Instruction/ maintenance manual of the product TZ-PCD3000 Panasonic
Go to page of 8
Digit al CA TV T erminal Operating Instructions Model No. TZ-PCD3000 For assist ance, please call : your local cable operator Before connecting, operating or adjusting this product, please read these instructions completely . Save this manual for future reference.
The Class ll insulation symbol(square within a square)indicates that this product has been evaluated and tested to comply with Class ll insulation requirements. W ARNING: T o prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or moisture.
Cables are available from your dealer or electronic supply house. Before you purchase any cables, be sure you know what type of output and input con- nectors your various components require.
For assistance, please call : your local cable operator Front and Rear V iew of the Digital CA TV T erminal 5 1 23 4 Dear Panasonic Customer Welcome to the Panasonic Family of customers. W e hope that you have many years of enjoyment from your new Digital CA TV T erminal.
5 12 3 4 Rear Panel 10 6 7 8 9 5 1 2 3 4 10 6 7 8 9 11 12 11 12 CABLE IN CABLE OUT DIGIT AL AUDIO COAX OUT AC Power Input AUDIO OUT VIDEO OUT S-VIDEO OUT DIGIT AL AUDIO OPT OUT IR BLASTER SERIAL port AC Switched Outlet Use to connect Cable Signal input from Cable Service Provider .
Digital CA TV T erminal connection to stereo TV and stereo VCR Follow this diagram when connecting the Digital CA TV T erminal to a stereo TV . Procedure 1 Connect S-VIDEO Cable from the S-VIDEO output jack on the Digital CA TV T erminal to the S-VIDEO input jack on the TV or VCR.
Digital CA TV T erminal connection to TV and VCR Follow this diagram when connecting the Digital CA TV T erminal to a TV and VCR. Procedure Note: Connect the CABLE OUT jack of the Digital CA TV T erminal to the ANT IN jack of the VCR, and connect the ANT OUT jack of the VCR to the ANT IN jack of the TV using 75 shielded cable.
T roubleshooting Check that the batteries are installed with the correct polarities (+and -). The batteries are depleted: Replace them with new ones. Point the remote control unit at the remote control sensor and operate. Operate the remote control unit at a distance of not more than 23 feet (7 meters) from the remote control sensor .
An important point after buying a device Panasonic TZ-PCD3000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Panasonic TZ-PCD3000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Panasonic TZ-PCD3000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Panasonic TZ-PCD3000 you will learn all the available features of the product, as well as information on its operation. The information that you get Panasonic TZ-PCD3000 will certainly help you make a decision on the purchase.
If you already are a holder of Panasonic TZ-PCD3000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Panasonic TZ-PCD3000.
However, one of the most important roles played by the user manual is to help in solving problems with Panasonic TZ-PCD3000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Panasonic TZ-PCD3000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
