Instruction/ maintenance manual of the product KX-TG8021BX Panasonic
Go to page of 56
This unit is comp atible with C aller ID. Y ou must s ubscribe to the appropriat e servic e offe red by your s ervice pr ovider/tel ephone com pany . Please r ead these operating instructions before us ing the unit and save them for future refere nce.
T able of Contents 2 Introduction Product informati on . . . . . . . . . . . . . . . 3 Access ory informat ion . . . . . . . . . . . . . 4 For your saf ety . . . . . . . . . . . . . . . . . . 6 Import ant safet y instructions . . . . . . . . 7 For best performance .
Introduction 3 Product information Thank you for purchasing a Panasonic digi tal cor dless phone. Import ant : L The suffix (BX) in the following model numbers w ill be omitted in these instructions: KX-TG801 1BX/KX-TG 8012BX/KX-TG8021BX Model composition KX-TG8011 series KX-TG8021 L Model shown is KX-TG8012.
Introduction 4 Feature difference s Accessory information Supplie d accessories *1 See page 5 for replacement battery inform ation. *2 The handset cover comes attached to the handset. Model N o. Answering system Inter com N ⇔ N *1 KX-TG801 1 – r *2 KX-TG801 2 – r KX-TG802 1 rr *2 *1 Intercom calls can be made between t he handsets.
Introduction 5 Additional/re placemen t accesso ries Please contact your n earest Panas onic dealer for sales information. Replacement battery information: L Replace batteries only wit h a nickel metal hydride (N i-MH) type of ba ttery . This model requires 2 AAA (R03) batteries for ev ery handset.
Introduction 6 For your safety T o prevent severe injury and loss of life/property , read this section carefully before using the product t o ensure proper and safe operation of your product. W ARNING Power conn ection L Use only the power sou rce marked on the product.
Introduction 7 L Never touch uninsulated telephone wires or term inals unless the telephone line has been disconnected at the network interface. L Use caution when inst alling or modifying telephone lines. L The AC adaptor is used as t he main disconnect device.
Introduction 8 between the handset and base unit in an indoor env ironment. – away from electronic appliances such as TVs, radios, personal computers , wireless devices or other phones.
Pre parat ion 9 Controls Base unit ■ KX-TG801 1/KX-TG8012 A Charge contact s B {x} (Locat or) Base unit ■ KX-TG8021 A Charge contact s B Speaker C { ■ } (Stop) D { 4 } (Erase) E {^} (V olume up).
Preparati on 10 Using the navigato r key The handset navigator key can b e used to navigate through menus and to select items shown on t he display by pres sing {^} , {V} , { < } , o r { > } . T o adjust the receiver or speaker volume , press {^} to increase the volume, or press {V} to decrease the volume repeatedly while talking.
Pre parat ion 11 Menu icon s When in standby mode, pressing the middle soft key reveals the handset’s top-menu. From her e you can acc ess various features and settings. Soft key icons z New voice mail message received. *3 (page 39) L Someone is using t he line.
Preparati on 12 Connections Connect the AC adaptor cord ( A ) by pressing the plug firmly ( B ). Connect the telephone line cord until it clicks into the base unit and telephone line jack ( C ). Base unit L Use only the supplied P anasonic AC adaptor PQL V207BX.
Pre parat ion 13 Battery installation and replacement Import ant : L Use the supplied rechargeable batteries (Part No. HHR-55AAAB). L When installing the batteries: – Wipe the battery ends ( S , T ) with a dry clot h. – Avoid touching the battery ends ( S , T ) or the uni t contacts.
Preparati on 14 Note: L It is normal fo r the handset to f eel warm during charging. L If you want to u se the unit immediately , charge the batteries for at least 15 minutes. L Clean the charge contact s of the handset, base unit, and charger with a soft, dry cloth once a month.
Pre parat ion 15 Charger Symbols used in these operating instructions T urning the power on/off Power on Press {ih} f or about 1 second. Power of f Press {ih} f or about 2 seconds . Setting up the unit before use Display language Y ou c an select “ English ” , “” , or “” .
Preparati on 16 Dialling mode If you cannot mak e calls, change this setting according to your telephone line service. The default setting is “ Tone ” .
Making/Ans wering Calls 17 Making calls 1 Lift the handset and dial the phone number . L T o correct a digit, press { C/ T } . 2 {C} 3 When you finish talking, pres s {ih} or place the handset on the base unit or charger . Using the speakerphone 1 Dial the phone number , and press {s} .
Making/An swering Calls 18 Answering calls When a call is being received, the ringer indicator on the handset flashes. 1 Lift the handset and press {C} or {s} when the unit rings . L Y ou can also answer the call by pressing any dial k ey from { 0 } to { 9 } , {*} , or { # } .
Making/Ans wering Calls 19 2 Press {*} when prompted to enter your code or PIN, then press the appropriate dial keys . Note: L The dialling mode will return to pulse when you hang up.
