Instruction/ maintenance manual of the product KX WP1050 Panasonic
Go to page of 236
Please read these Operating Instructio ns before using the unit and save fo r future reference. For assistance, please visit http://www.p anasonic.com/help Charge the ha ndset battery for 6 hours before initial use.
T able of Contents 2 For assistance, please visit http://www.panasonic.com/help Introduction Feature highlights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Important safety inst ructions .
T able of Contents For assistance, please visit http://www.panasonic.com/help 3 Diverting calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 0 Skype Voicemail . . . . . . . . . . . .
T able of Contents 4 For assistance, please visit http://www.panasonic.com/help Reset button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 1 Setting your computer . . . . . . . . .
Introduction For assistance, please visit http://www.panasonic.com/help 5 Feature highlight s Thank you for purchas ing a Panasonic Wi-Fi Phone for Skyp e TM Executive Travel Set.
Introduction 6 For assistance, please visit http://www.panasonic.com/help How do the unit s work? The KX-WP1050 Wi-Fi Phone for Skype Executive Travel Set consists of the KX-WP A100 wireless handset and the KX-WP A102 wireless travel router (base unit) (router/wireless access point functioning).
Introduction For assistance, please visit http://www.panasonic.com/help 7 SkypeOut, SkypeIn and Skype V o icemail are optional services available from Skype. L For information about Skype, please visit the Skyp e homepage: http://www .skype.com/ L S pecifications are subjec t to change without notice.
Introduction 8 For assistance, please visit http://www.panasonic.com/help Import ant safety instructions When using the product, basic safety precautions should al ways be followed to reduce the risk of fire, electric sh ock, or personal injury . 1. Read all instructions carefully .
Introduction For assistance, please visit http://www.panasonic.com/help 9 15. Do not use the units on airplanes, in hospitals, or in other locations where wireless LAN signals may affect the operation of devices in the vicinity . L Abide by instructions regarding use in airplanes and hospi tals.
Introduction 10 For assistance, please visit http://www.panasonic.com/help If you have any problems: Please visit: http://www .panasonic.com/help No responsibility will be taken by our comp any with respect to consequences resu lting from the inappropria te use, dama ge or both of the unit.
Introduction For assistance, please visit http://www.panasonic.com/help 11 Security cautions When using this product, take appropriate measures to avoid the following security breaches.
Introduction 12 For assistance, please visit http://www.panasonic.com/help Countries permitted to use this product IMPORT ANT : Open Source Sof tware Parts of this product use Open Source Soft ware supplied based on the conditions of the Free Software Foundation’s GPLs and/or LGPLs and other condition s.
Introduction For assistance, please visit http://www.panasonic.com/help 13 For best perfor mance Base unit location/ avoiding noise: The base unit and other compatible Panasoni c units use radio waves to communicate w ith each other .
Introduction 14 For assistance, please visit http://www.panasonic.com/help Obstacles during Wireless Connectio n: The radio wave range may decrease depe nding on the surrounding environment or existence of obstacles.
Introduction For assistance, please visit http://www.panasonic.com/help 15 Accessory information Included accessori es AC adaptor for base unit .... .......... 1 pc. (Cord length: app rox. 1.83 m (6 f eet)) Order No. PQWEWP1050 AC cord *1 ........... .
Introduction 16 For assistance, please visit http://www.panasonic.com/help *1 Y ou might need a separate AC cord when you use this product in other co untries. See page 17 for details. The included AC cord is compatible with a power source up to 125 V AC.
Introduction For assistance, please visit http://www.panasonic.com/help 17 Additional/replacement accessories Changing the AC cord while traveling: Due to voltage difference, when you travel, be sure to carry the appropriate AC cord(s) designed for use in your destination countries.
Introduction 18 For assistance, please visit http://www.panasonic.com/help Controls Base unit (Wireless travel route r) Front view Rear view A LOCA TOR indicator B WIRELESS indica tor C LAN (Ethernet).
Introduction For assistance, please visit http://www.panasonic.com/help 19 Handset A Speaker B Headset jack C { { } (SEND) D {s} (SP-PHONE) E {*} / { A → a } (Character entry mode key) F CHARGE port.
Introduction 20 For assistance, please visit http://www.panasonic.com/help T o turn on/off the handset Press and hold { } } for 2 seconds to turn on or off the handset. Keypad lock: While in the Idle mode, press and hold { Me nu } (middle soft key) to lock the keypad.
Introduction For assistance, please visit http://www.panasonic.com/help 21 Right soft key N L Activate the functions indicated at the bottom right corner on the display . L While in th e Idle mode, press to sign in or connect to a network. Navigator key {^} L L Move up the cursor to select a menu item.
Introduction 22 For assistance, please visit http://www.panasonic.com/help CONTACTS Q L While in the Idle mode or in th e Main menu, press to access the cont act list (page 73). Alphanumeric keypad – L Enter numbers, characters, or symbol s when entering ch aracters.
Introduction For assistance, please visit http://www.panasonic.com/help 23 Base unit st atus indicators On different occasions you may notice that the status indicators on the base unit are flashing.
Introduction 24 For assistance, please visit http://www.panasonic.com/help WAN Green/ Amber A short blinking in Amber and a long flash in Green An Internet connection has been established usi ng the Temporary LAN side network settings. L During this time, Port Forwarding, DMZ, Packet Filtering and S tatic Routing features are disabled.
Introduction For assistance, please visit http://www.panasonic.com/help 25 Symbols and screen shots used in these operating instructions Symbols used for operations <Example> Sendi ng voicemail messages in Ma king/Answering Calls secti on on page 94.
Introduction 26 For assistance, please visit http://www.panasonic.com/help Screen shot s used for opera tions L Microsoft product screen shots are reprinted with permission from Microsoft Corporation. L The screen shots in these instructions are from Microsoft ® Windows ® XP using Internet Explorer ® 6.
Introduction For assistance, please visit http://www.panasonic.com/help 27 System requirement s Y our computer and netwo rk must meet the following technical spec ifications for the unit to work properly .
