Instruction/ maintenance manual of the product C1445M-E (2/09) Pelco
Go to page of 12
INST ALLA TION C1445M-E (2/09) For EH8100 Series Pressurized Camera Enclosure PSKIT8100 Pressure Sensor Option.
.
C1445M-E (2/09) 3 Contents Important Safety Instructi ons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4 C1445M-E (2/09) Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions.
C1445M-E (2/09) 5 Description The PSKIT8100 pressure sensor is designe d for use wi th the EH8100 Series enclosure. The se nsor ensures that enclosure pressure stays at an acceptable operat ion level. The PSKIT8100 pr ovides contact closure when the internal pressure of the enclosure falls below the required 5 psi.
6 C1445M-E (2/09) Pressure Sensor Installation T o install t he press ure sens or: 1. Remove the screw located inside the top portio n of the enclosure’ s rear plate (refer to Figure 2). Insert the pressure sensor tube fitting into the hole. 2. Loosen the camera sled mounting screws (refer to Figure 2).
C1445M-E (2/09) 7 Figure 3 . EH8100 Series Enclosur e: Wiring Diagram NOTES: • Consult the C1420M manual section dealing wi th model number listings for the wattage and number of heaters for the particular model that you are using. • T erminal block only on the EH8106.
8 C1445M-E (2/09) Enclosure Reassemb ly and Recharging REASSEMBLY When the enclosure is disassembled, it should be recharged after reassembly and prior to installation. Recharging requires the use of a Pel co EH8000RKIT recharge kit (or equi valent ) and applicable O-ring kit, part EH8004ORKIT or EH8006ORKIT .
C1445M-E (2/09) 9 REVISION HISTORY Manual # Date Comments C1445M 12/95 Original version. C1445M-A 5/96 Updated to include correct ions to referenc e callouts in Sec tion 3.4. Updated Figure 3. All changes in re sponse to ECO# 95 -220 and 96-1 31. C1445M-B 5/96 Revised to include updated Fi gures 2 and 4.
10 C1445M-E (2/09).
PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merc handise proved defective in ma terial or wor kmanship for a period of one year after the date of shipment.
Pelco, Inc. W orldwide Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada T el (800) 289-9100 Fax (800) 289-9150 International T el +1 (559) 292-1981 Fax +1 (559) 348-1120 www .
An important point after buying a device Pelco C1445M-E (2/09) (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco C1445M-E (2/09) yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco C1445M-E (2/09) - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco C1445M-E (2/09) you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco C1445M-E (2/09) will certainly help you make a decision on the purchase.
If you already are a holder of Pelco C1445M-E (2/09), but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco C1445M-E (2/09).
However, one of the most important roles played by the user manual is to help in solving problems with Pelco C1445M-E (2/09). Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco C1445M-E (2/09) along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
