Instruction/ maintenance manual of the product Monarch 6015TM Paxar
Go to page of 2
TC6015OI Rev. AB 3/01 2001 Monarch Marking Systems, Inc. All righ ts reserved. OPER ATING INSTRUCTIONS Use these operating instructions with your Monarch 6015 Printer. The printer works with the Symbol SPT 1500 or the Palm III series of organizers.
10 - Pin Connector + (Positive) ends facing this way 3. Moisten a cotton swab with isopropyl alcohol and clean the printhead as s hown. 4. Clean the platen roller with a dry cloth or small brush. You can also use a cotton swab moistened with isopropyl alcohol.
An important point after buying a device Paxar Monarch 6015TM (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Paxar Monarch 6015TM yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Paxar Monarch 6015TM - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Paxar Monarch 6015TM you will learn all the available features of the product, as well as information on its operation. The information that you get Paxar Monarch 6015TM will certainly help you make a decision on the purchase.
If you already are a holder of Paxar Monarch 6015TM, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Paxar Monarch 6015TM.
However, one of the most important roles played by the user manual is to help in solving problems with Paxar Monarch 6015TM. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Paxar Monarch 6015TM along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