Getting S tarted 28 For assistance, please visit http://www.panasonic.com/help Setup flow Follow the procedures below to start using the unit. 1 Installing the base unit page 29 Select the appropriate setup procedure according to wh ere and how you w ant to use the unit.
Getting Started For assistance, please visit http://www.panasonic.com/help 29 Inst alling the base unit Y ou need to install the base un it before using this product. The installation methods differ depending on whether yo u are in a hotel room or at home.
Getting S tarted 30 For assistance, please visit http://www.panasonic.com/help While you are in a hotel room Y ou can use the handset while you are tra ve ling by accessing the Internet from a hotel room. The hotel you are staying in may give you sp ecific instructions as to what Internet connection mode you should sel ect.
Getting Started For assistance, please visit http://www.panasonic.com/help 31 3 Connect a separate Ethernet cable to the “LAN ” po rt on the base unit and the Ethernet (LAN) port on your computer. L Y ou can also connect your computer to t he base unit via wirele ss LAN connection.
Getting S tarted 32 For assistance, please visit http://www.panasonic.com/help While you are at home The base unit has 2 modes of operati on for use at home: AP (Bridge) mode and Router mode. AP (Bridge) mode: Designed for the case when you have an existing router or modem (DSL or cable) with a built-in router .
Getting Started For assistance, please visit http://www.panasonic.com/help 33 AP (Bridge) mode - With an EXISTI NG ROUTER or MODEM with a built-in ROUTER If you install the base unit with your existing router or mode m with a bu ilt-in router , the base unit should be set to AP (Bridge) mode.
Getting S tarted 34 For assistance, please visit http://www.panasonic.com/help 4 Connect a separate Ethernet cable to the “LAN ” po rt on the base unit and the Ethernet (LAN) port on your computer (the same Ethernet (LAN) port you have just unplugged the router from in step 2).
Getting Started For assistance, please visit http://www.panasonic.com/help 35 1 Switch the Mode selector to “HOME”. 2 Turn off your computer prope rly. Unplug yo ur cable or DSL modem’s powe r cord and leave the modem turned off for at least 10 minutes to clear its memory.
Getting S tarted 36 For assistance, please visit http://www.panasonic.com/help Setting up the base unit for the first time (Initialization Setup) For security purpose and enabl ing the Internet connectio n, it is necessary to set up the base unit at the very first time.
Getting Started For assistance, please visit http://www.panasonic.com/help 37 Initialization Setup flow Follow the procedures below to set up t he ba se unit for Internet connection. 1 Setting your login user name and pass word Set your user name and password to log in the base unit.
Getting S tarted 38 For assistance, please visit http://www.panasonic.com/help Initialization Setup 1 After the base unit installation (page 29 – 35) , turn on the computer you connected to the base unit’s “LAN” port. 2 Open the W eb browser. Enter http://192.
Getting Started For assistance, please visit http://www.panasonic.com/help 39 3 Enter the desired user name and password, then click [Save] . Important: L Please keep your u ser name and password secure. L The base unit begins restarting and a prompt screen with fields for your user name and password is displa yed.
Getting S tarted 40 For assistance, please visit http://www.panasonic.com/help 4 Enter the user name and password set in step 3. Then click [OK] . L T op Menu is displayed.
Getting Started For assistance, please visit http://www.panasonic.com/help 41 5 Click [Network Connectio n] on the Top Menu. L The current Internet connection settings a nd information of the wireless connectio n are displayed. 6 Click [New Profile] under th e New Profile heading.
Getting S tarted 42 For assistance, please visit http://www.panasonic.com/help 7 Select the desired connection mode used in the current mode (HOME o r HOTEL), then click [Next>] . When the Mode selector is set to “HOME”: L Internet connection modes vary according to the Internet service provider .
Getting Started For assistance, please visit http://www.panasonic.com/help 43 When the Mode selector is set to “HOTEL”: L Select the connection mode as specific instructions for t he Internet connection from the hotel. ( [AP (Bridge)] is not available in HOTEL mode.
Getting S tarted 44 For assistance, please visit http://www.panasonic.com/help L A screen with fiel ds for configuring the co nnection mode you select in this step is displayed.
Getting Started For assistance, please visit http://www.panasonic.com/help 45 8 Configure the sett ings, then click [Next>] . L See “Configuring the Internet connection settings” on page 48 for each setting.
Getting S tarted 46 For assistance, please visit http://www.panasonic.com/help 9 Confirm the settings yo u are about to save, then click [Save] . L The settings that you have just config ur ed are saved as profile No. 1 (HOME mode) or No. 2 (HOTEL mode) accordin g to the po sition of the Mode selector .
Getting Started For assistance, please visit http://www.panasonic.com/help 47 L If the Panasonic website is displayed, you have successfully connected to the Internet. L If you are in a hotel room, an authorization for the Internet access may be required .
Getting S tarted 48 For assistance, please visit http://www.panasonic.com/help Configuring the Intern et connection settings Configure the connection mode you select in t he Initialization Setup (in step 8 of page 45).
Getting Started For assistance, please visit http://www.panasonic.com/help 49 St atic Configuration: Allo ws the base unit to assign a specific IP address. [Host Name] L If you have the host name assigned by your Internet servi ce provider or the hotel you are staying in, enter host name (1 – 31 characters) in this data field.
Getting S tarted 50 For assistance, please visit http://www.panasonic.com/help Setting Description [IP Address] L Enter the IP address and subnet mask assigned b y your Internet service provi der or t he hotel you are staying in in each data field. L Set 4 numbers (0 – 2 55) separated by periods such as “192.
Getting Started For assistance, please visit http://www.panasonic.com/help 51 PPPoE Configuration: (Point to Point Protocol over Ethernet) Allows the base unit to receive an IP address from a PPPoE server .
Getting S tarted 52 For assistance, please visit http://www.panasonic.com/help AP Configura tion: Allows the base unit to work as an access point when you have a router at home.
Getting Started For assistance, please visit http://www.panasonic.com/help 53 Setting Description [Connection Mo de] L Select [AP-DH CP] for Connection Mode if the DH CP server is operating in the router or modem with a built-in router you are using. Select [AP-Stat ic] if you want to assign S tatic IP address.
