Instruction/ maintenance manual of the product 403606-10 Paslode
Go to page of 15
P Operating and Maintenance Manual PNEUMA TIC T OOLS 403606-10 08/02.
P ASLODE MODEL NUMBER DESIGNA TION The model number of each Paslode tool contains information about the tool and the fasteners that are used with it. The following example illustrates the information contained in this tool model number.
INTR ODUCTION Congratulations on purchasing a Paslode pnuematic tool. Y ou have made a wise choice. A Paslode tool is a professional quality tool that combines power and speed in a light weight design for versatile operation in a variety of industial and construction applications.
W ARNING Failure to follow any of the above instructions could result in severe personal injury to tool user and bystanders or cause damage to tool and property .
5 AIR SYSTEMS For air-powered tools to work their best, the air supply system must be properly installed and maintained regularly . A drawing in this section shows a properly installed air supply system. Handy checklists for installing and maintaining air supply systems follow .
AIR SYSTEMS - Continued Calculating Compressor Size Use the air consumption chart in the T ool Schematic for each tool when calculating the operating requirements for the tools. Paslode tools are designed to operate efficiently between 80 and 120 psi and should never be operated at pressure greater than 120 psi.
T OOL INST ALLA TION Y our Paslode tool comes ready for immediate use and can be installed by following these steps: 1. SAFETY - All tool operators and their immediate supervisors must become familiar with the operator safety instructions before operating the tool.
Precision Placement Driving ■ Grasp the tool handle firmly and hold the bottom of the work contacting element firmly against the workpiece until it is com- pletely depressed. ■ Squeeze the trigger to drive the fastener. ■ Lift the tool from the workpiece.
Coil Nailers Step No. 1 – Grasp the nailer handle firmly with one hand and with the other hand unlatch the magazine cover clip. Swing the magazine door open. Step No. 2 – Adjust the loading tray for nail length (if required) by depressing the button on the post and raising or lowering the tray to the desired position.
T250-F16 Series Finish Nailer Step No. 1 – Grasp the nailer firmly with one hand. Step No. 2 – Insert the strip with the point of the fastener facing down towards the bottom of the magazine. Step No. 3 – Hold the follower firmly and press the follower latch.
2000 Series Stapler Step No. 1 – Grasp the stapler firmly with one hand. Depending on the model,either squeeze the latch with your small finger or press it with your thumb With your other hand, pull the magazine back towards you. Step No. 2 – Insert the fastener strip into the magazine rail.
MAINTENANCE Paslode ® tools are built for ease of maintenance. A few simple details will assure trouble-free operation and long tool life. Anyone who uses or maintains the tool must read the safety and maintenance instructions. Study the sche- matic drawing before starting any repairs on the tool.
MAINTENANCE - Continued Drain air line filter(daily). Keep lubricator filled. Clean filter element-then blow air through filter in direction opposite to normal flow. Check that all screws on tool are tight. Keep work contacting elelment working properly.
OPERA T OR TROUBLESHOO TING PR OBLEM CORRECTIVE A CTION Fasteners will not drive completely into wood. Fasteners penetrate properly during normal operation, but won't drive fully at faster speeds. Fasteners drive too deeply into wood. Fastener jams in nose of tool.
TOOL W ARRANTY T OOL W ARRANTY AND LIMIT A TIONS An Illinois T ool Works Company 888 Forest Edge Drive V ernon Hills, Illinois 60061 P 15.
An important point after buying a device Paslode Paslode 403606-10 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Paslode Paslode 403606-10 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Paslode Paslode 403606-10 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Paslode Paslode 403606-10 you will learn all the available features of the product, as well as information on its operation. The information that you get Paslode Paslode 403606-10 will certainly help you make a decision on the purchase.
If you already are a holder of Paslode Paslode 403606-10, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Paslode Paslode 403606-10.
However, one of the most important roles played by the user manual is to help in solving problems with Paslode Paslode 403606-10. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Paslode Paslode 403606-10 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
