Instruction/ maintenance manual of the product 2 C2485M-A (1/05) Pelco
Go to page of 8
® INST ALLA TION MANUAL Pressurized Spectra III ™ Series Fiber Optic Models C2485M-A (1/05).
2 C2485M-A (1/05).
C2485M-A (1/05) 3 W elcome Thank you for purchasing Pelco’ s Pressurized Spectra III ™ Series dome system with feedthrough for fiber optic modules with an ST -type connector . Y our new system provides ultimate protection of the camera optics and electronics from moisture, corrosive gases, and airborne contaminants.
4 C2485M-A (1/05) Preinstallation 1 Install the fiber optic module: Open the hinged door to the back box by pushing the tab lock towards the wall of the unit and lifting the door open. Remove the plug from the 16-pin connector . Install the module in the 16-pin connector .
C2485M-A (1/05) 5 5 Install the dome drive: a. Set the DIP switches located on the side of the dome drive. Refer to the labels located on the top of the dome drive or to the Quick Start Guide shipped with the dome drive. b. Line up the blue (A) and red (B) tabs with the blue (A) and red (B) labels.
6 C2485M-A (1/05) Site Installation 1 Feed a fiber optic cable (not supplied) and the supplied wiring harness into the front of the mount and out the back of the mount. Connect the wires as required. Refer to T ables A, B, and C for cable and wiring information.
C2485M-A (1/05) 7 NOTE: These are the recommended maximum distances for 24 V AC appli- cations and are calculated with a 10 percent voltage drop. (T en percent is generally the maximum allowable voltage drop for AC-powered devices.) NOTE: Input power for the dome is 24 V AC only .
World Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www .
An important point after buying a device Pelco 2 C2485M-A (1/05) (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco 2 C2485M-A (1/05) yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco 2 C2485M-A (1/05) - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco 2 C2485M-A (1/05) you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco 2 C2485M-A (1/05) will certainly help you make a decision on the purchase.
If you already are a holder of Pelco 2 C2485M-A (1/05), but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco 2 C2485M-A (1/05).
However, one of the most important roles played by the user manual is to help in solving problems with Pelco 2 C2485M-A (1/05). Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco 2 C2485M-A (1/05) along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