Getting S tarted 54 For assistance, please visit http://www.panasonic.com/help T roubleshooting for installation If problems occur while installing the base unit, you can refer to th e check list below . For up-to-date support information, visit http://www .
Getting Started For assistance, please visit http://www.panasonic.com/help 55 Initialization Setup: Problem Soluti on Initialization Setup is not displayed. L Dialog boxes ma y not be d isplayed immedia tely due to the state of the LAN. L Check that the LAN or WI RELESS indicator lights in green.
Getting S tarted 56 For assistance, please visit http://www.panasonic.com/help Internet access: Problem Soluti on I cannot connect to the Internet . L Check the modem connection.
Getting Started For assistance, please visit http://www.panasonic.com/help 57 Setting up the handset Battery inst allation/replacement 1 Press the notch of the handset cover firmly, an d slide it in the direction of the arrow. L For replacement, remove the ol d battery .
Getting S tarted 58 For assistance, please visit http://www.panasonic.com/help Battery charge Connect the included charge cable to the CHARG E port o f the handse t. Connect the o ther end to the CHARGE port of the base unit that is connected to the power supply .
Getting Started For assistance, please visit http://www.panasonic.com/help 59 Battery level: Note: L When the battery needs to be charged, the hand set beeps intermittently during a call or a voicemail.
Getting S tarted 60 For assistance, please visit http://www.panasonic.com/help T ext entry The dial keys are used to enter characters and numbers. Each d ial key has multiple characters assigned to it. Use the character table (page 62) and symbol table (page 62) for reference when you enter characters or numbers.
Getting Started For assistance, please visit http://www.panasonic.com/help 61 Basic operation – T o move the cursor , press { < } or { > } . – Press dial keys to enter characters and numbers.
Getting S tarted 62 For assistance, please visit http://www.panasonic.com/help Character t able *1 V alid depending on the text entry screen. Symbol t able Note: L The available symbols differ depending on the text entry screen.
Getting Started For assistance, please visit http://www.panasonic.com/help 63 T urning on the handset (Signing in to Skype) T o use the handset, you need a Skype account and need to connect to a network and sign in to Skype. If you do not have a Skype a ccount, you can create it using the hand set (page 65).
Getting S tarted 64 For assistance, please visit http://www.panasonic.com/help St arting up for the second time 1 Press and hold { } } for 2 seconds to turn on the handset.
Getting Started For assistance, please visit http://www.panasonic.com/help 65 Creating a new account If you do not have a Skype account, or want to create another account, select “ Create new accoun.
Getting S tarted 66 For assistance, please visit http://www.panasonic.com/help Handset displays Idle screen Skype online status (page 68) 2 Skype credit balance Handset status icons (page 67) 1 Current time 4 Message field 3 Soft key functions 1 Current time: Current time represents currently set time on the handset.
Getting Started For assistance, please visit http://www.panasonic.com/help 67 Handset st atus icons *1 Th ese icons appear from the left in order of priority . Icon Meaning In range of the wireless LAN Handset has no link to the wireless LAN. Battery level and status (page 59) Speakerphone is on .
Getting S tarted 68 For assistance, please visit http://www.panasonic.com/help Skype online st atus Skype online status in the Idle screen: Skype online status in the Idle screen repr esents your current Skype online status. Note: L Y ou can chan ge your Skype online status .
Getting Started For assistance, please visit http://www.panasonic.com/help 69 Main menu Skype’s Main menu provides 7 menus as shown bel ow . 1 While in the Idle mode, press { Menu } (middle soft key).
Getting S tarted 70 For assistance, please visit http://www.panasonic.com/help *1 Available only when you are signed in to Skype. Settings Configure handset settings. Network : Search for networks, manage preferred networks list, and set auto-co nnection to open networks.
Getting Started For assistance, please visit http://www.panasonic.com/help 71 Idle mode option screen The Idle mode option screen is anothe r main menu that provides different functions such as turning the silent mode on or off, viewing the list of networks, changing your profile details, Skype online status, and signing out of Skype.
Getting S tarted 72 For assistance, please visit http://www.panasonic.com/help Setting the time and date Set the correct time and date before you star t using the handset. The time zone and the daylight saving need to be set first before setting the time.
Managing Contacts For assistance, please visit http://www.panasonic.com/help 73 Cont act list Y our contact list displays all of the display names you can make calls to. If you have an existing Skype account, your contact list is automati cally downloaded wh en you sign i n.
Managing Contacts 74 For assistance, please visit http://www.panasonic.com/help L In step 2, the quick filter is available for searching a contact’s name. – Enter initial or a starting part of a name. When the en tered character(s) match a contact’s name as initial or a st arting part , the name is listed as a candidate.
Managing Contacts For assistance, please visit http://www.panasonic.com/help 75 Skype status icons in cont act list: Skype status icons represent the current Skype online status of the contacts in contact list. Icon Status Online: Indicates that the contact is signed in to Skype and currently online.
Managing Contacts 76 For assistance, please visit http://www.panasonic.com/help Adding cont act s Y ou can add up to 500 contacts to your contact list. Adding Skype cont act s 1 { Menu } (middle soft key) 2 “ Add contact ” i { Select } 3 “ Skype ” i { OK } 4 Enter the Skype name (max.
Managing Contacts For assistance, please visit http://www.panasonic.com/help 77 Adding SkypeOut numbers Y ou can add non-Skype (SkypeOut) numbers to your contact list.
Managing Contacts 78 For assistance, please visit http://www.panasonic.com/help Searching for Skype cont act s Y ou can search the Skype directory for your des ired Skype contacts over the Internet so that you can call, a dd to your co ntact lis t, or view the profil es of the cont acts.
Managing Contacts For assistance, please visit http://www.panasonic.com/help 79 Removing cont acts Y ou can remove contacts from contact list. 1 While in the Idle mode, press { CONTACTS } . 2 Select the desired contact. i { Options } 3 “ Remove ” i { Select } 4 Select “ Remove and block ” or “ Remove only ”.
