Instruction/ maintenance manual of the product EVO48 Paradox Hellas S.A.
Go to page of 36
We hope this product performs to your complete satisfa ction. Should you have any questions or comments, please visit www .paradox.com and send us your comments.
.
T able of Content s Introduction ................ .............. ......... 2 Legend ............... ................ ................ ............... 2 Basic Operation .......... .............. ......... 3 Confidential Mode .............. ... .... ...
2 User Guide 1.0 Introduction Y our EVO System is an advanced technology security system th at will provide you with reliable security protection and powerful features that are easy to use. The elegant and user -friendly keyp ads will allow you easy access to your security system's functions and information at the touch of a button.
EVO Systems 3 2.0 Basic Operation The following sections will introduce you to the functions of the buttons, light s, and messages on your keypad. Figure 1: LCD Keypad Basic Overview Figure 2: DGP2-648BL LED Keyp ad Overview The LCD screen will guide you with detail ed messages.
4 User Guide 2.1 Auditory Feedback (Beep T ones) When you enter information on the keyp ad, the keyp a d will guide you with beep tones to communicate the acceptance or rejection of your entries.
EVO Systems 5 3.0 MG-REM2 Feedback If your system includes the Wireless Zone Expansion module (MG-RTX3), it will be able to support the T wo-W ay Remote Control (MG-REM2). This remote allows you to change the status of the system, and it also provides visual and auditory feedback.
6 User Guide 4.0 Partitioned System Y our inst a ller can set your keypad to recognize sep arate protected areas. A separated system is called a partitioned system, which can be useful in situations where shared security system s are more practical.
EVO Systems 7 5.0 Arming When your system is armed, it can respond to any breach in the protected zones by causing an alarm and sending a report to your monitoring station. 5.1 Exit Delay Timer When you arm your system, it will trigger the Exit Delay T imer to provide you with enough time to exit the protected area before the system is armed.
8 User Guide 3. Enter the zone number (i.e. 01, 02,...96), or use the [ S ] and [ T ] buttons and press [ BYP ] once the zone you want to bypass appears on the screen. If b yp assed , the byp light does not appear on the screen and the keypad emit s a rejection beep, you may not have access to bypass that zone.
EVO Systems 9 5.8 Auto-Arming If enabled by your installer , you can set the time that an area will arm itself automatically . 5.8.1 Timed Auto-Arming Y our inst aller can set Timed Auto-Arming to function in either Force or S t ay arming mode.
10 User Guid e 6.0 Disarming When your system is disarmed, it deactivates any alarms in progress, and it deactivates the zones so the alarm will not be triggered if zones are breached. 6.1 Entry Delay Timer Y our inst aller will program designated entry points (i.
EVO Systems 11 7.0 Access Codes Access Codes allow access to the system. Y our system support s up to 999 user access codes. Codes are given a User Number between 002 and 999 (User Number 001 is the System Master Code). Y our installer will program user access codes to be four , six, or variables of one to six digits in length.
12 User Guid e 4. Press the [ S ] button to move the cursor to a new space. 5. Repeat steps 2 and 3 until the desired label is complete. 6. Press the [ ENTER ] button to save and exit. 7.3.1 Keypad Buttons Every numeric button on the LCD keypads is assigned a set of letters.
EVO Systems 13 T able 3: S pecial Characters Catalogue 7.4 Deleting User Access Codes T o delete user access codes, follow steps 1 to 4 in section 7.5.1 on page 14, but press the [CLEAR] button in S tep 4. Once the info rmation is erased, press the [ENTER] button to save and exit.
14 User Guid e 7.5.1 Programming User Settings LCD LED Note: - For a detai l ed descr ipti on o f t he Acce ss Con tro l NOTE: If no area is assigned, and if PGMs are programmed by your installer, the user can only control the PGMs. Refer to section 10.
EVO Systems 15 7.6 User Options Options [1] and [2] : Master Feature When option [1] is OFF , the User cannot program other users into the system. When option [1] is ON and option [2] is OFF , the user can program and modify user access codes (P .I.N.
16 User Guid e Option [3] : Card with Extended Unlocked Period When option [3] is ON , “Extended Unlocked Period” is enabled. “Extended Unlocked Period” refers to the time period programmed into each Access Control door by your installer that extends the unlocked time of the door .
EVO Systems 17 8.0 Using Access Control 8.1 Entering & Exiting Depending on how your system is installed and on the type of keyp ad, there are various ways to enter and exit Access Control doors: • Present your Access Control card to the reader or the EVO641R or DGP2-641RB keypad.
18 User Guid e 8.3 How Access Control Works T o illustrate how Access Control functions, we will use three simple Access Control System examples: Figure 3: Example A Bonnie’s Access Control card is programmed with Access Level 01 and Schedule 01.
