Instruction/ maintenance manual of the product TQB2AA0775 Panasonic
Go to page of 50
Quick Start Guide (See page 6-14) Guía de inicio rápido (vea la página 6-14) TQB2AA0775 Operating Instructions 37” Class 1080p LCD HDTV (37.0 inches measured diagonally) Manual de instrucciones T elevision de alta definición de 1080p y clase 37” de LCD (37,0 pulgadas medidas diagonalmente) Model No.
2 SDHC Logo is a trademark. GalleryPlayer and the GalleryPlayer Logo are trademarks of GalleryPlayer , Inc. HDA VI Control™ HDA VI Control™ is a trademark of Matsushita Electric Industrial Co., Ltd. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
3 V iewing Advanced F AQs, etc. Quick Start Guide Manufactured under license from Dolby Laboratories. DOLBY and the double-D symbol are trademarks of Dolby Laboratories.
4 ANTENNA LEAD-IN WIRE ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) GROUNDING CONDUCTORS (NEC SECTION 810-21) GROUND CLAMPS POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, P ART H) ELECTRIC SERV.
5 19) An outside antenna system should not be lo cat ed in the vicinity of overhead power lines, other electric light, power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
6 Accessories/Optional Accessory Check you have all the items shown. Installing the remote’ s batteries Open Hook Note the correct polarity (+ or -). Close Caution Incorrect installation may cause battery leakage and corrosion, resulting in damage to the remote control.
7 Quick Start Guide Accessories/Optional Accessory A B A Preparation for W all-hanging Before mounting the TV on the wall, you must remove the TV -Stand from the TV . Follow the steps below: W ARNING Failure to use a Panasonic bracket or choosing to mount the unit yourself will be done at the risk of the consumer .
8 T o connect the antenna terminal and Cable Box ANT OUT ANT IN Cable In ANTENNA Cable In DIO Basic Connection Note All cables and external equipment shown in this book are not supplied with the TV . For the details of the external equipment’s connections, please refer to the operating manuals for the equipment.
9 Quick Start Guide Basic Connection (TV + DVD Recorder or VCR) (Antenna + TV) T o connect the antenna terminal and DVD recorder or VCR ANT OUT ANT IN Cable In COMPONENT IN 1 COMPONENT IN 2 R L Y P B P R R L VIDEO R L VIDEO IN 1 PROG OUT AUDIO S VIDEO ANTENNA Cable In Y R L Manufactured under license from Dolby Laboratories.
10 T o connect the antenna terminal and Satellite Receiver and DVD recorder or VCR ANT IN ANT OUT ANT IN Cable In COMPONENT IN 1 COMPONENT IN 2 R L Y P B P R R L VIDEO R L VIDEO IN 1 PROG OUT AUDIO S VIDEO ANTENNA Cable In Y R L Manufactured under license from Dolby Laboratories.
11 Quick Start Guide Basic Connection (A V cable connections) (TV + DVD Recorder or VCR + Satellite Receiver) High-Definition Standard-Definition Note Some programs contain a copyright protection signal to prevent recording. When the copyright protection program is displayed, do not connect the other TV monitor through a VCR.
12 - SUB MENU Identifying Controls Remote control sensor Within about 23 feet (7 meters) in front of the TV set. Power indicator (on: red, off: no light) Note The TV consumes a limited amount of power as long as the power cord is inserted into the wall outlet.
13 Quick Start Guide First T ime Setup Identifying Controls First T ime Setup “First time setup” is displayed only when the TV is turned on for the first time after the power cord is inserted into a wall outlet and when “Auto power on” (p. 24-25) is set to “No”.
14 ■ Press to exit from a menu screen Auto channel setup Select “Auto program” First time setup Language Clock Auto program next select Select “ANT in” Program channel Cable ANT in Auto set .
15 Quick Start Guide V iewing W atching TV First T ime Setup W atching TV Connect the TV to a cable box/cable, set-top-box, satellite box, or antenna cable (p. 8-1 1) T o watch TV and other functions Note Reselect “Cable” or “Antenna” in “ANT in” of “Program channel” to switch the signal reception between cable TV and antenna.
16 W atching TV (Continued) ■ Other Useful Functions (Operate after ) Listen with SAP (Secondary Audio Program) ■ Select Audio Mode for watching TV Digital mode Press SAP to select the next audio track (if available) when receiving a digital channel.