Managing Contacts 80 For assistance, please visit http://www.panasonic.com/help Cont act list options Y ou can access the optio n menu while viewing the contact list. 1 While in the Idle mode, press { CONTACTS } . 2 Select the desired contact. i { Options } 3 Select the desire d option.
Managing Contacts For assistance, please visit http://www.panasonic.com/help 81 V iewing a cont act profile Y ou can view the profil e of the cont act you select. 1 While in the Idle mode, press { CONTACTS } . 2 Select the desired contact. i { View } Note: L In step 1, you can also press { Menu } (middle sof t key).
Managing Contacts 82 For assistance, please visit http://www.panasonic.com/help Blocking cont act s Blocking cont act s Y ou can block contacts that you do not wish to receive calls from in your contact list. 1 While in the Idle mode, press { CONTACTS } .
Making/Answering Calls For assistance, please visit http://www.panasonic.com/help 83 Making calls Y ou can ma ke calls to the Skyp e users (Skype- to-Skype calls) for free. Y ou can also make calls to landlines and mobile phones (SkypeOut ca lls). T o make SkypeOut calls, you must have Skype credit.
Making/Answering Calls 84 For assistance, please visit http://www.panasonic.com/help 6 { { } L T o make a call u sing the speakerphone, p ress {s} . 7 When you are finished talking, press { } } . Note: L In step 1, you can also press { Menu } (middle soft key).
Making/Answering Calls For assistance, please visit http://www.panasonic.com/help 85 Example (using the country code “1” for calling USA): + 1 555 321 5555 L “+” (international prefix) is automatically added. L For some countries, you may need to excl ude “0” at the beginn ing of the area code.
Making/Answering Calls 86 For assistance, please visit http://www.panasonic.com/help Answering calls When a call is being received, the handset ri ngs and the ringer indicator on the handset flashes rapidly . 1 Press { { } or {s} . 2 When you are finished talking, press { } } .
Making/Answering Calls For assistance, please visit http://www.panasonic.com/help 87 Conference Y ou can recei ve a conference call that enables you ha ve a conversation with more than 1 person at a same time. When a conference call is being rece ived, the title at the to p of the screen shows “ Conference ”.
Making/Answering Calls 88 For assistance, please visit http://www.panasonic.com/help Useful features during a call Using the speakerphone 1 During a conversation, press {s} . 2 When you are finished talking, press { } } . Note: L Use the speakerp hone in a quiet en vironment.
Making/Answering Calls For assistance, please visit http://www.panasonic.com/help 89 T o answer 2nd ca ll: 1 Press { Answer } to answer 2nd call. L 1st caller i s automati cally held. 2 When you are finished talking with 2nd caller, press { } } . T o reject 2nd call: While 2nd caller is calling, press { Reject } .
Making/Answering Calls 90 For assistance, please visit http://www.panasonic.com/help Diverting calls This featur e diverts incomi ng ca lls to the voicemail box or another forward numbe r (phone number/Skype name) that has been registered as call divert destination when you cannot answer a call or when you are offline.
Making/Answering Calls For assistance, please visit http://www.panasonic.com/help 91 Diverting to voicemail box: V oicemail is an automatic answering service offered by Skype. After you subscribe to this service, the Skype V oicemail system will answ er calls for you when you are offline or unavailable to answer the phone.
Making/Answering Calls 92 For assistance, please visit http://www.panasonic.com/help T o record a new welcome messa ge: 1 { Menu } (middle soft key) 2 “ Settings ” i { Select } 3 “ Call divert ” i { Select } 4 “ Welcome message ” i { Select } 5 { Options } 6 “ Record new ” i { Select } 7 Record your message after the beep (max.
Making/Answering Calls For assistance, please visit http://www.panasonic.com/help 93 Skype V oicemail Y ou can receive voicemai l messages from users who subscribe to Skype V oi cemail service. Y ou can also send voicemail messa ges to them. If you subscribe to this service, you can s end or receive voicemails regardless of user ’s subscription.
Making/Answering Calls 94 For assistance, please visit http://www.panasonic.com/help “ ” indicates a voicemail that you have already played back in the vo icemails list. Sending voicemail messages Y ou can send voicemai l messages using your contact list or History .
Managing History For assistance, please visit http://www.panasonic.com/help 95 History The following events are logged in the “ History ” menu: 50 missed call s, 20 incoming calls, 20 outgoing calls, 100 voicemails an d 20 au thorization requests.
Managing History 96 For assistance, please visit http://www.panasonic.com/help Note: L In step 1, you can also press { { } to access the outgoing calls list while in the idle mode, then skip to step 4. L In step 1, you can also press { Vie w } to access the missed call s list while a new missed calls notification is di splayed, then skip to step 4.
Managing History For assistance, please visit http://www.panasonic.com/help 97 *1 Available only while viewing the log *2 Available only while viewing details of the log *3 Either is displayed depending on the contact.
Managing History 98 For assistance, please visit http://www.panasonic.com/help 6 Read the authorization re quest message. i { Options } 7 Select “ Accept ” or “ Decline ” i { Select } Accept Accept the authorization request from the contact. Decline Decline the authorization request from the contact.
Notifications For assistance, please visit http://www.panasonic.com/help 99 Notification screen Notification screen appears to notify you of some specific e vents. Y ou need to read the full message shown on each notifi cation screen and fo llow the instruction if necessary .
Notifications 100 For assistance, please visit http://www.panasonic.com/help New voicemails notification This notification appears when yo u receive a new voicemail. L T o view the voicemail log, press { Vi ew } . L If you view it later , press { Cancel } .
Notifications For assistance, please visit http://www.panasonic.com/help 101 New available sof tware notification These screens appear when there is new avail able software. L T o update the software, press { OK } . L If you update it later , pre ss { Cancel } Note: L For updating the software, see page 1 18 for details.
Notifications 102 For assistance, please visit http://www.panasonic.com/help contact list can not be stored on Skype servers. If you sign in again, these changes disappear . L If you want to resume the synchronization between you r handset and Skype servers, you need to reduce contacts to less than 500 by using computer installed Skype software.
