Instruction/ maintenance manual of the product NV-SJ430PMP Panasonic
Go to page of 41
Video Cassette Recorder NV-FJ63 0PMP NV-SJ43 0PMP Operating Instructions Instrucciones de funcionamiento VQT9630 Before attempting to connect, operate or adjust this product, please read these instructions completely.
2 AUTO CHANNEL SET PROCEEDING END : MENU 2 Dear Cu stomer Thank you for purchasing this Panasonic Video Cassette Recorder. We strongly suggest that you carefully study the Operating Instructions before attempting to operate the VCR, and that you note the listed precautions.
3 As this equipment gets hot during use, operate it in well ventilated place; do not install this equipment in a confined space such as a book case or similar unit.
4 IN VIDEO L R AUDIO OUT 21 24 19 20 22 23 RF OUT IN ( AV1 ) POWER JET REW SEARCH TIMER REC Í / I Á EJECT REC/OTR 6 / 6 REW 5 / 5 FF STOP PLA Y PICTURE MODE CVC 12 8 7 6 14 13 16 17 12 11 9 18 10 3 .
5 Before Use FRONT 0 1 POWER Í /I (POWER Í ) ( ‘ 11) 0 2 TIMER REC Á (TIMER Á ) ( ‘ 27) 3 SEARCH ( ‘ 33) 4 JET REW 6 ( ‘ 22) 0 5 Cassette Compartment ( ‘ 21) 6 EJECT < ( ‘ 12) 8 7 S.
6 0 3 Numeric Buttons ( ‘ ‘ ‘ ‘ ‘ 15, 24) Selects program positions of the VCR. ≥ Ensure that VCR/TV switch is set to VCR . 0 4 NAVI ( ‘ 30) 0 5 On Screen Display Menu Operation Buttons ( ‘ 13) MENU OK 3421 0 6 Timer Recording Operation Buttons ( ‘ 27– 29) DATE, CH, ON, OFF PROG.
7 Before Use Installing the Batteries Insert the batteries with the polarity ( + and - ) correctly aligned. Power Source for the Remote Controller: The remote controller is powered by 2 “ AA ” , “ UM3 ” or “ R6 ” size batteries. The life of the batteries is about one year, although this depends on the frequency of use.
8 IN OUT RF OUT IN ( AV1 ) IN VIDEO L R AUDIO OUT RF OUT IN ( AV1 ) 3 1 2 Connections TV Set (Not supplied) Antenna (Not supplied) Antenna Input Connector To mains supply ≥ Use the plug adaptor supplied if it is needed to fit the shape of the power outlet which will be used.
9 Setting Up IN VIDEO L R AUDIO OUT 4 RF OUT IN ( AV1 ) 3 1 2 IN VIDEO AUDIO OUT RF OUT IN ( AV1 ) 3 4 1 2 Connection to a TV using the Audio/Video Input Sockets Antenna Input Connector TV Set (Not su.
10 Cable Connection Cable-VCR-TV (For CATV/PAY Channels Recording/Playback) The VCR has an extended range, and can tune the Low-Band, Mid-Band, Super-Band, Hyper- Band, Ultra-Band, and Special cable channels (Channels A-5 – A-1, A – W, AA – FFF, GGG – WWW, WWW r 1 – WWW r 12, 100 – 125, 5A).
11 Setting Up Í DIRECT REC REPEA T VOLUME SEARCH PICTURE MODE REC VCR DA TE CANCEL AUDIO RESET OSD/DISPLA Y VCR/TV SPEED ++ – + – ON OFF TV AV + – MENU OK PROG.
12 AUTO CHANNEL SET PROCEEDING END : MENU 2 AUTO TUNING IS COMPLETED. END: MENU Disappears 2 3 Select a program number on the TV which you wish to use as the video viewing channel. Then tune in the TV to the picture from the screen being auto tuned or the screen selected with the I and J buttons of the VCR.
13 Setting Up Í DIRECT REC REPEA T VOLUME SEARCH PICTURE MODE REC VCR DA TE CANCEL AUDIO RESET OSD/DISPLA Y VCR/TV SPEED ++ – + – ON OFF TV AV + – MENU OK PROG.
14 6 Select CH by pressing 3 or 4 and then select the program position by pressing 2 or 1 . 7 Select BLANK by pressing 3 or 4 and then select ON or OFF by pressing 2 or 1 .