17 V iewing W atching TV ■ Set Favorite Feature 1 Display the SUB MENU. SUB MENU Setup SUB MENU Surf mode Set favorite Off CC Caption select Signal meter All 2 Setup SUB MENU Surf mode Set favorite .
18 V iewing from SD Card Y ou can view photos taken with a digital camera or digital video camera and saved on an SD card. (Media other than SD Cards may not be reproduced properly .
19 V iewing Viewing from SD Card T o change the view (slide show mode, adjusting images, etc.) ■ T o setup slide show mode In or 1 Display “Photo menu” 2 Select “Setup slide show” Photo menu Picture Setup slide show select “Setup slide show” ok 3 Select the item and adjust Setup slide show Disp.
20 W atching V ideos and DVDs If you have applicable equipment connected to the TV , you can watch videos and DVDs on the TV’ s screen. Input Select Y ou can select the external equipment to access.
21 V iewing W atching Videos and DVDs VIERA Link TM Setting If you connect equipment that has “HDA VI Control” function to a TV with HDMI cable, you can use more convenient functions. Please refer to p. 26-29. Before using these functions, you need to set “VIERA Link” setting to “On” as shown below .
22 Menu Item VIERA Link Record now Stop recording VIERA Link control Speaker output Picture Reset Picture mode Back light Picture, Brightness, Color , Tint, Sharpness Color temp.
23 Advanced How to Use Menu Functions (picture, sound quality , etc.) In A V mode, the Audio menu and Setup menu give fewer options. Adjustments/Configurations (alternatives) [Record now/Stop recording] Records programs on the recorder immediately with the TV’ s remote control (p.
24 Menu Item Setup SUB MENU Surf mode Set favorite CC Caption select Signal meter Menu Item Setup Surf mode Language Clock Program channel External devices Input labels VIERA Link setting VIERA Link P.
25 Advanced How to Use Menu Functions (picture, sound quality , etc.) Adjustments/Configurations (alternatives) Sets the mode to select the channel with Channel up/down button (All/Favorite/Digital Only/Analog only) Sets favorite channels. (p. 17) Displays Closed Caption.
26 VIERA Link TM “HDA VI Control TM ” Simultaneously control all Panasonic “HDA VI Control” equipped components using one button on one remote. VIERA Link TM is a new name for EZ Sync TM . Enjoy additional HDMI Inter-Operability with Panasonic products which have “HDA VI Control” function.
27 Advanced VIERA Link TM “HDA VI Control TM ” At the start of the DIGA, Player theater , or RAM theater playback, the TV’s input automatically switches to the input based on the playback equipment. For the RAM theater , the speakers automatically switch to the theater system.
28 VIERA Link TM “HDA VI Control TM ” Y ou can enjoy more convenient operation with the “HDA VI Control” function in the “VIERA Link” menu.
29 Advanced VIERA Link TM “HDA VI Control TM ” (Continued) Y ou can select Home theater or TV speakers for audio output. Control theater speakers with the TV’ s remote control. This function is available only when Panasonic Amplifier or Player theater is connected.
30 Lock Y ou can lock specified channels or shows to prevent children from watching objectionable content. ■ Press to exit from a menu screen Caution Make a note of your password in case you forget it. (If you have forgotten your password, consult your local dealer .
31 Advanced Lock ■ T o select the channel or the rating of the program to be locked Channel lock Select up to 7 (1-7) channels to be blocked. These channels will be blocked regardless of the program rating. Select “Mode” and set to “Custom” Select channel to lock.
32 Editing and Setting Channels The current channel settings can be changed according to your needs and reception conditions. ■ Press to exit from a menu screen Display menu Select “Setup” Menu .
33 Advanced Editing and Setting Channels Automatically searches and adds available channels to the memory . Select “ANT in” Select Cable or Antenna (p. 14) Select “Auto” Program channel Cable ANT in Auto Manual Signal meter next select Select a scanning mode (p.
34 Closed Caption CC Display Closed Caption The television includes a built-in decoder that is capable of providing a text display of the audio. The program being viewed must be transmitting Closed Caption (CC) information.
35 Advanced Input Labels Closed Caption Input Labels Input labels Display labels of external devices Devices connected to external input terminals can be labeled for easier identification during input selection.