Personal Skype Online S tatus and Setting s For assistance, please visit http://www.panasonic.com/help 103 Personal Skype online st atus and profile Skype online status and profile features allow you to de fine your Skype online status and personal profile details, and to sign out of Skype.
Personal Skype Online S tatus and Settin gs 104 For assistance, please visit http://www.panasonic.com/help 4 Fill in the fields or select the desired item. i { OK } / { Select } Important: L Do not enter the info rmation that you d o not want to be shown to the public .
Personal Skype Online S tatus and Setting s For assistance, please visit http://www.panasonic.com/help 105 Personal Skype settings Personal Skype settings a llow you to define yo ur password, and ensure your privacy by restricting incoming calls to only specified types of calls.
Personal Skype Online S tatus and Settin gs 106 For assistance, please visit http://www.panasonic.com/help Privacy settings This featu re allows you to re strict incoming calls to only those from specifi ed types of callers.
Handset Wireless Network Connection and Settings For assistance, please visit http://www.panasonic.com/help 107 Wireless network connection When you turn on the handset, it searches fo r available wireless networks in range.
Handset Wireless Ne twork Connection and Settings 108 For assistance, please visit http://www.panasonic.com/help Find wireless networks Y ou can search for available wireless netwo rks in range. 1 While in the Idle mode, press { Options } . 2 “ View networks ” i { Select } L Wireless networks in ra nge are displayed.
Handset Wireless Network Connection and Settings For assistance, please visit http://www.panasonic.com/help 109 2 “ View networks ” i { Select } L Wireless networks in ra nge are displayed. 3 Select the desired network. i { Connect } L When you select an open network, skip to step 6.
Handset Wireless Ne twork Connection and Settings 110 For assistance, please visit http://www.panasonic.com/help T o connect to a wire less network that is not foun d in range: Some networks do not broadcast their network name (SSID), and you can no t find these networks in range.
Handset Wireless Network Connection and Settings For assistance, please visit http://www.panasonic.com/help 111 T o connect to a wir eless network while “ No connection ” is displayed: When “ No connection ” message is displayed in the Idle screen, the handset is not connected to any network.
Handset Wireless Ne twork Connection and Settings 112 For assistance, please visit http://www.panasonic.com/help Wireless network settings This feature allows you to set the handset to connect to wireless networks. Networks in range See “Find wireless n etworks” on page 108.
Handset Wireless Network Connection and Settings For assistance, please visit http://www.panasonic.com/help 113 Network settings except fo r the base unit: Note: L For the base unit, 2 network settings TCP IP (HOME) and TCP IP (HOTEL) are available.
Handset Wireless Ne twork Connection and Settings 114 For assistance, please visit http://www.panasonic.com/help Network settings except fo r the base unit: Network name Enter the network name containing between 1 and 32 characters.
Handset Wireless Network Connection and Settings For assistance, please visit http://www.panasonic.com/help 115 Note: L In step 5, you can also select the desired network.
Handset Wireless Ne twork Connection and Settings 116 For assistance, please visit http://www.panasonic.com/help 2 “ Settings ” i { Select } 3 “ Network ” i { Select } 4 “ Preferred networks ” i { Select } 5 Select the desired network.
Handset Wireless Network Connection and Settings For assistance, please visit http://www.panasonic.com/help 117 4 “ Auto-connect ” i { Select } 5 Select “ Yes ” or “ No ” to decide whether you wan t to auto-connect to open networks.
Handset Settings 118 For assistance, please visit http://www.panasonic.com/help General settings Change p assword See “Changing your password” on page 105. Auto sign in Auto sign in allows you to sign in to Skype automatically when the handset is starting up.
Handset Settings For assistance, please visit http://www.panasonic.com/help 119 6 Plug the charge cable into the handset and the base unit for battery charging (page 5 8) if the battery is not fully cha rged. i { OK } L The handset starts to download the Skype application .
Handset Settings 120 For assistance, please visit http://www.panasonic.com/help 7 Read the entire Skype agreement. i { Ye s } 8 Computer: Start up the Web browser on the computer you connected to the LAN port on the base unit.
Handset Settings For assistance, please visit http://www.panasonic.com/help 121 9 Computer: Enter the URL displayed on the handset in the ad dress field of your browser and press ENTER key. L Y ou nee d to enter both IP address and port number (e.g. http://192.
Handset Settings 122 For assistance, please visit http://www.panasonic.com/help 14 Computer: Click [OK] in the confirma tion dialog bo x. L The handset starts to update. After an update is completed, th e handset begins to restart. Note: L When “ A new version of firmwar e is available.
Handset Settings For assistance, please visit http://www.panasonic.com/help 123 T o receive software update notifications: Y ou can allow the han dset to no tify you of software updates.
Handset Settings 124 For assistance, please visit http://www.panasonic.com/help To n e s Y ou can change the handset’s ringer type , tone, volume, and other types of tones. 1 { Menu } (middle soft key) 2 “ Settings ” i { Select } 3 “ Tones ” i { Select } 4 Select the desired setting.
Handset Settings For assistance, please visit http://www.panasonic.com/help 125 Phone settings Register the handset See “Registering the handset” on page 133.
Handset Settings 126 For assistance, please visit http://www.panasonic.com/help Handset Information This feature shows device information such as product ID, software/firmware versi on and MAC address. 1 { Menu } (middle soft key) 2 “ Settings ” i { Select } 3 “ Information ” i { Select } WP1050.
Handset Settings For assistance, please visit http://www.panasonic.com/help 127 Advanced settings Sof tware up date See “T o receive software update notifications” on page 123. Network proxy Network proxy allows you to decide whether you want to u se proxy servers on the LAN for Skype traffic.
Handset Settings 128 For assistance, please visit http://www.panasonic.com/help 6 Enter the information. i Press { OK } or select the desired item. i { Select } 7 { Save } 8 { OK } Note: L For text entry , see page 60 for details. L The new settin gs will become e ffective after restarting the handset.
Handset Settings For assistance, please visit http://www.panasonic.com/help 129 Recovering the handset When software/firmware of handset is defect ive, you are required to update a software/ firmware. 1 This error message appe ars when the hands et so ftware/firmware may be defective.