15 Setting Up Í DIRECT REC REPEA T VOLUME SEARCH PICTURE MODE REC VCR DA TE ++ – + – ON OFF TV AV + – MENU OK NA VI INDEX 123 78 0 9 4 5 6 1 2 3 4 POWER INPUT SELECT JET REW 100 – 2 § CH Set.
16 Operations 1 Press MENU. 2 Select CLOCK SET by pressing 3 or 4 and then press OK . 3 Set D.S.T. (Daylight Saving Time) by pressing 3 or 4 . ≥ Select YES to set daylight saving time. The time on the clock is advanced by 1 hour. ≥ Select NO to return to standard time.
17 Setting Up SEARCH PICTURE MODE REC VCR DA TE CANCEL AUDIO RESET OSD/DISPLA Y VCR/TV SPEED ++ – + – ON OFF TV MENU OK PROG. / CHECK TIMER Á 1 2 3 4 JET REW – CH Settings Using the On Screen Display Preparations ≥ Confirm that the TV is on and the VCR viewing channel is selected.
18 For the Blue Background Function When BLUE BACK is ON , the screen will always have a blue background when you play back the unrecorded portions. Follow steps 1 to 2 on page 17. 3 Select BLUE BACK by pressing 3 or 4 . 4 Select ON or OFF by pressing 2 or 1 .
19 Setting Up For the Jet Navigator Function Follow steps 1 to 2 on page 17. 3 Select JET NAVIGATOR by pressing 3 or 4 . 4 Select ON or OFF by pressing 2 or 1 . ≥ When JET NAVIGATOR is ON , appears on the VCR display and Jet Navigator function works.
20 Audio Channel Selection (NV-FJ630PMP only) When a stereo and/or AUDIO II (SAP) broadcast is received, STEREO and/or SAP are lit to inform you of the type of broadcast. Follow steps 1 to 2 on page 17. On Screen Display 3 Select MTS by pressing 3 or 4 .
21 Basic operations Operations 1 Insert a recorded video cassette tape. 2 Start viewing the picture by pressing 1 (PLAY) . 3 Search forward by tapping 5 (FF) . (Cue) ≥ To change back to normal playback, press 1 (PLAY) . 4 Search backward by tapping 6 (REW) .
22 VCR TV MENU OK JET REW Other Playback Functions To Stop Playback Automatically (Playback Off Timer Function) If you set the playback duration, the playback will stop automatically. After the set playback time has elapsed, the VCR automatically stops playback and switches off.
23 Basic operations Beginning of Tape End of Recorded Part Repeat Playback PLAY REW Control signal Interruption (at least 5 sec.) Notes: ≥ Repeat Playback function does not work during Play-Off Timer. ≥ Press ∫ (STOP) to release the VCR from the Repeat Playback mode.
24 POWER JET REW PICTURE MODE SEARCH TIMER REC Í / I Á EJECT REC/OTR 6 / 6 REW 5 / 5 FF STOP PLA Y 1 5 3 4 Manual Recording § Set VCR/TV switch to VCR for using POWER Í , the I and J buttons and the numeric buttons . Operations 1 Insert a video cassette tape with an intact erasure prevention tab.
25 Basic operations To Interrupt Recording Press ; / D (PAUSE/SLOW) during recording. Press it again to continue recording. To View One TV Program while Recording Another One 1 Refer to steps 1 – 4 of the manual recording operation. 2 Press VCR/TV to select the TV mode.
26 Direct Recording This function allows you to immediately start recording the same scenes of program that you are viewing on the TV. Conditions for correct operation of the Direct Recording function: ≥ Set DIRECT REC to ON . (See page 19.) ≥ The VCR must be connected to the TV ’ s Audio/Video output sockets via Audio/Video cable as shown.
27 Advanced operations Operations 1 Press PROG./ CHECK . 2 Set Date to “ 27TH ” . 3 Set Program position (channel) to “ 2 ” . 4 Set Starting time to “ 20:02 ” . ≥ When kept pressed, the indication changes in 30-minute steps. 5 Set Ending time to “ 21:30 ” .
28 ≥ The tape length must be set correctly. (See page 18.) ≥ Tapes except T30, -60, -90, -120, -140, -160, -180 tapes may not work correctly. Selecting the Desired Tape Speed Press SPEED to make the selection in any of steps 1 – 5 .
29 Advanced operations To Activate the Auto SP/EP Change Function: Press SPEED to select A . ≥ Every time you press SPEED , the indication changes in the following order: SP > EP > A > SP Checking a Timer Program ≥ The VCR must be turned on, or the timer recording indicator “ Á ” lit.