Phonebook 20 Handset phonebook The phonebook allows you to make calls without having t o dial manually . Y ou can add 200 names and phone numbers, assign each phonebook entry to the desired category . Adding entries 1 n (left soft ke y) i K 2 {V} / {^} : “ New Ent ry ” i M 3 Enter the party’s name (16 characters m ax.
Phonebook 21 L If you select “ All ” , the unit ends the category search. 4 {V} / {^} : Scroll through the phonebook if necessary . 5 {C} Editing entries 1 Find the desired entry (page 20). i K 2 {V} / {^} : “ Edit ” i M 3 Edit the name if nec essary (16 characters max.
Phonebook 22 Chain dial This feature allows you to dial phone numbers in the phonebook while you ar e on a call. This f eature can be used, f or example, to dial a calling card access number or bank account PIN that you have stored in the phonebook, without having to dial manually .
Programming 23 Programmable settings Y ou can customise the unit by programming th e following features using the handset. Programming by scrolling through th e display menus 1 K (middle soft key) 2 Select the desired top-menu by pressing {V} , {^} , { < } , o r { > } .
Programming 24 *1 If you program these settings using one of the handset s, you do not need to program the same item using another handset. *2 If you select one of the melody ringer tones, the ringer tone conti nues to play for several seconds even if the caller has already hung up.
Programming 25 *5 This feature allows the handset to switch it self to dimmed backlight mode after being placed on the base unit or c harger . – “ On ” : Backlight is dimmed.
Programming 26 Special instructions for programmable settings Memo alarm An alarm sounds at the set time for 3 minutes. A text memo can also be displayed for the alarm. A total of 3 separate alarm times can be programmed fo r each handset. Y ou can set one of 2 diff erent alarm options (once or daily) for each alarm time .
Programming 27 2 {V} / {^} : “ Time Se ttings ” i M 3 {V} / {^} : “ Time Adjustment ” i M 4 {V} / {^} : Sele ct “ Caller ID[Auto] ” or “ Manual ” . i M i {ih} Night mode Night mode allows you t o select a period of time during which the handset w ill not ring for outside calls.
Programming 28 4 {V} / {^} : “ Select Category ” i M 5 Press the desired category numbers. i M L The selected category number flashes. L T o cancel a selec ted category number , press the number again.
Programming 29 Registering a handset to a base uni t The supplied handset and base unit are pre-registered. If for some reason the handset is not regist ered to the base unit (for example, w flashes even when the handset is near the base unit), re- register the handset .
Programming 30 5 {V} / {^} : “ Yes ” i M L A confirmation ton e sounds as each handset number disappears. L The handset does not beep when cancelling its own registration. 6 {ih} Cancelling a base un it A handset c an cancel a base unit that it is registered to.
Caller ID Service 31 Using Caller ID service Import ant : L This unit is Caller ID comp atible. T o use Caller ID features, you must subscribe to a Caller I D service. Contact your service provider/ telephone company for detail s. Caller ID features When an outside call is be ing received, the caller ’ s phone number is displayed.
Caller ID Servic e 32 Caller list Import ant : L Only 1 person can access the caller list at a time. Viewing the caller list and calling b ack 1 K (middle soft key) i j i M 2 Press {V} to search from the most recent call, or press {^} to search from the oldest call.
Answering System 33 Answering system The answering system can answer and record calls for you when you are unavailable to answer the phone. Y ou can also set the unit to play a greeting message but not to record caller messages. Select “ Greeting Only ” as the recording time se tting (page 38).
Answer ing System 34 Greeting message When the unit ans wers a call, calle rs hear a greeting message. Y ou can record your own greeting message or use a pre-recor ded greeting mess age. Recording your gre eting message Y ou can record your own greeting message (2 m inutes max.
Answering System 35 Operating the an swering system *1 If pressed within the first 5 seconds of a message, the previous message is played. Erasing a ll message s Press { 4 } 2 times while the u nit is not in use.
Answer ing System 36 Erasing a ll message s 1 K (middle soft key) i I i M 2 {V} / {^} : “ Erase M essage ” i M 3 {V} / {^} : “ Erase A ll ” i M 4 {V} / {^} : “ Yes ” i M i {ih} Calling back (Caller ID subscrib ers only) If caller information is received for t he call, you can call the caller back while listening to a mess age.
Answering System 37 Remote commands Y ou can press dial keys to access certain answering system functions without waiting for the voice guidance to prompt you. T urning on the answering system remotely If the answering system is off, you can turn it on remotely .
Answer ing System 38 2 {V} / {^} : “ Setting s ” i M 3 {V} / {^} : “ Number of Rings ” i M 4 {V} / {^} : Select the des ired setting. i M i {ih} For voice mail service subscribers T o receive .