Handset Settings 130 For assistance, please visit http://www.panasonic.com/help 3 After a network connection is completed, follow the same step as software/firmware update. To update the Skype application: Skip to step 6 on p age 118. To update the Panasonic firmwa re: Skip to step 6 on page 119.
Services For assistance, please visit http://www.panasonic.com/help 131 Service information Y ou can view information ab out the following optional services by Skype: Skype credit, SkypeIn and Skype V oicemail. Note: L SkypeIn numbers are regular phone numbers sold on a su bscription basis.
Handset Locator and Registration 132 For assistance, please visit http://www.panasonic.com/help Locating the handset Y ou can locate the misplaced handse t by paging it from the base unit. 1 Base unit: Press the LOCATOR button to p age the handset. L The LOCA TOR indicator on the base unit lights up.
Handset Locator and Registration For assistance, please visit http://www.panasonic.com/help 133 Registering the handset The handset and the base uni t are preregistered.
Base Unit Settings 134 For assistance, please visit http://www.panasonic.com/help Setting the base unit from T op Menu After the settings in Initialization Setup (page 36) are successfully completed, T op Menu will be displayed on the top page each time you log in the base unit.
Base Unit Settings For assistance, please visit http://www.panasonic.com/help 135 3 Enter the user name and password you set in Initialization Setu p. L T op Menu is displayed. 1 Current mode: Indicate the current selected mode. The mode is determined by the position of the Mode selecto r switch (page 200).
Base Unit Settings 136 For assistance, please visit http://www.panasonic.com/help Network Connection Creating a new Internet connection profile 1 Click [Network Connectio n] on the Top Menu. L The current Internet connection settings a nd information of the wireless connectio n are displayed.
Base Unit Settings For assistance, please visit http://www.panasonic.com/help 137 3 Select the connection mode, then click [Next>] . 4 Configure the connectio n mode you select in step 3, then click [Next>] . L See “Configuring the Internet connection settings” on p age 48 for instructions.
Base Unit Settings 138 For assistance, please visit http://www.panasonic.com/help 3 Select the profile you wish to modify from the pull-down menu under the Select Profile heading, then click [Edit] . 4 Configure the connectio n mode of the prof ile you sele ct in step 3, then click [Next>] .
Base Unit Settings For assistance, please visit http://www.panasonic.com/help 139 Modifying the wireless information 1 Click [Network Connectio n] on the Top Menu. 2 Click [Modify] under the Wireless Information heading. 3 Configure the wireless connection basic settings, then click [Next>] .
Base Unit Settings 140 For assistance, please visit http://www.panasonic.com/help 5 Click [Restart] . L The base unit automatically restar ts and the T op Menu is displayed. Note: L The settings under the Netwo rk Connection headi ng display the network i nformation for the Internet connection on W AN side.
Base Unit Settings For assistance, please visit http://www.panasonic.com/help 141 Up dating the firmware (Base Unit) T o prevent the leaking of customer informa tion, illegal operation of thi s product, interference or involuntary shutdown et c., we recommend you update the firmware regularly .
Base Unit Settings 142 For assistance, please visit http://www.panasonic.com/help WP1050.book Page 142 Wednesd ay, November 22, 2006 9:24 AM.
Base Unit Settings For assistance, please visit http://www.panasonic.com/help 143 Advanced Setup 1 Click [Advanced Setup] on the Top Menu. 1 Ta b L Basic: Display the setting pages for the Internet co nnection profile. L Advanced: Display the setting pages for the loca l network configuration, security, and routing.
Base Unit Settings 144 For assistance, please visit http://www.panasonic.com/help 2 Click the desired tab, then click the desired item from the menu on the left side. 2 Menu Menu items contained in the selected T ab are shown. 3 Sub menu 1 Sub menu 1 is shown as the heading title on the Menu page.
Base Unit Settings For assistance, please visit http://www.panasonic.com/help 145 Wireless Wireless Basic Wireless Mode – 168 SSID – Wireless Security Security Mode – 170 WEP Settings – WPA-PS.
Base Unit Settings 146 For assistance, please visit http://www.panasonic.com/help *1 Whi le in AP (Bridge) mode, Interface S tat us is displayed instead of W AN Interface S tatus and L AN Interface S tatus. *2 While in AP (Bridge) mode, these menus are not availabl e.
Base Unit Settings For assistance, please visit http://www.panasonic.com/help 147 Basic settings Internet Connec tion: This feature allows you to select and configure the Internet connectio n mode. Y ou can add, modify , and delete the In ternet connection profi le.
Base Unit Settings 148 For assistance, please visit http://www.panasonic.com/help 3 To add a new e ntry, click the entry number with blank fields under the Profi les heading. L The Connection Mo de page is displayed. 4 Click the desired Internet connection mode under the Mode column.
Base Unit Settings For assistance, please visit http://www.panasonic.com/help 149 Note: L T o change the pro file: 1 Click the pull-down menu and select th e des ired profile under the Profile Selection heading in step 3. 2 Click [Save] . 3 Click [Restart] .
Base Unit Settings 150 For assistance, please visit http://www.panasonic.com/help MAC Addr ess Clone: This feature allows you to clone the MAC (Media Access Control) address of your computer ’s network adaptor onto this product. A MAC address is a 12-digi t code assigned to a u nique piece of hardware for identification.
Base Unit Settings For assistance, please visit http://www.panasonic.com/help 151 3 Configure the sett ings, then click [Save] . 4 Click [Restart] . L The base unit automatically restar ts and the T op Menu is displayed. Setting Description [MAC Address Clone] L Select w hether to enable or di sable the MAC address clone feature.
Base Unit Settings 152 For assistance, please visit http://www.panasonic.com/help Advanced settings LAN/DHCP Server: This feature allows you to config ure the lo cal network settings a nd DHCP server setting s. 1 Click [Advanced Setup] on the Top Menu.
Base Unit Settings For assistance, please visit http://www.panasonic.com/help 153 3 Configure the sett ings, then click [Save] . 4 Click [Restart] . L The base unit automatically restar ts and the T op Menu is displayed. Note: L If you change the LAN network settings o r DHCP server settings, the entries in the S tatic DHCP table will be deleted.
