Instruction/ maintenance manual of the product PT-F200NTE/PT-FW100NTE Panasonic
Go to page of 49
Network Function Edition (PT -F200NTE/PT -FW100NTE) (PT -F200NTU/PT -FW100NTU) (PT -F200NTEA/PT -FW100NTEA) TQBH0186-2 (E/U/EA) M0707-1 127 Macintosh.
2 Contents Connecting with Wired LAN ……………………… 16 Selecting the connection method ………………… 17 Software Licensing Agreement …………………… 3 Notes on Using Wireless Connection …………… 4 Request Regarding Security ……………………… 6 What you can do with Wireless Manager mobile edition 4.
3 Please note the following. • Panasonic cannot be held liable for any direct or indirect damages resulting from the use or malfunction of this projector . • Panasonic cannot be held liable for damages arising from data corruption or loss as a result of using this projector .
4 Wireless connection function of the projector uses radio waves in the 2.4 GHz band. A radio station license is not required, but be sure to read and fully understand the following items before use. Do not use near other wireless equipment. The following equipment may use radio waves in the same band as the projector .
5 Notes on Using Wireless Connection (cont.) Channels that can be used The channels (frequency range) that can be used differ according to the country or region.
6 Request Regarding Security When using this product, be sure to implement sufficient security measures as security breaches of the type described below are conceivable.
7 What you can do with Wireless Manager mobile edition 4.5 Network T ransmission Y ou can connect the projector to a computer via the wireless LAN or the wired LAN, and send moving and still images. Refer to page 1 1 for details on how to connect. <Live mode> (See page 22) Used for normal presentations.
8 Check your computer • First, check your computer to see whether or not it has a wired LAN or a built-in wireless LAN ※ function. ※ LAN : “Glossary” (See page 44) • Before connecting the projector to the computer , be sure to check the following settings.
9 Software Installation The computer must meet the following requirements in order to use the supplied software. OS: Mac OS X v10.4 Mac OS X v10.5 ※ CPU: 800 MHz PowerPC G4 or faster , or 1.
10 Set the provided CD-ROM into the CD/DVD-ROM drive. Contents on Provided CD-ROM • Quit all running programs. Otherwise, installation may not be possible. • [Admin (administrator)] authority is required for installation. This software is used to send screen images from a computer to the projector via a wireless LAN or a wired LAN.
11 Connecting with wireless LAN 1 Click the install target or [ ] in the Dock. Detailed settings Select the projector to connect from the computer . • For details on how to connect, refer to page 17. • Only the built-in adapter appears on the <Network Adapter Selection> window .
12 The projectors that can be connected are displayed on the <Select Access Port> window . ヂ Network When you specify the network number (See page 29) set on the projector from one of [1], [2], [3], [4], and [U (USER)] ※ 1 , projectors that are presently switched on in the selected network number are displayed in [Projector Name].
13 2 In [Network], select the same network number as is displayed in the [WIRELESS LAN] menu of the projector to connect. Projectors powered on in the chosen network group are listed. 3 Select the desired projectors, and click [OK]. [ ] appears in the menu bar and a connection is established with the projector .
14 Connecting with wireless LAN (cont.) Connection error messages If a wireless LAN connection cannot be established, click the [ ] button in the bottom left of the <Select Access Port> window to display information on resolving the issue as shown below .
15 Y ou can make the setting for infrastructure mode ※ (connection through the access point ※ ); however , confirm to your system administrator on network settings before changing any settings. ※ “Glossary” (See pages 44 - 45) ヂ Projector settings 1 T urn on the projector and press the [NETWORK] button on the remote control.
16 Connecting with Wired LAN Connection can be made with wired LAN. However , confirm to your system administrator on network settings before changing any settings. ヂ Projector settings 1 T urn on the projector and press the [NETWORK] button on the remote control.
17 Selecting the connection method When the <Network Adapter Selection> window appears, select [Wireless LAN] or [Wired LAN] and click [OK]. [Wireless LAN]: The wireless adapter is used for the connection. [Wired LAN]: The wired LAN is used for the connection.
