Instruction/ maintenance manual of the product TH-P54Z10H Panasonic
Go to page of 64
Operating Instructions Plasma T elevision Model No. TH-P54Z10H Thank you for purchasing this Panasonic product. Please read these instructions before operating your set and retain them for future reference. The images shown in this manual are for illustrative purposes only .
This TV consists of the following units: TH-P54Z10H (Plasma T elevision) TH-P54Z1HM (Display Unit) TU-Z100HR (T uner Box) SP-54Z1A (Speaker) 2 T urn your own living room into a movie theatre! Experien.
Basic Advanced T echnical Quick Start Guide 3 media excitement Contents Be Sure to Read Safety Precautions ······································· 4 (W arning / .
4 Safety Precautions W arning Handling the mains plug and lead Insert the mains plug fully into the socket outlet. If the mains plug is loose, it could generate heat and cause fire. Ensure that the mains plug is easily accessible. Ensure the earth pin on the mains plug is securely connected to prevent electrical shock.
5 Caution This appliance is intended for use in tropical climates When cleaning the TV , remove the mains plug Cleaning an energized TV may cause electrical shock.
6 Maintenance Options First, remove the mains plug from the socket outlet. Display panel Regular care: Gently wipe the surface clean of dirt by using a soft cloth. Major contamination: Wipe the surface clean using a soft cloth dampened with clean water or diluted neutral detergent (1 part detergent to 100 parts water).
Maintenance / Options Accessories Quick Start Guide 7 Accessories Pedestal TBLX0107 p. 8 Pedestal installation kit TXFBL01JUUJ p. 8 □ ● □ ● (2) (4) (4) Speaker (2) SP-54Z1A p.
8 Accessories Installing remote’ s batteries 1 Pull open Hook 2 Note the correct polarity (+ or -) Close Caution Incorrect installation may cause battery leakage and corrosion, resulting in damage to the remote control. Do not mix old and new batteries.
Accessories Quick Start Guide 9 Assembling the pedestal Remove the cable cover from the frame . The cable cover will be used again after the pedestal is attached to the display unit. ● B Cable cover Use the assembly screws to fasten securely . Make sure that the screws are securely tightened.
10 Accessories Attaching the Speakers Speaker Speaker (2) Speaker installation kit Mounting bracket-[T op] (2) TXFKR04DLUJ ● Mounting bracket-[Lower right] TXFKR02JXUE ● Mounting bracket-[Lower le.
Accessories Quick Start Guide 11 Use another two assembly screws - to fasten the speaker to the mounting brackets . C A B E- - b Adjust the speaker position and make sure that the assembly screws - are securely tightened. E b 5 Connect the speaker and the display unit with the speaker cable .
12 Connecting the Display Unit and the T uner Box Please ensure that the display unit and the tuner box are disconnected from the mains sockets before attaching or disconnecting any leads. If you are going to place the tuner box close to the display unit, it is recommended to connect them using supplied HDMI cable.
Basic Connection Quick Start Guide 13 Connecting the T uner Box and DVD Recorder / VCR RF OUT RF IN AUDIO OUT VIDEO OUT RF cable RF cable DVD Recorder or VCR Rear of the T uner Box T errestrial aerial Mains lead AC 220 - 240 V 50 / 60 Hz RCA cable Note Do not put the RF cable close to the mains lead to avoid noise.
14 Identifying Controls Display Unit T uner Box Remote control signal receiver Do not place any objects between the TV remote control signal receiver and remote control. ● Function select V olume / Contrast / Brightness / Colour / Sharpness / T int (NTSC mode) / Bass / T reble / Balance / Auto T uning (p.
Identifying Controls Quick Start Guide ヵヷ モヷ 15 Remote control Cursor buttons Makes selections and adjustments ● Standby On / Off switch Switches TV On or Of f standby ● Sound Mute Switches sound mute On or Off ● Aspect (p.
ヵヷ モヷ 16 Auto T uning Search and store TV channels automatically . These steps are not necessary if the setup has been completed by your local dealer . Please complete preparations and setup of all units before starting Auto T uning. (p. 8 - 13) Please complete connections (p.