EVO Systems 19 9.0 T roub le Display 9.1 T rouble Display If your system experiences any problems, Tr ouble(s) [TRBL] t o View will appear on the screen, or the T RBL action light will illuminate. The Trouble Display will only display the troubles that occur in the area(s) to which the keypad has been assigned.
20 User Guid e 9.1.6 Group 8: Cloc k Loss The time and date have been reset to the default. This is the only trouble that we recommend that you correct. Cl ock Loss [8] t o Set will appear on the LCD screen after you press the [ TRBL ] button or the [] key .
EVO Systems 21 10.0 Additional Features 10.1 Programmable Outputs (PGMs) Y our system includes Programmable Outputs (PGMs) that can be programmed by your installer .
22 User Guid e On the DGP2-648BL LED keypad, follow this procedure : 1. Enter your [ ACCESS CODE ] and press the [ TRBL ] button. 2. Press the [8] button. 3. Enter the hour and minutes according to the 24-hour clock (i.e. 9AM is 09:00 and 9PM is 21:00).
EVO Systems 23 1 1.0 VDMP3 Plug-In V oice Dialer The VDMP3 is a voice-assisted module t hat can be programmed to call up to 8 telephone numbers in the event of an alarm. Y ou can also call the VDMP3 from an outside line, enabling you to arm or disarm the system as well as activate up to 8 PGMs.
24 User Guid e.
EVO Systems 25 12.0 T esting and Maintenance 12.1 Burglar Alarm T esting T wo people are needed to complete this test. One person will watch the screen on the keypad while the other person walks around the protected areas and opens the zones (i.e. opens the doors and windows that are protected, walk in the path of the motio n detectors, etc.
26 User Guid e 13.0 Fire and Burglar Alarms 13.1 St andard Fire Zone During a fire alarm, the bell/siren emits an intermittent sound ( BEEP - BEEP - BEEP ) until silenced or reset. If the zone is a S tandard Fire Zone, your system can immediately send an alert to your monitoring station.
EVO Systems 27 Figure 7: Delaye d Fire Zone 13.4 Minimizing Home Fire Hazards How can you avoid the three most common causes of fires at home? • Never leave cooking food unattended. It’ s the leading cause of fire injuries. Cooking fires often result from unattended cooking and human error , rather than mechanical failure.
28 User Guid e Appendix 1: Hebrew Special Characters Refer to the following tables when programming the user labels of a Hebrew LCD keypad. Instead of using T able 2 on page 12 and T able 3 on page 13, use T ables 9 and 10 below . Refer to section 7.3 on p age 1 1 for information on programming user labels.
EVO Systems 29 Appendix 2: Russia n S pecial Characters Refer to the following tables when programming the user labels of a Russian LCD keypad. Instead of using T able 2 on page 12 and T able 3 on page 13, use T ables 1 1 and 12 below . Refer to section 7.
30 User Guid e Appendix 3: Greek S pecial Characters Refer to the following t ables when programming the user l abels of a Greek LCD keypad. Instead of using T able 2 on page 12 and T able 3 on page 13, use T ables 13 and 14 below . Refer to section 7.
EVO Systems 31 Index A Access Codes Delet ing .................................................................................. 1 3 Labelling ................................................................................ 11 Programming ............
EVO Systems 32 M Master Code ............................................................. ..................... 1 1 Master Feature, in User Options .......... .......................................... 15 MG-REM2 Feedback ............................
EVO Systems 33 W arranty For complete warranty inform ation on this product please refer to the Limited Warranty S tatement found on the website www .parad ox.com/terms. Y our use of the Par adox product signifies your acceptance of all warranty terms and cond itions.
Printed In Canada - 1 1/2007 paradox.com EVO-EU02 For technical support in Canada or the U.S., call 1-800-791-1919, Monday to Friday from 8:00 a.m. to 8:00 p.m. EST . For technical support outside Cana da and the U.S., call 00-1-450-491- 7444, Monday to Friday from 8:00 a.
An important point after buying a device Paradox Hellas S.A. EVO48 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Paradox Hellas S.A. EVO48 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Paradox Hellas S.A. EVO48 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Paradox Hellas S.A. EVO48 you will learn all the available features of the product, as well as information on its operation. The information that you get Paradox Hellas S.A. EVO48 will certainly help you make a decision on the purchase.
If you already are a holder of Paradox Hellas S.A. EVO48, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Paradox Hellas S.A. EVO48.
However, one of the most important roles played by the user manual is to help in solving problems with Paradox Hellas S.A. EVO48. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Paradox Hellas S.A. EVO48 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
