Instruction/ maintenance manual of the product SF 16D Peerless Industries
Go to page of 9
Max. Load Capacity: 200 lb (90.7 kg) 3215 W. North Ave. • Melrose Park, IL 60160 • (800) 729-0307 or (708) 865-8870 • Fax: (708) 865-2941 • www.
2 of 9 ISSUED: 08-02-05 SHEET #: 202-9010-1 Note: Read entire instruction sheet before you start inst allation and assembly . T ools Needed for Assembly • stud finder ("edge to edge" stud .
3 of 9 ISSUED: 08-02-05 SHEET #: 202-9010-1 CC DD De s c ri pti o n Q ty. P a r t # AA wall pl at e 1 200-17 97 BB int erf ac e plat e 1 200-08 60 CC #14 x 2.
4 of 9 ISSUED: 08-02-05 SHEET #: 202-9010-1 Inst allation to Single Wood Stud W all 1 Use a stud finder to locate the edges of the stud. Use of an edge-to-edge stud finder is highly recommended. Based on its edges, draw a vertical line down the stud’ s center .
5 of 9 ISSUED: 08-02-05 SHEET #: 202-9010-1 Inst allation to Double Wood Stud W all 1 Wall plate ( AA ) can be mounted to two studs that are 16" apart. Use a stud finder to locate the edges of the studs. Use of an edge-to-edge stud finder is highly recommended.
6 of 9 ISSUED: 08-02-05 SHEET #: 202-9010-1 Inst allation to Solid Concrete or Cinder Block 1 Make sure that wall plate ( AA ) is level, use it as a template to mark four mounting holes. The top mounting hole should be 2.5" above the desired screen center as shown in figure 1.
7 of 9 ISSUED: 08-02-05 SHEET #: 202-9010-1 T o prevent scratching the screen, set a cloth on a flat, level surface that will support the weight of the screen. Place screen face side down. Attach the interface bracket ( BB ) to the PLP adapter plate (sold separately) using four M10 x 15 mm socket head screws ( EE ) as shown in figures 2.
8 of 9 ISSUED: 08-02-05 SHEET #: 202-9010-1 T o prevent scratching the screen, set a cloth on a flat, level surface that will support the weight of the screen. Place screen face side down. Attach the interface bracket ( BB ) to the LC adapter plate (sold separately) using four M5 screws provided with plate as shown in figures 2.
9 of 9 ISSUED: 08-02-05 SHEET #: 202-9010-1 Mounting and Removing Flat Panel Screen Note: Security screw may need to be loosened to avoid interference with wall plate. Hook interface bracket ( BB ) onto wall plate ( AA ). Then slowly swing screen in as shown.
An important point after buying a device Peerless Industries SF 16D (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Peerless Industries SF 16D yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Peerless Industries SF 16D - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Peerless Industries SF 16D you will learn all the available features of the product, as well as information on its operation. The information that you get Peerless Industries SF 16D will certainly help you make a decision on the purchase.
If you already are a holder of Peerless Industries SF 16D, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Peerless Industries SF 16D.
However, one of the most important roles played by the user manual is to help in solving problems with Peerless Industries SF 16D. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Peerless Industries SF 16D along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