Auto T uning Quick Start Guide Using the On-Screen Displays 17 Many features available on this TV can be accessed via the On-Screen Display menu. ON SCREEN HELP Instructions box (example: Sound Menu) .
ヵヷ モヷ ヵヷ 18 W atching TV 1 T urn power on POWER Mains power On / Off switch of the display unit should be On. (p. 14) ● 2 Select Digital TV or Analogue TV mode TV 1 BBS CH05 5.5MHz Coronation Street Information banner appears whenever you select a channel For details p.
W atching TV Basic T o confirm another tuned channel name ● T o watch the channel listed in the banner ● T o select a favourite list (Digital TV mode) ● B T o hide ● EXIT Information on the next programme (Digital TV mode) ● T o set display timeout “Banner Display T imeout” (p.
Display the selectable settings for the current programme Change aspect ratio A SPECT Change the aspect ratio Enjoy viewing the picture at its optimum size and aspect.
W atching TV Basic W atch TV ,DVD, etc. in multiwindow 21 Other useful functions View in multi window PIP Enjoy viewing two images at once, such as a TV programme and a DVD.
ヵヷ モヷ ヵヷ 22 V iewing T eletext Y ou can enjoy timely news, weather forecasts, stock market and other various information in digital teletext services provided by broadcasters. When the teletext service is available, a bar appears on the screen indicating how to start the service.
Viewing T eletext Basic 23 T o change mode “T eletext” in Setup Menu (p. 31) What is F ASTEXT mode? In F ASTEXT mode, four differently coloured subjects are situated at the bottom of the screen. T o access more information about one of these subjects, press the appropriately coloured button.
24 V iewing T eletext FULL / T OP / BOTTOM Using teletext conveniently Store frequently viewed pages View sub page W atch TV while waiting for update Store frequently viewed pages in the colour bar (List mode only) Corresponding colour button (As page is displayed) press and hold The number changes to white.
Viewing T eletext Using TV Guide (Digital TV mode) Basic ヵヷ モヷ 25 Using TV Guide (Digital TV mode) V iew TV Guide Each time pressed, the layout will be changed.
ヵヷ モヷ ヵヷ モヷ 1 Display the input selection menu AV 2 Select the input mode of the connected equipment Input Selection AV1 AV2 AV3 AV4 PC HDMI1 HDMI2 TV HDMI3 HDMI4 select watch Y ou can also select the input using the A V button on the remote control or the front of the tuner box.
W atching Videos and DVDs Basic 27 BD/DVD / TV switch ∗ Switch to BD/DVD to operate Panasonic DVD Recorder , DVD Player , Player theatre, Blu-ray Disc theatre or VCR Radio frequency function (p. 15) is not available when you select “BD/DVD”. Point the remote control at the connected equipment to operate.
Choose from among alternatives T o reset the settings T o reset the picture settings only “Reset to Defaults” in Picture Menu (p. 30) T o reset the sound settings only “Reset to Defaults” in Sound Menu (p. 30) T o reset all settings “Shipping Condition” (p.
How to Use Menu Functions (Picture, sound quality , etc.) Advanced Main Menu Picture Sound Setup Setup Menu VIERA Link Settings Display Settings System Menu Child Lock Off Timer Other Settings Digital TV Tuning Menu Language Access Access Access Off Access Analogue TV Tuning Menu Access Access Access Access (p.
30 How to Use Menu Functions Menu Item Adjustments / Configurations (alternatives) Picture Viewing Mode Basic picture mode (Dynamic / Normal / Cinema / THX / Game) Dynamic : Provides enhanced picture .
How to Use Menu Functions (Picture, sound quality , etc.) Advanced 31 Menu Item Adjustments / Configurations (alternatives) Setup Off Timer Sets the time the TV automatically turns Of f (Off / 15 / 30 / 45 / 60 / 75 / 90 minutes) (p. 19) Child Lock Locks a channel / A V input to prevent access to it (p.
32 ヵヷ モヷ Input Labels 1 Display the menu MENU 2 Select “Setup” Main Menu Picture Sound Setup access select 3 Select “Display Settings” Setup Menu VIERA Link Settings Display Settings S.
Input Labels Digital TV Settings (Digital TV mode) 33 Advanced ヵヷ モヷ ヵヷ Digital TV Settings (Digital TV mode) 1 If in Analogue TV mode Select Digital TV mode TV 2 Display the menu MENU 3 S.