Base Unit Settings 154 For assistance, please visit http://www.panasonic.com/help St atic DHCP (IP Address Reservation): The S tatic DHCP function allows you to stabiliz e th e IP address assigned to th e computer by registering the computer ’s MAC address.
Base Unit Settings For assistance, please visit http://www.panasonic.com/help 155 Note: L T o edit the settings: 1 Click the desired entry number under the stat ic DHCP setting, cli ck the desired entry number under the Static DHCP (IP Addr ess Reservation) heading in LAN/D HCP Server page (page 152 ).
Base Unit Settings 156 For assistance, please visit http://www.panasonic.com/help 2 Click the [Advanced] tab, then click [Port Forwardi ng] . 3 To add a new entry, click [Add] under the Port Forwar ding Table heading .
Base Unit Settings For assistance, please visit http://www.panasonic.com/help 157 4 Configure the settings u nder the Port Forwarding Setting heading. Click [Add] to add a new entry. 5 Click [Restart] . L The base unit automatically restar ts and the T op Menu is displayed.
Base Unit Settings 158 For assistance, please visit http://www.panasonic.com/help L This feature is not available in AP (Bridge) mode. DMZ: This feature allows you to co nfigure the DM Z (DeMilitarized Zone) settin gs. Enable DMZ to expose a specified computer on your LAN to the Internet.
Base Unit Settings For assistance, please visit http://www.panasonic.com/help 159 UPnP: This feature allows you to configure the U PnP (Universal Plug and Play) settings. Enabling UPnP allows the base unit to be compliant with the UPnP standard. 1 Click [Advanced Setup] on the Top Menu.
Base Unit Settings 160 For assistance, please visit http://www.panasonic.com/help Easy Security: This feature allows you to easily set up packet filtering. 1 Click [Advanced Setup] on the Top Menu. 2 Click the [Advanced] tab, then click [Easy Security] .
Base Unit Settings For assistance, please visit http://www.panasonic.com/help 161 3 Configure the sett ings, then click [Save] . L Check the box in the Log Output column to create a log of each action. L If you select [Enable] and check “Log Output”, the log will be output.
Base Unit Settings 162 For assistance, please visit http://www.panasonic.com/help Packet Filtering: This feature allows you to config ure the packet filtering settings, and to control the packets to be received/transmitted between the In ternet and the computers on yo ur LAN.
Base Unit Settings For assistance, please visit http://www.panasonic.com/help 163 3 To add a new entry, click [Add] under the Packet Filtering Table heading.
Base Unit Settings 164 For assistance, please visit http://www.panasonic.com/help 4 Configure the settings unde r the Packet Filtering Setti ng heading, then click [Add] to add the new entry. Setting Description [No.] L Select the desired entry number for the packet filtering setting.
Base Unit Settings For assistance, please visit http://www.panasonic.com/help 165 *1 When direction is W i L, Source IP ‘local’ is Inval id. When direction is L i W, Destination IP ‘local’ is invalid. 5 Click [Restart] . L The base unit automatically restar ts and the T op Menu is displayed.
Base Unit Settings 166 For assistance, please visit http://www.panasonic.com/help Routing: This feature allows you to set static routi ng between the base unit and ano ther network. Use this feat ure when you have several local networks. Up to 4 settings can b e registered.
Base Unit Settings For assistance, please visit http://www.panasonic.com/help 167 4 Configure the settings under the R outing Setting heading, then click [Add] to add a ne w entry. 5 Click [Restart] . L The base unit automatically restar ts and the T op Menu is displayed.
Base Unit Settings 168 For assistance, please visit http://www.panasonic.com/help Wire le ss Wireless Basic: This feature allows you to set the wireless mode and network name (SSID: Service Set IDentifier). 1 Click [Advanced Setup] on the Top Menu. 2 Click the [Wireless] tab, then click [Wireless Basic] .
Base Unit Settings For assistance, please visit http://www.panasonic.com/help 169 3 Configure the sett ings, then click [Save] . 4 Click [Restart] . L The base unit automatically restar ts and the T op Menu is displayed. Note: L Y ou need to registe r the handset to the base unit again when you change the n etwork name (SSID).
Base Unit Settings 170 For assistance, please visit http://www.panasonic.com/help Wireless Security: This feature allows you to set security measure s for connecting to wireless LAN. 1 Click [Advanced Setup] on the Top Menu. 2 Click the [Wireless] tab, then click [Wireless Secur ity] .
Base Unit Settings For assistance, please visit http://www.panasonic.com/help 171 3 Configure the sett ings, then click [Save] . 4 Click [Restart] . L The base unit automatically restar ts and the T op Menu is displayed. Setting Description [Security Mode] L Select the desired securi ty mode.
Base Unit Settings 172 For assistance, please visit http://www.panasonic.com/help Note: L Y ou need to registe r the handset to the base unit again when you change the se curity mode, the network key and/or the key index. See “Registering the hand set” on page 133.
Base Unit Settings For assistance, please visit http://www.panasonic.com/help 173 3 Configure the setting, then click [Save] . 4 Click [Restart] . L The base unit automatically restar ts and the T op Menu is displayed. T o configur e MAC address filtering entry: 1 Click [Advanced Setup] on the Top Menu.
Base Unit Settings 174 For assistance, please visit http://www.panasonic.com/help 4 Configure the setting, and th en click [Add] . 5 Click [Restart] . L The base unit automatically restar ts and the T op Menu is displayed. Note: L T o edit the setting: 1 Click the desired en try number.
Base Unit Settings For assistance, please visit http://www.panasonic.com/help 175 Statu s The status pages allow you to view the st atus of the base unit. The information disp layed on the pages are useful when con tacting an authorized servicenter . 1 Click [Advanced Setup] on the Top Menu.
Base Unit Settings 176 For assistance, please visit http://www.panasonic.com/help W AN In terface St atus: 1 MAC Address: Show the MAC address of the WAN port. 2 Connection Mode: Show the Inte rnet connection mode. (DHCP/ PPPoE/AP/Static) 3 Connection Status: Show whether the WAN port is con necting to the Internet or not.