V oice Mai l Service 39 V oice mail service V oice mail is an automatic answering service offered by your service provider/ telephone company . After you subscribe to this service, you r service provider/ telephone company’s voice mail system answers calls f or you when you are unavailable to answer the phone or when your line is busy .
Inte rcom /L ocat or 40 Intercom Intercom calls can be made between handsets in the same radio cell. Note: L If you receive an outside call while talking on the intercom, you hear interrupt tones. T o answer the call, pres s {ih} , then press {C} . L When paging t he handset for an intercom call, the paged handset beeps for 1 minute.
Inte rcom /L ocat or 41 T ransferring a call without speaking to the other hand set use r 1 During an outside call, press { INT } . i Enter the desired handset number . L k flashes to indicate the outside call is on hold. 2 {ih} L The outside call rings at the other handset.
Useful Inform ation 42 Character entry The dial keys are used to enter characters and numbers. Each dia l key has multiple characters assigned t o it. The available characte r entry modes are Alphabet (ABC) , Numeric (0-9), Arabic/Persian ( ) and Extended ( G ).
Usef ul In for mati on 43 Numeric entry table (0-9) Arabic character table ( ) L When you selec t Arabic as the display language, Arabic c haracter table is available. Persian character tabl e ( ) L When you select Persian as the display language, Persian character table is available.
Useful Inform ation 44 Error messages If the unit detects a problem, one of the following message s is shown on the display . *1 KX-TG8021 Display message Cause/solution Answer Sys. Full *1 L Erase unnecessary mes sages (page 35). Check Tel Line L The supplied telephone line c ord has not been connected yet or not connected pro perly .
Usef ul In for mati on 45 T rouble shooting If you still have difficulties after following the instru ctions in this section, disconnect the base unit’ s AC adaptor and turn off t he handset, then reconnect the base unit’ s AC adaptor and turn on the handset.
Useful Inform ation 46 Progr ammable se ttings I do not know how to erase y (Missed call) f rom the display . L There are unviewed missed calls remaining. View them and erase y in the following way . 1 K (middle soft key) i j i M 2 Press {V} to search from the most recent call, or press {^} to search from the oldest call.
Usef ul In for mati on 47 Battery recharge Making /answering calls, interco m Probl em Cause/solution The handset beeps and/or 3 flashes. L Battery charge is low . Fully charge the batteries (page 13). I fully charged the batteries, but 3 still flashes.
Useful Inform ation 48 *1 KX-TG8021 Call er ID I cannot mak e a call. L The dialling mode m ay be set inc orrectly . Change the setting (page 16). L The handset is too far fr om the base unit. Move closer and try again. L Another unit is in use. Wait and try again later .
Usef ul In for mati on 49 Answering system (KX-TG8021) Probl em Cause/solution The unit does not r ecord new messages. L The answering system is turned off. T urn it on (page 33). L The message memory is full. Erase unnecessary mes sages (page 35). L The recording time is set to “ Greeting Only ” .
Useful Inform ation 50 Liquid da mage Cauti on: L T o avoid permanent damage, do not use a m icrowave oven to s peed up the drying process. Probl em Cause/solution Liquid or other form of moisture has entered the handset/base unit. L Disconnect the AC adaptor and telephone line cord from the base unit.
Usef ul In for mati on 51 Specifications ■ St anda rd: DECT (Digital Enhanced Cordles s T elecommunications), GAP (Generic Access Profile) ■ Number of channels: 120 Duplex Channels ■ Freque ncy range: 1.
Index 52 Index A Additional base units: 28 Additional handsets: 28 Alarm: 26 Answ erin g call s: 18 Answering syst em: 33 Call screening: 33 , 38 Erasing messages : 35 , 37 Greeting only: 38 Listening.
Notes 53 TG8011_8021BX(e).book Page 53 Monday, September 29, 2008 1:07 PM.
Notes 54 TG8011_8021BX(e).book Page 54 Monday, September 29, 2008 1:07 PM.
Notes 55 TG8011_8021BX(e).book Page 55 Monday, September 29, 2008 1:07 PM.
PNQX 1396ZA CC1008DN0 For your future reference We recommend keeping a record of the fol lowing information to assist with any repair under warranty . Copy righ t: This material is c opyrighted by Panasonic Communications Co ., Ltd., and may be reproduced for internal use onl y .
An important point after buying a device Panasonic KX-TG8021BX (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Panasonic KX-TG8021BX yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Panasonic KX-TG8021BX - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Panasonic KX-TG8021BX you will learn all the available features of the product, as well as information on its operation. The information that you get Panasonic KX-TG8021BX will certainly help you make a decision on the purchase.
If you already are a holder of Panasonic KX-TG8021BX, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Panasonic KX-TG8021BX.
However, one of the most important roles played by the user manual is to help in solving problems with Panasonic KX-TG8021BX. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Panasonic KX-TG8021BX along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