18 Other operations for connection ※ “Glossary” (See page 44) The newly registered connection is added to the connection list in the window shown in step 1. Click [ADD] and enter the IP address ※ (including its periods) of the connection to be added, and then click [REGISTER].
19 Other operations for connection (cont.) Even if there are two or more projectors with the same name, an ID ([Proj] + 4-digit number) is assigned to each projector to enable the projectors to be identified.
20 Click [ ] in the menu bar , followed by [Quit Wireless Manager]. The following window appears. 1 Click [Y es]. The computer returns to the original network settings when the connection is ended. However , note that some time may be needed to return to the original network settings.
21 Operations are performed from the menu. • Clicking [ ] in the menu bar displays the menu. Menu description V arious projection methods Status Menu Status indication Status : Indicate the connecting status.
22 V arious projection methods (cont.) Check the status indication in the menu bar to make sure that transmission is possible (check that the green lamp is lit). 1 Click [Live Mode] from the menu. The current computer screen is transmitted to the selected projector .
23 Useful Functions Blanks the screen for a moment. Click [Shutter function] from the menu. The image is turned off. 1 Click [Shutter function] from the menu again. The image comes back. 2 Shutter function The shutter function is available in the live mode.
24 Y ou can make various settings related to Wireless Manager ME 4.5. Setting options Setting option window Click [OPTION...] from the menu. The <Option> window shown to the right appears. 1 Click the desired tab to be set. 2 Click [OK]. 3 Resolution Select the quality of the image transmitted from the computer to the projector .
25 Y ou can set shortcut key combinations that let you control the Wireless Manager ME 4.5 functions by computer keyboard operations. Key setting Select the mode or the function to be set for the shortcut key , and click it. 1 Click one from [Cmd], [Alt], [Ctrl], and [Shift].
26 Setting options (cont.) • If the [Make an automatic connection] box is checked and a projector is registered as a destination for automatic connection when Wireless Manager ME 4.5 is started, <Select Access Port> window does not appear and connection is performed automatically .
27 Network setting of the projector When making a connection between a computer and a projector with settings other than the default settings, perform the procedure below to display the menu required when changing the initial settings. Select [NETWORK] with the [ Ÿź ] buttons.
28 Y ou can make detailed wired LAN settings. Select [WIRED LAN] at the network menu and click the [ENTER] button. DHCP ※ : ON : If a DHCP server exists in the network to which the projector is connected, the IP address will automatically be acquired.
29 Select [WIRELESS LAN] at the network menu. 1 Select the number to be connected with the [ ] buttons. 2 PT -FW100NT RETURN SELECT ENTER LANGUAGE OPTION SECURITY NETWORK POSITION PICTURE USER1 OFF ON.
30 Network setting of the projector (cont.) Select [NEXT] on the IP address setting window to switch to the wireless setting window . Make the settings related to the wireless connection between the projector and the network.
31 Network setting of the projector (cont.) Additionally perform the following setting using the [AUTHENTICA TION] setting. When setting [OPEN] or [SHARED] as authentication and setting [WEP ※ ] as the encryption method: DEF AUL T KEY : Set 1 – 4 numerals for the default key .
32 Network setting of the projector (cont.) Y ou can change the projector name on the network. It makes easy to recognize projectors in <Select Access Port> window .
33 Enter the password using the [ Ÿź ENTER] buttons. 4 After entering the password, select [OK] and click [ENTER]. T o cancel the change, select [CANCEL] and press the [ENTER] button.
34 Select [ST A TUS] at the network menu and press the [ENTER] button. Y our current settings appear . V erifying settings PT -FW100NT USER1 RETURN ENTER SELECT LANGUAGE OPTION SECURITY NETWORK POSITI.
35 Using W ebBrowser Select [WEB CONTROL] at the network menu. 1 Select [ON] or [OFF] with the [ ] buttons. ON : This enables control on the WebBrowser . OFF : This disables control on the WebBrowser . 2 Control a projector through the WebBrowser of a computer .
