Instruction/ maintenance manual of the product PLAV 60-S Peerless Industries
Go to page of 9
3215 W. North Ave. • Melrose Park, IL 60160 • (800) 729-0307 or (708) 865-8870 • Fax: (708) 865-2941 • www.peerlessmounts.com ISSUED: 05-02-06 SHEET #: 202-9112-3 12-05-06 Models: PLA 60, PLA .
2 of 9 ISSUED: 05-02-06 SHEET #: 202-9112-2 06-21-06 Read instruction sheet before you st art inst allation and assembly . Installations: To Wood Stud Walls ..............................................................................................
3 of 9 ISSUED: 05-02-06 SHEET #: 202-9112-3 12-05-06 P D Before you start make sure all parts listed are included with your product. Part s List K M S C A E F H B J N R L Q Some parts may appear slightly different than illustrated. G O PLA 60 PLA 60-S PLAV 60 PLAV 60-S DESCRIPTION QTY.
4 of 9 ISSUED: 05-02-06 SHEET #: 202-9112-2 06-21-06 • Installer must verify that the supporting surface will safely support the combined load of the equipment and all attached hardware and components. • Tighten wood screws so that wall plate is firmly attached, but do not overtighten.
5 of 9 ISSUED: 05-02-06 SHEET #: 202-9112-3 12-05-06 IMPORTANT! Concrete must be 2000 psi density minimum. Use wall plate ( A ), making sure that it is level, as a template to mark holes. The top mounting slots should be located .36" above the desired screen center for PLA 60 and PLA 60-S and .
6 of 9 ISSUED: 05-02-06 SHEET #: 202-9112-2 06-21-06 Snap four cable management clips ( R ) into top or bottom of arm assembly ( C ) as shown . Cable ties ( S ) are used with clips for cord management. Slide one mesh sleeve ( T ) over each cable. Use cable ties ( S ) to tighten mesh sleeves to cables.
7 of 9 ISSUED: 05-02-06 SHEET #: 202-9112-3 12-05-06 B I F GENERIC ADAPTER BRACKET Insert and tape carriage bolt ( I ) into top hole of pitch-roll assembly ( B ). Attach tilt-roll assembly to adapter bracket with four M10 socket screws ( F ). Tighten screws using 6 mm allen wrench ( U ).
8 of 9 ISSUED: 05-02-06 SHEET #: 202-9112-2 06-21-06 Insert two M10 screws ( F ) into swivel box on arm assembly ( C ) as shown. Leave approx. 1/4" of exposed thread. .25" F • Use an assistant or mechanical lifting equipment to safely lif t and position the plasma TV .
9 of 9 ISSUED: 05-02-06 SHEET #: 202-9112-3 12-05-06 FOR PLA V 60 ONL Y : 7 7-1 ARTICULA TING ARM PLASMA 8 Depending on the specific size & weight of the plasma, articulating swing arm may be angled at different positions, causing plasma to appear to lean sideways at different articulating positions.
An important point after buying a device Peerless Industries PLAV 60-S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Peerless Industries PLAV 60-S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Peerless Industries PLAV 60-S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Peerless Industries PLAV 60-S you will learn all the available features of the product, as well as information on its operation. The information that you get Peerless Industries PLAV 60-S will certainly help you make a decision on the purchase.
If you already are a holder of Peerless Industries PLAV 60-S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Peerless Industries PLAV 60-S.
However, one of the most important roles played by the user manual is to help in solving problems with Peerless Industries PLAV 60-S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Peerless Industries PLAV 60-S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
