Instruction/ maintenance manual of the product PT-DW5100 Panasonic
Go to page of 18
< 1 > S PEC F ILE Product Number : PT - DW5100 / DW5100L Product Name : DLP ™ Projectors As of January 2009. Specifications subject to change without notice.
S PEC F ILE PT - DW5100 / DW5100L DLP ™ Projectors As of January 2009 < 2 > Specifications Main Unit Power supply: North America: Europe: Power consumption: North America: Europe: DLP™ chip:.
S PEC F ILE PT - DW5100 / DW5100L DLP ® Projectors As of January 2009 < 3 > On-screen menu: Dimensions (W x H x D): PT -DW5100 PT -DW5100L W eight: PT -DW5100 PT -DW5100L Operating temperature:.
86.5 (3-13/32) 157 (6-3/16) 167 (6-9/16) R30 (1-3/16) 368 (14-1/2) 478.5 (18-27/32) 425 (16-23/32) 441 (17-3/8) 4 (5/32) 12 (15/32) 436 (17-5/32) 530 (20-7/8) Dimensions unit : mm (inch) NOTE: This illustration is not drawn to scale. The illustration shows the PT -DW5100.
S PEC F ILE PT - DW5100 / DW5100L DLP ® Projectors As of January 2009 < 5 > Standard setting-up position (when installed using the ET -PKD56H) Upper edge of projected image 256 (10-3/32˝) * 1 .
S PEC F ILE PT - DW5100 / DW5100L DLP ® Projectors As of January 2009 < 6 > 50 60 70 80 90 100 120 150 200 250 300 400 500 600 S creen s ize (inch, diagonal) min. max. Zoom Zoom len s e s Fixed-focu s Fixed- focu s len s Di s tance to s creen (L) Height from the edge of s creen to center of len s (H) min.
S PEC F ILE PT - DW5100 / DW5100L DLP ® Projectors As of January 2009 < 7 > 50 60 70 80 90 100 120 150 200 250 300 400 500 600 S creen s ize (inch, diagonal) min. max. min. max. Zoom Zoom len s e s Fixed-focu s Fixed- focu s len s* Di s tance to s creen (L) min.
S PEC F ILE PT - DW5100 / DW5100L DLP ® Projectors As of January 2009 < 8 > 50 60 70 80 90 100 120 150 200 250 300 400 500 600 S creen s ize (inch, diagonal) min. max. Zoom Zoom len s e s Fixed-focu s Fixed- focu s len s Di s tance to s creen (L) Height from the edge of s creen to center of len s (H) min.
S PEC F ILE PT - DW5100 / DW5100L DLP ® Projectors As of January 2009 < 9 > 50 60 70 80 90 100 120 150 200 250 300 400 500 600 S creen s ize (inch, diagonal) min. max. min. max. Zoom Zoom len s e s Fixed-focu s Fixed- focu s len s* Di s tance to s creen (L) min.
S PEC F ILE PT - DW5100 / DW5100L DLP ® Projectors As of January 2009 < 10 > Calculation of the projection distance For a screen size dif ferent from the above, use the equation below to calculate the pr ojection distance. Aspect ratio 15:9 minimum L (mm) = (diagonal screen size in inches) x 30.
S PEC F ILE PT - DW5100 / DW5100L DLP ® Projectors As of January 2009 < 11 > Aspect ratio 16:9 minimum L (mm) = (diagonal screen size in inches) x 30.5 – 45 maximum L (mm) = (diagonal screen size in inches) x 41.1 – 48 minimum L (mm) = (diagonal screen size in inches) x 30.
H (Width of projected image) V (Height of projected image) 0.6V 0.1H 0.1H S tandard po s tition of projected image H (Width of projected image) V (Height of projected image) 0.
S PEC F ILE PT - DW5100 / DW5100L DLP ® Projectors As of January 2009 < 13 > List of compatible signals This projector supports RGB signals with horizontal fr equencies of 15 to 91 kHz, vertical frequencies of 50 to 85 Hz and up to 150 MHz dot clock.
S PEC F ILE PT - DW5100 / DW5100L DLP ® Projectors As of January 2009 < 14 > Serial connector The serial connector complies with RS-232C. T o control the pr ojector from a personal computer , com- mands must be input through communication softwar e, based on the format and satisfying the commu- nication conditions shown below .
S PEC F ILE PT - DW5100 / DW5100L DLP ® Projectors As of January 2009 < 15 > Control commands * 1 Do not s end PON, POF, O S H, or OLP command s continuou s ly in a s hort period of time. Doing s o may bur s t the lamp or s horten the lamp replacement cycle.
S PEC F ILE PT - DW5100 / DW5100L DLP ® Projectors As of January 2009 < 16 > Status asking commands Item Command : Parameter Function Description Callback POWER CONDITION FREEZE SHUTTER INPUT SIGNAL TEST ON SCREEN PICTURE MODE SYSTEM DAYLIGHT VIEW COLOR TINT COLOR TEMP.
S PEC F ILE PT - DW5100 / DW5100L DLP ® Projectors As of January 2009 < 17 > Parameter format Parameter format S ize (Byte) Difinition <pl> <off on> <input s ignal> <in s t.
S PEC F ILE PT - DW5100 / DW5100L DLP ® Projectors As of January 2009 < 18 > Notes on Projector Placement and Operation The projector uses a high-wattage lamp that becomes very hot during operation. Please observe the following precautions. 1. Never place objects on top of the projector while it is operating.
An important point after buying a device Panasonic PT-DW5100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Panasonic PT-DW5100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Panasonic PT-DW5100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Panasonic PT-DW5100 you will learn all the available features of the product, as well as information on its operation. The information that you get Panasonic PT-DW5100 will certainly help you make a decision on the purchase.
If you already are a holder of Panasonic PT-DW5100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Panasonic PT-DW5100.
However, one of the most important roles played by the user manual is to help in solving problems with Panasonic PT-DW5100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Panasonic PT-DW5100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center