Instruction/ maintenance manual of the product LS3E Panduit
Go to page of 30
P an-Quik ™ LS3E Printer Operator Manual English V er sion (Consult Factory f or Additional Languages) P anduit Corp. 1819 Atlanta Highway Cumming, GA 30040 USA Attention: Labeling Systems Department 1-888-506-5400, ext.
INDEX Introduction and Safety . . . . . . . . . . . . . . . . . . . . . . . .1 W arranty Information . . . . . . . . . . . . . . . . . . . . . . . . . .3 Printer Set-Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Battery Pack and Charging .
INTRODUCTION The LS3E P an-Quik ™ Hand-Held Printer is the complete printing solution for Electricians, Assemblers, Maintenance & Repair , Construction, and Network Communication Personnel.
DO NOT OPERA TE IN WET OR DAMP AREAS Do not operate the product in wet or damp ar eas. Operation of any electrical equipment in such an environment constitutes a definite safety hazard.
This unit includes EMI/RFI filters, however , it is possible that infrequent electrical phenomena may cause printer functions to be temporarily interrupted. This interruption can be corr ected by turning the printer “off,” and then back “on” again.
TECHNICAL SPECIFICA TIONS Dimensions: 4 1/4” W ide x 13 1/4” Long x 3 5/8” High W eight: 2.7 lb. Display: 2 line by 16 character LCD Keyboard: 49 color coded keys with er gonomically designed ke.
CONNECTING THE BA TTER Y CHARGER A battery charger has been included with your LS3E Printer . There is an input connector on the right hand side of the battery pack. Insert the charger plug into the connector and plug the battery charger into an outlet.
printer shuts down. The battery should then be rechar ged fully for 15 hours. When fully charged, the battery pack will measure 14-14.5 volts, and will power the printer all the way down to approximately 1 1 volts.
7 ➃ TO REMO VE LIFT HERE TEAR BAR RIBBON PRINT HEAD ➁ PUSH DOWN ① LOCA TE THE PRINT HEAD IN CENTER OF THE PRINTER WHEN LOADING BE SURE THA T THE RIBBON IS LOCA TED BETWEEN THE PRINT SHIELD AND THE PRINT HEAD . ➂ RO T A TE MANUAL AD V ANCE KNOB T O ALIGN WITH DRIVE PIN.
SECTION 1: Using the SETUP Menu Step 1: T urning the Printer On: Locate the POWER Key , represented by the symbol, found in the upper left hand corner of the keypad. Press and hold the POWER Key until the print head cycles. The LS3E will display the last label code in use.
9 W ARNING: When using heat shrink tubing, the liner must be cut or torn along the perforation by hand. T rying to use the tear bar to cut the heat shrink liner will not work, and may damage the tear bar . T o unload the labels, press and r elease the SHIFT Key and then press and r elease the FEED Key .
10 Step 5: Entering the Desired Legend: The printer features a 2 line by 16 character LCD display . If the legend that you desire is gr eater than 16 characters long or greater than 2 lines high then you will not be able to view the entire legend at one time.
11 QUIK-KEY TM OPTIONS OPTION QUIK-KEY TM CODE PRINT MODE EXAMPLE TEXT FONT K Standard * ABC Q Letter Quality @ ABC R Rotated TEXT SIZE V Compressed T ext ABC S Small T ext ABC N Normal T ext* ABC L L.
Printer Replacement Parts Part Number Description LS3-RIB Replacement Printer Ribbon LS3E-BP Replacement Battery Pack LS3E-MAN-A Replacement Operator Manual LS3EC-* Replacement Battery Charger Optional Accessories Part Number Description LS3E-CP Replacement Battery Charging Pack.
KEY DESCRIPTION CHAR T KEY / SYMBOL FUNCTION P O W E R T urns the printer on, SHIFT then POWER turns the printer off SETUP Activates the SETUP menu. CL R/ DEL DEL-removes the character above the curso.
Notes: The T erminal option can be used in conjunction with serialization (see page 14) and with rotated text. When continuous terminal block labels (labels with code ending with 00) are used, the printer will automatically select the T erminal option for the user .
