Instruction/ maintenance manual of the product UB-7320 Panasonic
Go to page of 42
Electr onic Boar d Operating Instructions With Installation Manual (f or qualified ser vice per sonnel) Model No. UB-7320 Stand and W all-mounti ng kit are optional. English . . . . . . . . . . . . . . . . . 1–42 中 文 . . . . . . . . . . . . . . .
2 Thank y ou for purchasing the P anasonic Electronic Board. For optimum perf ormance and saf ety , plea se read these instructions caref ully . Model number: ___________ ______________ Date of purch .
3 English Operating Instructions For Your Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 • CD-ROM . . .
4 For Your Safety • (220–240 V equipment) A cer tified pow er supply cord has to be used with this equipment. Th e relev ant national insta llation and/or equipment re gulations shall be considered.
Precautions 5 English Operating Instructions Precautions Ne ver remo ve t he cov er , take apa r t or modify the product. This will v oid the warranty . Do not position the electronic boar d in a location where it is unstable. Do not pu t drinks, other liquids or heavy items on the tra y or scre en.
Precautions 6 ■ CD-R OM T o prev ent the CD-R OMs from accidental damages: Do not lean against th e screen or on the cov er (low er), e ven if the electro nic board is mounted on the wall. Hav e the unit installed, remo ved and disposed of only by qualified ser vice personnel.
Precautions 7 English Operating Instructions Installation • Do not install the unit where it ma y be expo sed to direct sunlight, near heating equipment, or near air-conditioning vent s as this ma y cause stretching and/or discoloration of the screen.
Part Names and Functions 8 P ar t Names and Functions (ON) (OFF) PUSH OPEN P U S H O P E N A C Inlet P ower Switc h Tr a y Po w e r C o r d Output P ort Printer Door Open this door to load copy paper or to remove jammed paper . (See pages 1 0, 13.) Door Open Button Push this button to op en the prin ter door .
Part Names and Functions 9 English Operating Instructions ■ Contr ol panel Pa n e l Name Description Contrast Indicator This lamp indicator displa ys t he pr inting contrast used during cop ying.
Loading Copy Paper 10 1 Set the power switch to on ( I ). • “ ” will flash on the Multi-Copy/Error Indicato r when copy paper has r un out. • The screen will mov e to home position and stop . 2 Push the door o pen button and op en the printer door .
Making Copies 11 Operating Instructions English This section describes how to copy te xt and illustrations dra wn on the screen. 1 Set the power switch to on ( I ). • “ ” will light on the Multi-Cop y/Error Indicator to in dicate that the unit is rea dy to cop y .
Using the Projector Screen 12 One of four screens of this electr onic board ca n also be used as the projector screen. The screen has no ruled lines so the projected image is easy to see. 1 Press or more than 2 seconds to mov e t he screen to the projecto r screen.
Paper Jams 13 Operating Instructions English T o release jammed paper: 1 Push the door o pen button and o pen the printer door . 2 Remov e the jammed paper by pulling the paper roll to the direction A. If the jam med paper is still in the cutter cov er , remove it using tweez ers from slot B.
Computer Interfacing 14 Drivers and softw are must be installed in y our computer to use Board I mage Capture, Quic k Image Navigat or , P anasonic-DMS, printer and TW AIN driver . ■ System requirements * 1 This electronic board does not fu nction with Hi-Speed USB 2.
Computer Interfacing 15 Operating Instructions English ■ Installing Drivers / Boar d Image Capture The USB, pr inter , TW AIN driver and Board Image Capture are installe d in your computer b y fo llowing procedures . Note • Do not y et connect a USB cable to the electronic bo ard.
Computer Interfacing 16 8 F ollow the on-screen inst r uctions if the wizard window s appear . • If the wizard window is displa yed to select the file (##.inf) for the printer driv er in Windows XP , se lect “windowsinfoem##.inf ”. • If the wizard windo w is display ed to connect to the Windo ws Update in Windows XP SP2, select [No].
Computer Interfacing 17 Operating Instructions English 2 In the Control P anel , doub le-click Add/ Remov e Programs (Windows XP: Add or Remov e Programs , Wind ows Vista: Uninst all a program ). 3 Select the s oftware you want to remov e, then remov e it.
Computer Interfacing 18 Note • Board Image Capture cann ot be star ted while the P anaboard Oper ation P anel is display ed using Quick I mage Navigator or P anasonic-DMS. T o star t Board Image Capture, clic k [Close] in the P anaboard Oper ation P anel window , then star t Board I mage Capture .
Computer Interfacing 19 Operating Instructions English ■ P anaboar d Operation Panel It is possible to per form the same operations as with the electronic board contr ol panel (page 9) from the follo wing P anaboard Ope ration b uttons.
Computer Interfacing 20 ■ Printing T o pr int do cuments from the computer to the pr inter , select th e Print m enu of the applic ation software and select the printer name set when installing. The standa rd printer name is “P anaboard-UB7 USB Pr inter (A4/L etter)*”.
Daily Care and Maintenance 21 Operating Instructions English Alwa ys turn off the po wer switch and unplug the power plug when c leaning outside and inside the unit. ■ Cleaning the screen and the un it Gently wipe the screen f ilm and unit with a water- dampened clo th that has been th oroughly wrung.
