Instruction/ maintenance manual of the product RC-CD300 Panasonic
Go to page of 8
1 Before connecting, operating or adjusting this product, please read these instructions completely. Please keep this manual for future reference. CD Clock Radio Operating Instructions Model No.
Concer ning Compact Discs Only compact discs bearing this mark can be used with this unit. However, continued use of irregularly shaped CDs can damage the unit. If the surface is dirty Wipe it with a damp cloth and then wipe dry. Wipe from the center toward the outer circumference.
Reset the clock regularly to maintain accuracy. (Monthly accuracy +/-30 seconds) This is a 12-hour clock. This example shows how to set the clock for 10:30 A.M. 1 Press and hold [DISP/-TIME SET] until the time display flashes. 2 Press [ i , 5 / 9 ] or [ j , : / 6 ] to adjust the time.
Other play methods Preparation for skip play and random play 1. Press [ 1 / ; , CD] . 2. Press [ ∫ , OFF] to stop play. “CD” must be displayed on the dis- play for these methods to work. The CD section is turned off if it is stopped for about 10 minutes.
Press [FM/AM, RADIO] to select the band. Each time [FM/AM, RADIO] is pressed FM ) AM ^----------n Turn the dial to tune to the desired station. “” lights up when the station is tuned in. Adjust the volume. ª To turn off Press [ ∫ , OFF] . To improve reception ª If noise is excessive in the FM stereo mode Press [MODE].
6 CD Press [ 1 / ; , CD] to start play. Press [ i , 5 / 9 ] or [ j , : / 6 ] to select the desired track. Press and hold [AL 1/-SET] until the display flashes. Press [ i , 5 / 9 ] or [ j , : / 6 ] to adjust the alarm time. 2 [ i , 5 / 9 ] : Increases the time by one-minute units.
7 Troubleshooting guide Before requesting service, make the below checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, In the U.S.A., contact the Panasonic Customer Call Center at 1-800-211-7262, or e-mail consumerproducts@panasonic.
1. Damage requiring service — The unit should be serviced by qualified service personnel if: 1. (a) The AC power supply cord or AC adaptor has been damaged; or 1. (b) Objects or liquids have gotten into the unit; or 1. (c) The unit has been exposed to rain; or 1.
An important point after buying a device Panasonic RC-CD300 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Panasonic RC-CD300 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Panasonic RC-CD300 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Panasonic RC-CD300 you will learn all the available features of the product, as well as information on its operation. The information that you get Panasonic RC-CD300 will certainly help you make a decision on the purchase.
If you already are a holder of Panasonic RC-CD300, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Panasonic RC-CD300.
However, one of the most important roles played by the user manual is to help in solving problems with Panasonic RC-CD300. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Panasonic RC-CD300 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
