Instruction/ maintenance manual of the product SANTO K 40-5i Parkinson Cowan
Go to page of 24
User Manual Fridge Freezer SANT O K 9 18 40-5 i.
2 Dear Customer Thank you for choosing one of our high-quality products. With this appliance you will experience the perfect combination of func- tional design and cutting edge technology . Convince yourself that our appliances ar e engineered to deliver the best performance and control - indeed we ar e setting the highest standards of excellence.
3 Contents Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Dis posal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Appliance P ackaging Information .
4 Safety Please read this instruction book befor e using the appliance and retain for future r eference. These warnings are pr ovided in the interests of your safe- ty , ensure you under stand them fully before using the appliance. Intended u se • The appliance is intended for use in the home.
5 Daily Oper ation • Containers with flammable gases or liquids can leak at low temper atures. There is a risk of an explosion! Do not stor e any containers with flamma- ble materials such as, spray cans, fir e extinguisher refill cartridges etc in the refriger ator/freezer .
6 Remove tr ansport packaging The appliance and the interior fittings are pr otected for transport. • Remove all adhesive tape and packing pieces from the interior of the appliance. Shelf holders Y our appliance is equipped with shelf retainer s that make it possible to secure the shelves during tr ansporta- tion.
7 Starting up and temper atur e regulation Wash the inside of the appliance with lukewarm water with a little bicar- bonate of soda added (5ml to 0,5 litre of water). Do not use soap or deter- gent as the smell may linger . Dry the appliance thoroughly .
8 Interior Accessories Stor age Shelves The glass shelf above the fruit and vegetable compartment should always remain in position, to ensur e fruit and vegetables stay fresh longer . The remaining stor age shelves can be adjusted to various heights: Pull the storage shelf forwar d until it can be tipped up or down and remo- ved.
9 Butter and cheese: these should be placed in special airtight container s or wrapped in aluminium foil or polythene bags to exclude as much air as pos- sible. Milk bottles: these should have a cap and should be stored in the bottle rack on the door .
10 1. Place the packed food in the drawer s. Place food to be frozen in the upper drawer . Unfr ozen food must not touch items already frozen, otherwise the frozen food could begin to defr ost. 2. Place frozen foods in the dr awers sorted by type, as far as possible.
11 4. Turn the thermostat knob to the r equired setting and replace the plug in the power socket. Warning! Never use metal tools to scrape off the fr ost Do not use a mechanical device or any artificial means to speed up the thawing process other than those r ecommended by the manufacturer .
12 – cleansers which contain acetic acid. Do not allow such substances to come into contact with appliance parts. • Many proprietary kitchen surface cleaner s contain chemicals that can attack/damage the plastics used in this appliance.
13 Something Not W orking If the appliance is not functioning correctly , please carry out the following checks before contacting your local AEG Service For ce Centre. Warning! Repairs should only be carried out by qualified service engineer s. Repairs carried out by inexperienced persons may cause injury or serious malfunc- tioning.
14 If, after carrying out the necessary checks there is still a fault with your appliance please contact your local AEG Service Force Centr e. In guarantee cu stomers should en sure that the suggested checks have been made as the engineer will make a charge if the fault i s not a mechanical or electrical breakdown.
15 Service and Spar e P arts In the event of your appliance requiring service, or if you wish to pur chase spare parts, please contact your local Service For ce Centre by telephoning: 087 0 5 929929 Y our telephone call will be automatically routed to the Service Force Cen- tre covering your post code ar ea.
16 Guar antee Conditions Guar antee Conditions AEG offer the following guarantee to the fir st purchaser of this appliance. 1. The guarantee is valid for 12 months commencing when the appliance is handed over to the first r etail purchaser , which must be verified by pur chase invoice or similar documen- tation.
17 Installation Electrical Connection Any electrical work requir ed to install this appliance should be carried out by a qualified electrician or competent person. WARNING – THIS APPLIANCE MUST BE EARTHED The manufacturer declines any liability s hould these safety measures not be observed.
18 Housing dimensions Height 1780 mm Depth 550 mm Width 560 mm P ositioning This appliance should only be installed at a location where the ambient temperatur e corresponds to the climate classification indicated on the rat- ing plate, which is located on the inside left of the appliance.
19 Inner door r eversal 1. Using a screwdriver r elease bracket (1) by pressing on the internal spring and withdraw it fr om its seat together with the door; remove plug (2) and fit it in the hole left open on the opposite side; turn the door through 180°, r emove the bracket (1) and refit it on the opposite side.
20 Fit the appliance in the niche by making sure that it stands against the interior surface of the unit on the side where the door hinges of the appliances are fitted. Insert the appliance until the upper strip butts up against the unit (1) and make sure that the lower hinge is in line with the surface of the unit (2).
21 B E C D Apply covers (C-D) into the r elevant holes. Snap ventilation grille (B) and hinge cover (E) into position. Separate parts Ha,Hb , Hc, Hd as shown in the figure PR266 Ha Hb Hc Hd I P Fasten the appliance with 4 screws provided in the kit included with the appliance.
22 Open the appliance door and the fur- niture door at 90°. Insert the small square (Hb) into guide (Ha). Put together the appliance door and the furniture door and mark the holes as indicated in the figure. Remove the squares and drill holes with ø 2 mm at 8 mm from the out- er edge of the door .
23 Regulations , Standar ds, Guidelines This appliance was designed for household use and was manufactured in accordance with the appr opriate standards.
www .electr olux.com www .aeg-electrolux.co.uk 2223 22 1-43-00-20 12200 7 Subject to change without notice.
An important point after buying a device Parkinson Cowan SANTO K 40-5i (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Parkinson Cowan SANTO K 40-5i yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Parkinson Cowan SANTO K 40-5i - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Parkinson Cowan SANTO K 40-5i you will learn all the available features of the product, as well as information on its operation. The information that you get Parkinson Cowan SANTO K 40-5i will certainly help you make a decision on the purchase.
If you already are a holder of Parkinson Cowan SANTO K 40-5i, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Parkinson Cowan SANTO K 40-5i.
However, one of the most important roles played by the user manual is to help in solving problems with Parkinson Cowan SANTO K 40-5i. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Parkinson Cowan SANTO K 40-5i along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