34 ヵヷ モヷ ヵヷ Editing Channels Y ou can make your favourite channel lists, skip unwanted channels, etc. T o return to TV EXIT 1 Select Digital TV or Analogue TV TV 2 Display the menu MENU 3 .
Editing Channels 35 Advanced List favourite channels (Digital TV mode) Favourites Edit Skip unwanted channels / Edit channels (Change name, Move) Channel List Y ou can hide unwanted channels. The hidden channels cannot be displayed except in this function.
36 ヵヷ モヷ ヵヷ T uning Channels 1 Select Digital TV or Analogue TV TV 2 Display the menu MENU 3 Select “Setup” Main Menu Picture Sound Setup access select 4 Select “Digital TV T uning M.
T uning Channels 37 Advanced Set Digital TV channel manually Digital TV Manual T uning Set Analogue TV channel manually Analogue TV Manual T uning Fine T uning Use to make small adjustments to the tuning of an individual channel (affected by weather conditions, etc.
38 ヵヷ モヷ Control Channel Audience 1 Display the menu MENU 2 Select “Setup” Main Menu Picture Sound Setup access select 3 Select “Child Lock” Setup Menu VIERA Link Settings Display Sett.
Control Channel Audience Restore Settings (Shipping Condition) 39 Advanced ヵヷ モヷ Restore Settings (Shipping Condition) 1 Display the menu MENU 2 Select “Setup” Main Menu Picture Sound Setu.
40 Menu Item Adjustments / Configurations (options) Picture Advanced Settings W/B High R White balance of bright red area and repeatedly adjusted W/B High B White balance of bright blue area W/B Low R White balance of dark red area W/B Low B White balance of dark blue area Gamma (S Curve / 2.
Displaying PC Screen on TV Pairing Remote Control 41 Advanced ヵヷ モヷ 1 Display “Remote Pairing” menu Press the button on the tuner box repeatedly until “Remote Pairing” menu is displayed. ● 2 Select “Y es” Remote Pairing No Yes 3 Register the remote control Press and buttons simultaneously at least 3 seconds.
42 ヵヷ モヷ V iewing from SD Card (VIERA IMAGE VIEWER) Photo View: Still images recorded by digital cameras will be displayed. Movie View: Moving pictures recorded by digital video cameras will be played back. During the operation, no signals are output from any of the A V terminals.
Viewing from SD Card (VIERA IMAGE VIEWER) 43 Advanced Slideshow Start Slideshow (operate in step ) Select the photo for the first view Start Slideshow T o pause T o return to Single view G ● ● R Note Slideshow is done within the thumbnail.
44 ヵヷ モヷ 1 Inse rt the SD Card 2 Select “Movie V iew” SD Card Photo View Movie View access select 3 Select the file to be viewed Title Date & Time Scene Duration Japan 00h03m01s Movie .
Viewing from SD Card (VIERA IMAGE VIEWER) 45 Advanced Y ou can enjoy the multi-channel sound via an amplifier connected to DIGIT AL AUDIO OUT terminal.
46 Enjoy additional HDMI interoperability with Panasonic products which have “HDA VI Control” function. This TV supports “HDA VI Control 4” function. Connections to the equipment (DIGA Recorder , HD Video Camera, Player theatre, Amplifier , etc.
VIERA Link “HDA VI Control TM ” 47 Advanced Note This function may not work properly depending on the connected equipment. For DIGA Recorder / DVD Player / Blu-ray Disc Player / HD Video Camera / LUMIX Camera with VIERA Link function, connect to HDMI1, HDMI2, HDMI3 or HDMI4 terminal via an HDMI cable.
48 VIERA Link “ Control TM ” Features available (Using VIERA Link Menu) Direct TV Recording - What you see is What you record Direct TV Rec Recording the current programme in DIGA Recorder immediately .
VIERA Link “HDA VI Control TM ” Advanced 49 Features available (Using VIERA Link Menu) Y ou can control some functions of the connected equipment with this TV remote control by pointing at the TV's signal receiver . If you cannot operate, check the settings and the equipment “VIERA Link features and connections” (p.
