Instruction/ maintenance manual of the product C1431M-C (8/04) Pelco
Go to page of 16
EH5700 Series Envir onmental Enclosur e Installation/ Operation Manual C1431M-C (8/04) Pelco • 3500 Pelco Way, Clovis • CA 93612-5699 USA • www.pelco.
2 Pelco Manual C1431M-C (8/04) CONTENTS Section Page GENERAL ................................................................................................... 3 IMPORT ANT SAFEGUARDS AND WARNINGS ............................................... 3 DESCRIPTION .
Pelco Manual C1431M-C (8/04) 3 Please thoroughly familiarize yourself with the information in this manual prior to installation and operation. GENERAL IMPORT ANT SAFEGUARDS AND W ARNINGS Prior to installation and use of this product, the following W ARNINGS should be observed.
4 Pelco Manual C1431M-C (8/04) DESCRIPTION Environmental enclosures in the EH5700 Series are used with Pelco’s pan/tilt units or fixed mounts. The enclosures are constructed of aluminum. Y ou can install cameras with either fixed focal length lenses or motorized zoom lenses.
Pelco Manual C1431M-C (8/04) 5 INST ALLA TION 1. Unlatch and raise the enclosure lid. The gas spring will hold the lid in place when it is fully opened. 2. Remove the camera sled from the rail: a. Loosen the screws. b. Slide the sled so that the screws are in the large part of the mounting slots.
6 Pelco Manual C1431M-C (8/04) Figure 1. Exploded Assembly Diagram for Blower and Circuit Board A B C 5 C 4 D B 3 A B RED 22 GA. (1 FT .) BLACK 22 GA. (1 FT .
Pelco Manual C1431M-C (8/04) 7 7. Install the sled and camera/lens in the enclosure: a. If the camera’s lens is adjustable, extend the lens to its maximum length. b. Place the sled over the mounting screws in the enclosure. c. Slide the sled forward until the camera’s lens almost touches the window .
8 Pelco Manual C1431M-C (8/04) When the power requirements are the same, there are two ways to connect power: (1) A three-pin plug is supplied as loose equipment.
Pelco Manual C1431M-C (8/04) 9 If the camera’s power is connected to CAM 1 on the circuit board, add the camera’s wattage to the power consumption of the accessories to determine the size of wire to use. If you are using 24 V AC, refer to T able A to determine the size of wire to use.
10 Pelco Manual C1431M-C (8/04) Figure 2. EH5700 Series Input Wiring Diagram KIT # BK57-2 KIT # BK57-1 (120 V) KIT # BK57-3 (230 V) FA N 24 VDC FA N 120/230 V PCB9000277ASSY RED BLK RED BLK 1 2 PLUG 1.
Pelco Manual C1431M-C (8/04) 11 W ire Gauge Maximum distance from transformer to load T able A. 24 V AC Wiring Distances The following are the recommended maximum distances for 24 V AC applications and are calculated with a 10-percent voltage drop. (10-percent is generally the maxi- mum allowable voltage drop for AC-powered devices.
12 Pelco Manual C1431M-C (8/04) OPERA TION If your enclosure has a thermostatically controlled blower , the thermostat is set to turn the fan on between 77 ° and 93 ° F (25 ° and 34 ° C) and to turn the fan off be- tween 62 ° and 78 ° F (17 ° and 26 ° C).
Pelco Manual C1431M-C (8/04) 13 MAINTENANCE Perform the following maintenance at regularly scheduled intervals to prolong the operational life and appearance of the equipment. 1. Clean the window with a mild non-abrasive detergent in water and a soft cloth to maintain picture clarity .
14 Pelco Manual C1431M-C (8/04) SPECIFICA TIONS ELECTRICAL Input Voltage: 24, 120 or 230 VAC, 50/60 Hz Electrical Connections: One each of the following when equipped with optional circuit board (O/I-.
Pelco Manual C1431M-C (8/04) 15 Latches: Stainless Steel Dimensions: See Figure 3 Weight Unit Shipping EH5723: 11 lbs (4.99 kg) 12 lbs (5.44 kg) EH5723-1, -2, -3: 13 lbs (6.37 kg) 15 lbs (6.80 kg) EH5729: 16 lbs (7.26 kg) 18 lbs (8.16 kg) EH5729-1, -2, -3: 18 lbs (8.
16 Pelco Manual C1431M-C (8/04) REVISION HISTOR Y Manual # Date Comments C1431M 6/95 Original manual. C1431M-A 3/96 Revision A. Expanded installation instructions; added troubleshooting section; changed heater specifications. 4/96 Added Figure 6A and warning note to window wiper installation instructions.
An important point after buying a device Pelco C1431M-C (8/04) (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco C1431M-C (8/04) yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco C1431M-C (8/04) - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco C1431M-C (8/04) you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco C1431M-C (8/04) will certainly help you make a decision on the purchase.
If you already are a holder of Pelco C1431M-C (8/04), but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco C1431M-C (8/04).
However, one of the most important roles played by the user manual is to help in solving problems with Pelco C1431M-C (8/04). Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco C1431M-C (8/04) along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center