Instruction/ maintenance manual of the product PT-FW300 Panasonic
Go to page of 11
< 1 > S PEC F ILE Product Number : PT - FW300 Product Name : LCD Projector As of November 2008. Appearance and specifications are subject to change without notice.
S PEC F ILE PT - FW300 LCD Projector As of November 2008 < 2 > Specifications Power supply Power consumption Optical system LCD panel Panel size Display method Drive method Pixels Pixel configur.
S PEC F ILE PT - FW300 LCD Projector As of November 2008 < 3 > VIDEO IN S-VIDEO IN COMPUTER AUDIO IN 1 COMPUTER AUDIO IN 2 AUDIO IN V ARIABLE AUDIO OUT SERIAL REMOTE LAN Power cord length Cabine.
S PEC F ILE PT - FW300 LCD Projector As of November 2008 < 4 > Dimensions 323 53 213 432 115 13.5 128.5 311 74 85 (12-23/32˝) (2-3/32˝) (8-3/8˝) (17˝) (4-17/32˝) (17/32˝) (5-1/16˝) (12-1/4˝) (2-29/32˝) (3-11/32˝) unit : mm (inch) NOTE: This illustration is not drawn to scale.
S PEC F ILE PT - FW300 LCD Projector As of November 2008 < 5 > Projection distance (scr een aspect ratio 16:10) Projected image Lower edge of projected image Upper edge of projected image L L L .
S PEC F ILE PT - FW300 LCD Projector As of November 2008 < 6 > Shift range Optical axis shift function allows to shift the position of a projected image as shown below .
S PEC F ILE PT - FW300 LCD Projector As of November 2008 < 7 > Computer data compatibility This projector accepts up to 91 kHz horizontal scanning fr equency and 162 MHz dot clock. NOTE: Pixel thinning is applied to signals that exceed a dot clock frequency of 150 MHz.
S PEC F ILE PT - FW300 LCD Projector As of November 2008 < 8 > STX ETX C1 C2 C3 : P1 P2 P3 P4 Start (1 byte) End (1 byte) Colon (1 byte) Parameter (1-4 bytes) Command (3 bytes) (Control and/or query commands) Serial connector The serial connector complies with RS-232C.
S PEC F ILE PT - FW300 LCD Projector As of November 2008 < 9 > Control commands * 1 Do not s end PON, POF, or O S H command s continuou s ly in a s hort period of time.
S PEC F ILE PT - FW300 LCD Projector As of November 2008 < 10 > Parameter format Parameter format S ize (Byte) Definition <pl> <off on> <input s ignal> <in s tallation> &.
S PEC F ILE PT - FW300 LCD Projector As of November 2008 < 11 > Notes on Projector Placement and Operation The projector uses a high-wattage lamp that becomes very hot during operation. Please observe the following precautions. 1. Never place objects on top of the projector while it is operating.
An important point after buying a device Panasonic PT-FW300 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Panasonic PT-FW300 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Panasonic PT-FW300 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Panasonic PT-FW300 you will learn all the available features of the product, as well as information on its operation. The information that you get Panasonic PT-FW300 will certainly help you make a decision on the purchase.
If you already are a holder of Panasonic PT-FW300, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Panasonic PT-FW300.
However, one of the most important roles played by the user manual is to help in solving problems with Panasonic PT-FW300. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Panasonic PT-FW300 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
