Instruction/ maintenance manual of the product TU2-400 PC Concepts
Go to page of 9
M73-APO08-560 TU2-400 USB 2.0 4-Port HUB User’s Guide.
REGULATORY STATEMENTS FCC Certification Part15, Class B The United States Federal Communication Commission (FCC) and the Canadian Department of Communication s have established certain rules governing the use of electronic equipment. FCC Part 15 Registration This device complies with Part 15 of FCC rules.
- 1 - PRECAUTIONS 1. The USB 2.0 cable that came with this device is a High Speed Cable. In case that a different length of cable is required, make sure the replacement complies with the USB specification version 2.0 to avoid malfunction. 2. The device drivers that drive this device are provided by your operating system.
- 2 - INTRODUCTIONS Welcome to the Universal Serial Bus (USB) HUB, an easy plug and play external simple device that allowed your com puter to connect to USB Interfaced monitors, printers, digital speakers, modem s, digital cameras, joysticks or multimedia equipment.
- 3 - All Downstream ports support full-speed (12Mbps) and low-speed (1. 5Mbps) as well as high-speed (480Mbps) Supports Suspend and Resume Operations Supports 1 upstream and 4 d ownstream.
- 4 - INSTALLATION Installation of the USB Hu b is easy. Self- Powered mode is available for you to install the USB Hub. Each dow nstream port is 50 0mA (max) supplied. This po wer is sufficient enoug h to support most of the USB devices. 1. Plug the DC end of the power adapter in to the DC jack of the Hub.
- 5 - 5. Connect USB devices to "downstream port " (1-4 port) of the Hub..
- 6 - SPECIFICATIONS Ports: 4 down stream ports with USB type A receptacles 1 upstream port with USB type B receptacle LED Indicators: Self-powered: Glows amber when PC is powered on and Power adapter is ready High speed: G lows green when upstream port is linked to USB 2.
- 7 - Each dow nstream port of DC +5V , 500mA (Max.) supply EMC Certifications: FCC Part 15 Class B CE (EN55022/EN55024) VCCI-B.
An important point after buying a device PC Concepts TU2-400 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought PC Concepts TU2-400 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data PC Concepts TU2-400 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, PC Concepts TU2-400 you will learn all the available features of the product, as well as information on its operation. The information that you get PC Concepts TU2-400 will certainly help you make a decision on the purchase.
If you already are a holder of PC Concepts TU2-400, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime PC Concepts TU2-400.
However, one of the most important roles played by the user manual is to help in solving problems with PC Concepts TU2-400. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device PC Concepts TU2-400 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