PRINTING UNDERLINED AND NON-UNDERLINED LEGENDS IN THE SAME LABEL • Key in the portion of the legend that will not be underlined. Use the SP ACE Key to leave blanks where underlined characters will appear . • Press the SETUP Key . Select the Underlined option in the Other Options menu and exit the SETUP menu.
PRINTING UNDERLINED AND NON-UNDERLINED LEGENDS IN THE SAME LABEL • Key in the portion of the legend that will not be underlined. Use the SP ACE Key to leave blanks where underlined characters will appear . • Press the SETUP Key . Select the Underlined option in the Other Options menu and exit the SETUP menu.
Notes: The T erminal option can be used in conjunction with serialization (see page 14) and with rotated text. When continuous terminal block labels (labels with code ending with 00) are used, the printer will automatically select the T erminal option for the user .
KEY DESCRIPTION CHAR T KEY / SYMBOL FUNCTION P O W E R T urns the printer on, SHIFT then POWER turns the printer off SETUP Activates the SETUP menu. CL R/ DEL DEL-removes the character above the curso.
Printer Replacement Parts Part Number Description LS3-RIB Replacement Printer Ribbon LS3E-BP Replacement Battery Pack LS3E-MAN-A Replacement Operator Manual LS3EC-* Replacement Battery Charger Optional Accessories Part Number Description LS3E-CP Replacement Battery Charging Pack.
11 QUIK-KEY TM OPTIONS OPTION QUIK-KEY TM CODE PRINT MODE EXAMPLE TEXT FONT K Standard * ABC Q Letter Quality @ ABC R Rotated TEXT SIZE V Compressed T ext ABC S Small T ext ABC N Normal T ext* ABC L L.
10 Step 5: Entering the Desired Legend: The printer features a 2 line by 16 character LCD display . If the legend that you desire is gr eater than 16 characters long or greater than 2 lines high then you will not be able to view the entire legend at one time.
9 W ARNING: When using heat shrink tubing, the liner must be cut or torn along the perforation by hand. T rying to use the tear bar to cut the heat shrink liner will not work, and may damage the tear bar . T o unload the labels, press and r elease the SHIFT Key and then press and r elease the FEED Key .
SECTION 1: Using the SETUP Menu Step 1: T urning the Printer On: Locate the POWER Key , represented by the symbol, found in the upper left hand corner of the keypad. Press and hold the POWER Key until the print head cycles. The LS3E will display the last label code in use.
7 ➃ TO REMO VE LIFT HERE TEAR BAR RIBBON PRINT HEAD ➁ PUSH DOWN ① LOCA TE THE PRINT HEAD IN CENTER OF THE PRINTER WHEN LOADING BE SURE THA T THE RIBBON IS LOCA TED BETWEEN THE PRINT SHIELD AND THE PRINT HEAD . ➂ RO T A TE MANUAL AD V ANCE KNOB T O ALIGN WITH DRIVE PIN.
printer shuts down. The battery should then be rechar ged fully for 15 hours. When fully charged, the battery pack will measure 14-14.5 volts, and will power the printer all the way down to approximately 1 1 volts.
CONNECTING THE BA TTER Y CHARGER A battery charger has been included with your LS3E Printer . There is an input connector on the right hand side of the battery pack. Insert the charger plug into the connector and plug the battery charger into an outlet.
For your pr otection please complete and mail this card within ten (10) w orking days fr om the date of purchase. This will validate y our P anduit Corp.
NO POST AGE NECESSAR Y IF MAILED IN THE UNITED ST A TES BUSINESS REPL Y MAIL FIRST CLASS MAIL PERMIT NO . 4 CUMMING, GA POST A GE WILL BE P AID BY ADDRESSEE P ANDUIT CORP .
An important point after buying a device Panduit LS3E (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Panduit LS3E yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Panduit LS3E - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Panduit LS3E you will learn all the available features of the product, as well as information on its operation. The information that you get Panduit LS3E will certainly help you make a decision on the purchase.
If you already are a holder of Panduit LS3E, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Panduit LS3E.
However, one of the most important roles played by the user manual is to help in solving problems with Panduit LS3E. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Panduit LS3E along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