36 Using T imer T urns Off automatically Sleep T urns On/Off automatically (5 timers can be set.) Timer 1 Timer 5 ~ The TV can automatically turn On/Of f at the designated date and time. The Clock must be set before On time/Off time settings. (p. 13) The “Sleep” timer and “On / Off timer” will not work if the “Auto power on” (p.
37 Advanced Recommended A V Connections Using T imer HDMI 1 HDMI 2 A V IN Cable In COMPONENT IN 1 COMPONENT IN 2 R L Y P B P R R L VIDEO R L VIDEO IN 1 PROG OUT AUDIO S VIDEO ANTENNA Cable In Y R L Manufactured under license from Dolby Laboratories. Fabriqué sous licence de Dolby Laboratories.
38 Cable In COMPONENT IN 1 COMPONENT IN 2 R L Y P B P R R L VIDEO R L VIDEO IN 1 PROG OUT AUDIO S VIDEO ANTENNA Cable In Y R L Manufactured under license from Dolby Laboratories. Fabriqué sous licence de Dolby Laboratories. Fabricado bajo licencia de Dolby Laboratories.
39 Advanced F AQs, etc. Ratings List for Lock Recommended A V Connections Ratings List for Lock “V -chip” technology enables you to lock channels or shows according to standard ratings set by the entertainment industry . (p. 31) ■ U.S. MOVIE RA TINGS (MP AA) NR NO RA TING (NOT RA TED) AND NA (NOT APPLICABLE) PROGRAMS.
40 T echnical Information Closed Caption (CC) For viewing the CC of digital broadcasting, set the aspect to FULL (If viewing with H-FILL, JUST , ZOOM, or 4:3; characters might be cut off).
41 F AQs, etc. T echnical Information Message Meaning Is SD card in? The card is not inserted. No file The card has no data or this type of data is not supported.
42 T echnical Information (Continued) VIERA Link TM “HDA VI Control TM ” HDMI connections to some Panasonic equipment allow you to interface automatically . (p. 26) This function may not work normally depending on the equipment condition. The equipment can be operated by other remote controls with this function on even if TV is in Standby mode.
43 F AQs, etc. Care and Cleaning T echnical Information Care and Cleaning First, unplug the Power cord plug from the wall outlet. Display panel The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning cloth or a soft, lint- free cloth.
44 - SUB MENU FA Q Before requesting service or assistance, please follow these simple guides to resolve the problem. If the problem still persists, please contact your local Panasonic dealer or Panasonic Service Center for assistance. For details (p.
45 F AQs, etc. Frequently Asked Questions Problem Actions Screen Sound Other If there is a problem with your TV , please refer to the table below to determine the symptoms, then carry out the suggested check.
46 Specifications 36.7 ” (931 mm) 4.3 ” (108 mm) 3.9 ” (97 mm) 1 1.7 ” (295 mm) 25.4 ” (644 mm) 16.0 ” (406 mm) 22.4 ” (568 mm) 23.8 ” (602 mm) Note Design and Specifications are subject to change without notice. Mass and Dimensions shown are approximate.
47 F AQs, etc. Limited W arranty (for U.S.A.) Specifications Limited W arranty Coverage If your product does not work properly because of a defect in materials or workmanship, Panasonic Consumer Electronics Company or Panasonic Puerto Rico, Inc.
48 Customer Services Directory (for U.S.A.) Customer Services Directory Obtain Product Information and Operating Assistance; locate your nearest Dealer or Service Center; purchase Parts and Accessories; or make Customer Service and Literature requests by visiting our Web Site at: http://www .
49 F AQs, etc. Limited W arranty (for Canada) Customer Services Directory (for U.S.A.) Limited W arranty (for Canada) Panasonic Canada Inc. P ANASONIC PRODUCT - LIMITED W ARRANTY Panasonic Canada Inc.
Customer ’ s Record The model number and serial number of this product can be found on its back cover . Y ou should note this serial number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid in identification in the event of theft or loss, and for W arranty Service purposes.
An important point after buying a device Panasonic TQB2AA0775 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Panasonic TQB2AA0775 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Panasonic TQB2AA0775 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Panasonic TQB2AA0775 you will learn all the available features of the product, as well as information on its operation. The information that you get Panasonic TQB2AA0775 will certainly help you make a decision on the purchase.
If you already are a holder of Panasonic TQB2AA0775, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Panasonic TQB2AA0775.
However, one of the most important roles played by the user manual is to help in solving problems with Panasonic TQB2AA0775. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Panasonic TQB2AA0775 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