30 VOLUME SEARCH PICTURE MODE REC VCR DA TE CANCEL AUDIO RESET OSD/DISPLA Y VCR/TV SPEED ++ – + – ON OFF TV AV + – MENU OK PROG. / CHECK TIMER Á NA VI INDEX 78 0 9 1 2 3 4 JET REW 100 – CH Search Functions Jet Navigator This VCR can display a list of the recorded programs on the inserted video cassette on the TV screen.
31 Advanced operations To Set the Category The category setting allows you to find what kind of programs are recorded by the character and the icon indications. Press 1 while the Jet Navigator list appears. Notes: ≥ The Jet Navigator list is stored in each cassette.
32 To Check the Recorded Programming Data (Time Stamp Function) When playback starts after searching with Jet Navigator function or index search function, recorded programming data (called Time Stamp) appears on the TV screen for approx. 5 seconds. Preparations ≥ Display the VCR picture on the TV.
33 Advanced operations SEARCH PICTURE MODE REC VCR DA TE CANCEL AUDIO RESET OSD/DISPLA Y VCR/TV SPEED ++ – + – ON OFF TV MENU OK PROG. / CHECK TIMER Á NA VI INDEX 1 2 3 4 JET REW – CH To Find the Beginning of Each Recording (VHS Index Search System) Example: Searching for the 2nd recorded segment in the forward direction.
34 Í DIRECT REC REPEA T VOLUME SEARCH PICTURE MODE REC VCR TV AV + – MENU OK NA VI INDEX 123 78 0 9 4 5 6 1 2 3 4 POWER INPUT SELECT JET REW 100 1 5 3 2,4 Editing Assembly Editing This function can be used to make up an edited tape from other recordings or video sources.
35 Advanced operations POWER JET REW PICTURE MODE SEARCH TIMER REC Í / I Á EJECT REC/OTR 6 / 6 REW 5 / 5 FF STOP PLA Y Other Functions Tracking Adjustment and Vertical Locking Adjustment ≥ For man.
36 Before Requesting Service Before requesting service, check the following points again. Message of On Screen Display On screen display messages are displayed. The error message is indicated in brackets [ ]. [PLEASE PUT IN A VIDEO CASSETTE.] ‘ REC ¥ ( ¥ REC/OTR) or TIMER Á (TIMER REC Á ) has been pressed without a video cassette inserted.
37 Helpful Hints Playback will not operate correctly The symptom description is indicated in quatations “” . “ The picture is noisy or is not in color. Horizontal bars or lines run down the screen. ” ‘ Tracking is not correct. Adjust the tracking.
38 Usage Precautions Please read these precautions before you operate this VCR. Avoid Sudden Changes in Temperature If the VCR is suddenly moved from a cold to a warm place, dew may form on the tape and inside the VCR. Humidity and Dust Avoid places where there is high humidity or much dust, which may cause damage to internal parts.
39 Helpful Hints If a clear picture is not produced, insert a commercially available cleaning cassette. Then, press REC ¥ ( ¥ REC/OTR) and keep it running for approximate 10 seconds to clean the video heads. If the problem still persists after performing all of the measures listed above, contact a service personnel to request assistance.
40 Specifica tions NV-FJ630PMP NV-SJ430PMP Power Source: 110 – 240 V AC 50/60Hz Power Consumption: 13 W (NV-FJ630PMP) 11 W (NV-SJ430PMP) Video Recording System: 2 rotary heads, helical scanning system Video Heads: 4 heads Audio Heads: 2 heads (NV-FJ630PMP only) Tape Speed: SP; 33.
ENGLISH Important Information To loose a Cable Strap: Push up a strap in the direction of the arrow, pushing a Lock Tab. VQC4169 Cable Strap/ Correa de cable Lock Tab/ Lengüeta de bloqueo ESPAÑOL Información importante Para aflojar la Correa de cable: Levante la correa en el sentido de la flecha, empujando la Lengüeta de bloqueo.
An important point after buying a device Panasonic NV-SJ430PMP (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Panasonic NV-SJ430PMP yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Panasonic NV-SJ430PMP - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Panasonic NV-SJ430PMP you will learn all the available features of the product, as well as information on its operation. The information that you get Panasonic NV-SJ430PMP will certainly help you make a decision on the purchase.
If you already are a holder of Panasonic NV-SJ430PMP, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Panasonic NV-SJ430PMP.
However, one of the most important roles played by the user manual is to help in solving problems with Panasonic NV-SJ430PMP. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Panasonic NV-SJ430PMP along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
