Instruction/ maintenance manual of the product PT-F200 Panasonic
Go to page of 10
< 1 > S PEC F ILE Product Number : PT - F200 Product Name : LCD Projector As of October 2008. Appearance and specifications are subject to change without notice.
S PEC F ILE PT - F200 LCD Projector As of October 2008 < 2 > Specifications Power supply Power consumption Optical system LCD panel Panel size Display method Drive method Pixels Pixel configurat.
S PEC F ILE PT - F200 LCD Projector As of October 2008 < 3 > Dimensions (W x H x D) W eight Operating environment T emperature Humidity Remote control unit Power supply Operation range* 2 Dimensions (W x H x D) W eight Supplied accessories Optional accessories 432 x 124.
S PEC F ILE PT - F200 LCD Projector As of October 2008 < 4 > T erminals 1 LAN 2 Computer 1 input 3 Computer 2 input/computer 1 output 4 S-Video input 5 Video input 6 Component input 7 Audio inpu.
S PEC F ILE PT - F200 LCD Projector As of October 2008 < 5 > Shift range Optical axis shift function allows to shift the position of a projected image as shown below . H (Width of projected image) V (Height of projected image) 0.5V 0.5V 0.32H 0.
S PEC F ILE PT - F200 LCD Projector As of October 2008 < 6 > Computer data compatibility This projector accepts up to 91 kHz horizontal scanning fr equency and 162 MHz dot clock. NOTE: Pixel thinning is applied to signals that exceed a dot clock frequency of 110 MHz.
S PEC F ILE PT - F200 LCD Projector As of October 2008 < 7 > STX ETX C1 C2 C3 : P1 P2 P3 P4 Start (1 byte) End (1 byte) Colon (1 byte) Parameter (1-4 bytes) Command (3 bytes) (Control and/or query commands) Serial connector The serial connector complies with RS-232C.
S PEC F ILE PT - F200 LCD Projector As of October 2008 < 8 > Control commands * 1 Do not s end PON, POF, or O S H command s continuou s ly in a s hort period of time.
S PEC F ILE PT - F200 LCD Projector As of October 2008 < 9 > Parameter format Parameter format S ize (Byte) Difinition <pl> <off on> <input s ignal> <in s tallation> <.
S PEC F ILE PT - F200 LCD Projector As of October 2008 < 10 > Notes on Projector Placement and Operation: The projector uses a high-wattage lamp that becomes very hot during operation. Please observe the following precautions. 1. Never place objects on top of the projector while it is operating.
An important point after buying a device Panasonic PT-F200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Panasonic PT-F200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Panasonic PT-F200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Panasonic PT-F200 you will learn all the available features of the product, as well as information on its operation. The information that you get Panasonic PT-F200 will certainly help you make a decision on the purchase.
If you already are a holder of Panasonic PT-F200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Panasonic PT-F200.
However, one of the most important roles played by the user manual is to help in solving problems with Panasonic PT-F200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Panasonic PT-F200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
