Instruction/ maintenance manual of the product PTR2E Panduit
Go to page of 24
Part No. PTR2E-MAN DURA-MARK ™ PTR2E Thermal Transfer Printer User’s Manual.
FOREWORD RETURN AUTHORIZATION Panduit Corp. 1819 Atlanta Highway Cumming, GA 30040 attn: Printer Repair Dept. Phone: 1-888-506-5400, ext. 7470 Fax: (770) 889-9264 COPYRIGHT NOTICE TRADEMARKS ii.
WARRANTY INFORMATION We Need To Hear From You! To Establish Your Warranty Period And Provide Access To Technical Support, Send Us Your Product Registration Card Today! CE iii.
FCC - DECLARATION OF CONFORMITY: INDUSTRY CANADA NOTICE: SHOCK HAZARD WARNING: MEDIA WARNING: RELOADING HINT: iv.
v TABLE OF CONTENTS.
vi.
1 Installation and Operation This section provides information on the instal- lation and operation of the printer. The printer is a low cost, desktop thermal bar code printer.
Unpacking Your Printer 2 PTR2E-MAN Rev.A Installation and Operation.
Getting To Know Your Printer PTR2E-MAN Rev.A 3 Installation and Operation.
Installation The following steps will guide you through the installation of the printer and media. Step 1 - Attach Power SHOCK HAZARD WARNING See page iv 4 PTR2E-MAN Rev.
Step 2 - Attach Interface Cable Parallel Interface Serial Interface PTR2E-MAN Rev.A 5 Installation and Operation.
Step 3 - Load Media 6 PTR2E-MAN Rev.A Installation and Operation Open Cover Open Print Head Open Guides Open Guides.
Step 3 - Load Media (cont.) PTR2E-MAN Rev. A 7 Installation and Operation Media O U T O U T O U T O U T O U T O U T O U T O U T Install Roll.
Step 3 - Load Media (cont.) 8 PTR2E-MAN Rev.A Installation and Operation Seat Media Roll Thread the Media.
Step 3 - Load Media (cont.) PTR2E-MAN Rev.A 9 Installation and Operation Close Guides.
Step 3 - Load Media (cont.) 10 PTR2E-MAN Rev. A Installation and Operation Close Cover.
Step 3 - Load Media (cont.) If the indicator fails to light, refer to Appendix A - Trouble Shooting. Run the AutoSense routine. PTR2E-MAN Rev. A 11 Installation and Operation Press FEED Button O Power.
Step 4 - AutoSense 12 PTR2E-MAN Rev.A Installation and Operation O O 2 UKQ1813 4.00 Serial port : 96,N,8,1 Image buffer size:245K Fmem:000,0K,019.9K avl Gmem:000K,0241K avl E I8,0,001 rY S8 D12 R032,0.
Feeding External Media PTR2E-MAN Rev.A 13 Installation and Operation Place Media In Rear Note: Media may be placed on PTR2-RS External Roll Stand Face Print Surface UP Insert & Load Media.
Thermal Transfer Ribbon Loading 14 PTR2E-MAN Rev.A Installation and Operation Thermal Transfer Print Head Mechanism Ribbon Path.
Thermal Transfer Ribbon Loading Open Print Head PTR2E-MAN Rev.A 15 Installation and Operation Load Ribbon Core Load Transfer Ribbon Start Ribbon Open Print Head (Rear View) Pull Ribbon Around Print He.
Appendix - Troubleshooting Problem Solution or Reason No printer driver installed for PTR2E. 1. If using PAN-MARK ™ Labeling Soft - ware, install directly from program. Oth - erwise, download driver from Panduit web site at www.panduit.com. POWER indicator does not light GREEN when power switch is turned to ON (1) position.
Printer Maintenance PTR2E-MAN Rev.A 17 Clean the Print Head Don’t Clean Rollers with Cleaning Pen.
Serial Interface Cable Wiring The figure below displays the cable wiring required to use the printer's RS-232 serial interface. 18 N/C RxD TxD DTR GND DSR RTS RI CTS P rinter Host 1 1 2 2 3 3 4 4.
An important point after buying a device Panduit PTR2E (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Panduit PTR2E yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Panduit PTR2E - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Panduit PTR2E you will learn all the available features of the product, as well as information on its operation. The information that you get Panduit PTR2E will certainly help you make a decision on the purchase.
If you already are a holder of Panduit PTR2E, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Panduit PTR2E.
However, one of the most important roles played by the user manual is to help in solving problems with Panduit PTR2E. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Panduit PTR2E along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