Daily Care and Maint enance 22 ■ Cleaning the printer hea d and paper feed r oller If bla ck streaks appear on the co py , clean the printer head and the pape r feed rolle r . 1 Push the door o pen button and op en the printer door . 2 Dampen the ti p of a cotton s wab in eth yl alcohol and gently wipe the printer head .
Troubleshooting 23 Operating Instructions English T reat problems according to the inf or mation giv en in the ta ble belo w . If problems still pe rsist, call y our dealer for service. T r oubleshooting Symptom Care and Remed y See Pag e P ower s witch is on but the indicator is off .
Troubleshooting 24 ■ Meanings of err or codes The f ollowing tab le describes the meaning of each of the symbols which ma y flash in the Multi-Cop y/Error Indicator .
Specifications 25 Operating Instructions English ■ Option and Separatel y av ailable * 1 Using a copy paper roll with a smaller core could caus e paper jam.
26.
27 Bef ore installing this set, please read this manual completely . CLASS 1 LED PR ODUCT W ARNING Ha ve the unit installed, remo v ed and disposed of only b y qualified ser vice personnel. Saf ety check m ust be done by qu alified ser vice personnel after installing this option.
28 Assembling the Electr onic Boar d ■ Accessories f or assembling The pac kage includes the par ts f or setting up the electronic boa rd shown belo w .
Assembling the Electronic Board 29 Installation Manual English ■ Assembl y 1 Assemble the optional sta nd or wall-mounting kit. ■ If y ou are using a stand, refer to page 34. ■ If y ou are using a wall-mounting kit, refer to page 38. 2 Remove the electr onic boar d from the shipping bo x.
Assembling the Electronic Board 30 3 Install the electr onic board. Install the electr onic board using the stand (option) or wall- mounting kit (option).
Assembling the Electronic Board 31 Installation Manual English 4 Attach the paper holder s. Install the paper holders t o the holes in numeric al order of the arrows (1), (2), (3) an d (4). [First install the paper ho lder (A), then install the paper h older (B) on top of (A).
32 Electr onic Boar d Operations Chec k After assemb ling the electronic bo ard, perf or m the procedures presente d in the follo wing table t o make sure it functions p roper ly . Step P oints t o Check Symptom Solutions 1 T ur n on the pow er switch.
33 Installation Manual English Repac king P erf or m Assemb ly Steps 2 through 5 on pages 29 - 31 in re v erse to repack th e electronic board and accessories. Use the join ts to fasten the shipping box. • Do not touch the scree n film surface , as this may damage it.
34 Assembling the Optional Stand (KX-B061) ■ Accessories The pac kage box f or the option al stand includes the par ts noted below; please confir m that all par ts are present bef ore beginning installat ion . * 1 The accessory wrench is required to f asten or loosen the s crews , ; please stor e it carefully for future use.
Assembling the Optional Stand (KX-B061) 35 Installation Manual English ■ Assembl y 1 Assembling the stand ■ Assembling the fall-pre vention extension legs The f all-pre vention e xtensi on legs increase the saf ety of the electronic board. • Install and al ways set the fall-prevention le gs when using the s tand.
Assembling the Optional Stand (KX-B061) 36 ■ Assembling the stand Note * 1 Do not tighten th e screw to o much. This may def or m the pipes. Assemble with the holes tow ard the front. Locking casters side (rear) Pull the f all-prev ention extension legs down (f all-prev ention e xtension legs will be fix ed by the lock pin.
Assembling the Optional Stand (KX-B061) 37 Installation Manual English 2 Attach the fixtures wi th the four wing-bolts. 3 Assemble and install the electr onic board.
38 Optional W all-mounting Kit (KX-B063) Bef ore attempting installatio n of this wall-mounting kit, we strongly recommend consul ting with the building man ager , engineer , or architect. The installe r needs to know t he type of construction used f or the wall intended f or this installation and the location of wall stu ds.
Optional Wall-mounting Kit (KX-B063) 39 Installation Manual English ■ W all-mounting pr ocedure 1 Confirm that the wall is str ong enough to suppor t the weight of the electronic boar d. The wall mu st be capable of suppor ting at least 2,010 N [205 k g f (452 lbs.
Optional Wall-moun ting Kit (KX-B063) 40 ■ Attaching the wall-mounting fixtures The electronic board m ust be mounted with the method most suited to the material of the wall. Three meth ods are presen ted here. (Other option s may be a vailab le in y our area.
Optional Wall-mounting Kit (KX-B063) 41 Installation Manual English ● Attaching to plasterboard walls Split-wing togg les (sold in stores) are needed.
42.
An important point after buying a device Panasonic UB-7320 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Panasonic UB-7320 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Panasonic UB-7320 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Panasonic UB-7320 you will learn all the available features of the product, as well as information on its operation. The information that you get Panasonic UB-7320 will certainly help you make a decision on the purchase.
If you already are a holder of Panasonic UB-7320, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Panasonic UB-7320.
However, one of the most important roles played by the user manual is to help in solving problems with Panasonic UB-7320. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Panasonic UB-7320 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