50 Features available (Using VIERA Link Menu) Speaker control Speaker Selection VIERA Link “ Control TM ” Y ou can control the theatre speaker with this TV remote control by pointing at the TV's signal receiver . If you cannot operate, check the settings and the equipment “VIERA Link features and connections” (p.
VIERA Link “HDA VI Control TM ” VIERA T ools Advanced ヵヷ モヷ 51 VIERA T ools With VIERA T ools, you can directly access to some of the useful functions of connected equipment or SD card. 1 Display VIERA T ools Menu 2 Select a feature access select 3 Follow the operation of each feature VIERA Link Control VIERA Link Control (p.
52 T ypes of connectable equipment to each terminal T erminal Recording / Playback (equipment) A V1 IN P B / C B P B / C B COMPONENT Y R L AUDIO VIDEO A V2 IN P B / C B P B / C B COMPONENT Y R L AUDIO.
External Equipment Advanced 53 DIGIT AL AUDIO OUT 1234 Amplifier with speaker system T o listen with speakers or Optical digital audio cable RCA cable S VIDEO 4 pin terminal Chrominance in Chrominance.
54 T echnical Information Channel Allocation (Analogue TV mode) Channel Plan Asia / W . Europe CIS / E.Europe China Hong Kong NZ / Indonesia Indian CA TV South Africa American System American CA TV Ja.
T echnical Information T echnical 55 Updating the software system (Digital TV mode) Update system software to ensure that you have latest version software. If there is an update available, a notification banner is displayed when the channel has the update information.
56 T echnical Information SD Card Cautions in handling SD Card Do not remove the card while the TV is accessing data (this can damage card or TV). Do not touch the pins on the back of the card. Do not subject the card to a high pressure or impact. Insert the card in the correct direction (otherwise, card may be damaged).
T echnical Information T echnical 57 Input signal that can be displayed COMPONENT (Y , P B /C B , P R /C R ) , HDMI ∗ Mark: Applicable input signal Signal name COMPONENT HDMI 525 (480) / 60i ∗∗ .
58 Before requesting service or assistance, please follow these simple guides to resolve the problem. If the problem still persists, please contact your local Panasonic dealer for assistance. White spots or shadow images (noise) Check the position, direction, and connection of the aerial.
Frequently Asked Questions T echnical 59 Problem Actions Chaotic image, noisy Set “P-NR” in the Picture Menu (to remove noise). (p. 30) Check nearby electrical products (car , motorcycle, fluorescent lamp). ● ● No image can be displayed Is “Colour” or “Contrast” in the Picture Menu set to the minimum? (p.
60 F AQs Due to the digital reception technologies involved, quality of the Digital TV signals may be relatively low in some cases, despite good reception of Analogue TV channels. ● Unable to receive signals with a high-performance aerial • Install an aerial individually for the TV and VCR (or use a splitter).
Frequently Asked Questions Specifications T echnical 61 Specifications Power Source AC 220-240 V , 50 / 60 Hz Power Consumption A verage use Display Unit: 445 W / T uner Box: 40 W Standby condition Display Unit: 0.
62 Licence VGA is a trademark of International Business Machines Corporation. S-VGA is a registered trademark of the Video Electronics Standard Association. SDHC Logo is a trademark. HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
Licence T echnical 63 MEMO th_p54z10h_Eng_qbc2506.indb 63 th_p54z10h_Eng_qbc2506.indb 63 2009/07/13 11:05:21 2009/07/13 11:05:21.
Customer ’ s Record The model number and serial number of this product may be found on its rear panel. Y ou should note this serial number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid in identification in the event of theft or loss, and for W arranty Service purposes.
An important point after buying a device Panasonic TH-P54Z10H (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Panasonic TH-P54Z10H yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Panasonic TH-P54Z10H - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Panasonic TH-P54Z10H you will learn all the available features of the product, as well as information on its operation. The information that you get Panasonic TH-P54Z10H will certainly help you make a decision on the purchase.
If you already are a holder of Panasonic TH-P54Z10H, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Panasonic TH-P54Z10H.
However, one of the most important roles played by the user manual is to help in solving problems with Panasonic TH-P54Z10H. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Panasonic TH-P54Z10H along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
