrel Cable T ype Supplied with grounded power cord; molded connector , 3 prongs, 6 ft (1.
This equipment contains electrical or electronic components that must be recycled properly to comply with Directive 2002/96/EC of the European Union regarding the disposal of waste electrical and electronic equipment (WEEE). Contact your local dealer for procedures for recycling this equipment.
W orldwide Headquarters 3500 Pelco W ay Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www .
An important point after buying a device Pelco C1620M-B (9/05) (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco C1620M-B (9/05) yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco C1620M-B (9/05) - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco C1620M-B (9/05) you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco C1620M-B (9/05) will certainly help you make a decision on the purchase.
If you already are a holder of Pelco C1620M-B (9/05), but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco C1620M-B (9/05).
However, one of the most important roles played by the user manual is to help in solving problems with Pelco C1620M-B (9/05). Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco C1620M-B (9/05) along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