36 Using W ebBrowser (cont.) Enabling JavaScript If JavaScript has been set to disable, enable it. 2 Place a checkmark in the [Enable JavaScript] checkbox next to Web Content. Open the [Security] tab in Safari. 1 Accessing from the W ebBrowser <T op window> 1 Select [WEB control] from the menu.
37 Using W ebBrowser (cont.) This page indicates the projector status. T o access this page from other pages, click [Status] at the left of the window. Monitor information window The monitor information is refreshed at fixed intervals, but the current exact information can be checked by clicking [View] ĺ [Reload Page].
38 Y ou can make various projector settings. T o access this page from other pages, click [Projector control] at the left of the window. Projector control window Basic control window On this window , click the [Basic control] tab. Advanced control window On this window , click the [Advanced control] tab.
39 Using W ebBrowser (cont.) 3 Complete the detailed settings and click [NEXT]. When [NEXT] is clicked, the next page appears, enabling you to complete the detailed settings as desired. After all required items have been entered, a confirmation window appears.
40 Using W ebBrowser (cont.) Time settings Click [Detailed set up] ĺ [Adjust clock] in the menu. T ime zone : Select the time zone and click [Set time zone]. T ime : Enter the current date and time in [Date] and [T ime], and then click [Set date and time].
41 Using W ebBrowser (cont.) ※ Example of email message sent If [NORMAL] is selected under [MAIL CONTENTS] ヂ If you have completed the email settings ッ If an error occurs If [SIMPLE] is selected.
42 Using W ebBrowser (cont.) Password settings Click [Detailed set up] ĺ [Change password] in the menu. Set a password for access of the [Projector control window]. Enter the previous password and the new password. Enter the new password in [Retype] and click [OK].
43 Software Uninstall Wireless Manager ME 4.5 2 Select [Empty T rash...] from the [Finder] menu. Drag-and-drop [ ] from the [Applications] folder to the [T rash].
44 Glossary Category Item Descriptions Page Common Setting of connections LAN Abbreviation for Local Area Network. This is a network with a relatively narrow range such as inside a company . 8 Access point These are stations for relaying electromagnetic signals between computers in a wireless LAN.
45 Glossary (cont.) Category Item Descriptions Page Advanced setting of connection AD_HOC This is the mode in which computers communicate with each other directly , rather than via access points. 30 INFRASTRUCTURE (infrastructure mode) This is the mode in which communications are performed via the access point.
46 Frequently Asked Questions Check the following points once more before requesting repair . No wireless connection can be made between my projector and my computer . • Is Wireless Manager ME 4.5 running? Wireless Manager ME 4.5 must be started in the computer in order to enable wireless transmissions of images to the projector .
47 Frequently Asked Questions (cont.) The connection to the wireless LAN or wired LAN is lost. • If the live mode is canceled or the connection is lost, start the reconnection procedure from the menu.
48 Frequently Asked Questions (cont.) There is a time lag between operations at the computer and results in the projected image. • Wireless Manager ME 4.5 reads the screen, compresses the data and transmits it to the projector . In the projector , the received data are extracted and then projected.
T rademarks Matsushita Electric Industrial Co., Ltd. Web Site: http://panasonic.net © 2007 Matsushita Electric Industrial Co., Ltd. All Rights Reserved. TQBH0186-2 (E/U/EA) M0707-1 127 Notes: • Unauthorized use or reproduction of part or all of this product software and manuals is strictly prohibited.
An important point after buying a device Panasonic PT-F200NTE/PT-FW100NTE (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Panasonic PT-F200NTE/PT-FW100NTE yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Panasonic PT-F200NTE/PT-FW100NTE - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Panasonic PT-F200NTE/PT-FW100NTE you will learn all the available features of the product, as well as information on its operation. The information that you get Panasonic PT-F200NTE/PT-FW100NTE will certainly help you make a decision on the purchase.
If you already are a holder of Panasonic PT-F200NTE/PT-FW100NTE, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Panasonic PT-F200NTE/PT-FW100NTE.
However, one of the most important roles played by the user manual is to help in solving problems with Panasonic PT-F200NTE/PT-FW100NTE. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Panasonic PT-F200NTE/PT-FW100NTE along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