Base Unit Settings For assistance, please visit http://www.panasonic.com/help 177 [DHCP Lease T able] shows the DHCP server status and lease table. DHCP Server Status: 1 DHCP Server: Show whether the DHC P server featu re is enabled or not. 2 DNS Server: Show the IP address of the DNS server.
Base Unit Settings 178 For assistance, please visit http://www.panasonic.com/help [UPnP Port Ma pping T able] shows the UPnP status and port mapping t able.
Base Unit Settings For assistance, please visit http://www.panasonic.com/help 179 [Wireless St atus] shows the wireless LAN status. Wireless St atus: 1 Mode: Show 802.11b or 802.11b/g. 2 SSID: Show the network na me. 3 Channel: Show wireless data chan nel.
Base Unit Settings 180 For assistance, please visit http://www.panasonic.com/help [Handset S t atus] shows the handset connection status. Note: L It may take a while to display this screen in order to check if the handset is connected. Handset St atus: 1 Connection: Show the status of the handset registration and connection to the base unit.
Base Unit Settings For assistance, please visit http://www.panasonic.com/help 181 [V ersion Information] shows the firmw are version and configuration database version. [Save St atus] allows you to save the current status of the base unit to a co mputer you are using.
Base Unit Settings 182 For assistance, please visit http://www.panasonic.com/help Maintenance Password: This feature allows you to change the us er name and password that are required to access the base unit. Important: L Make a note o f the user name an d passw ord so that you will not forget them.
Base Unit Settings For assistance, please visit http://www.panasonic.com/help 183 3 Configure the sett ings, then click [Save] . 4 Click [Restart] . L The base unit automatically restar ts and the T op Menu is displayed. Setting Description [User Name] L T he user name and password can contain 6 to 15 alphanumeric cha racters.
Base Unit Settings 184 For assistance, please visit http://www.panasonic.com/help Update Firmwa re: This feature allows you to update the firmware of the base unit to the latest version. T o prevent the leaking of customer informa tion, illegal operation of thi s product, interference or involuntary shutdown et c.
Base Unit Settings For assistance, please visit http://www.panasonic.com/help 185 7 Click [OK] in the confirmation dialog box. L The base unit automatically restar ts after the firmware is updated.
Base Unit Settings 186 For assistance, please visit http://www.panasonic.com/help Reset to Factory Default: The base unit settings can be reset to the base unit’s factory default. See page 201 for the default settings. 1 Click [Advanced Setup] on the Top Menu.
Base Unit Settings For assistance, please visit http://www.panasonic.com/help 187 Save Settings: A backup file can be saved on your computer . Y ou can load the b ase unit settings from the backup file on th e Load Settings page (page 188). 1 Click [Advanced Setup] on the Top Menu.
Base Unit Settings 188 For assistance, please visit http://www.panasonic.com/help Load Settings: The base unit settings ca n be loaded from a back up file. If you reset the base unit settings to factory default, the Load Settings page c an load its settings from the backup file.
Base Unit Settings For assistance, please visit http://www.panasonic.com/help 189 Restart: Y ou can restart the base unit. 1 Click [Advanced Setup] on the Top Menu. 2 Click the [Maintenan ce] tab, then click [Restart] . 3 Click [Restart] . L The confir mation mess age is di splayed.
Base Unit Settings 190 For assistance, please visit http://www.panasonic.com/help Packet Filtering Lo g: This feature displays the packet filtering logs tha t are temporarily saved, and saves the logs to your computer .
Base Unit Settings For assistance, please visit http://www.panasonic.com/help 191 UPnP Port Mapping Log: This feature displays th e temporarily saved lo gs of po rt mapping additions, dele tions and failures. It also saves the logs to y our computer .
Base Unit Settings 192 For assistance, please visit http://www.panasonic.com/help Connection Log: This feature displays the temporarily sa ved Internet connection logs, such a s disconnection and authentication logs for PPPoE and DHCP connections. It also saves the logs to your computer.
Base Unit Settings For assistance, please visit http://www.panasonic.com/help 193 Support Help: The Help page describes the feat ures of each of the following: 1. Initial Setup 2. T op Menu 3. Network Connection 4. Update Firmware 5. Advanced Setup Basic Advanced Wireless St a t u s Maintenance Support 6.
Base Unit Settings 194 For assistance, please visit http://www.panasonic.com/help Support Link: This feature allows you to get product and support information from the Internet. 1 Click [Advanced Setup] on the Top Menu. 2 Click the [Support] tab, then click [Support Link] .
Base Unit Settings For assistance, please visit http://www.panasonic.com/help 195 Handset Information This feature displays the registered handset’s wire less connection status to the base unit. It also displays the handse t’s MAC address a nd IP ad dress when connected to the base unit.
Base Unit Settings 196 For assistance, please visit http://www.panasonic.com/help T emporary LAN Side Networ k Setting when networks on the W AN side and the LAN side overlap When networks on the WA N side and the LAN side overlap, the conne ction to the W AN side of the base unit is termin ated.
Base Unit Settings For assistance, please visit http://www.panasonic.com/help 197 L IP address and Subnet Mask unde r the W AN heading show the current WAN side settings of the base unit. L IP address, Subnet mask and S tarting IP address (DHCP Server) under the LAN (settings) heading show the current LAN side settings of the base unit.
Base Unit Settings 198 For assistance, please visit http://www.panasonic.com/help 3 Change the network setting on your computer. L If DHCP is enabled for obtaining IP address on yo ur computer , you n eed to obtain IP address again.
Base Unit Settings For assistance, please visit http://www.panasonic.com/help 199 Downloading the version-u p firmware to your computer for recover ing the base unit When th e W AN Ind icator is f lashing in amber , the firmware of the base unit is defective and the base unit is operating in recove ry mode.
Base Unit Settings 200 For assistance, please visit http://www.panasonic.com/help Mode selector Once you have crea ted a new p rofile in the Initialization Setup (page 36), or added/edi ted profiles (page 136, 147) in the base unit settings , you do not need to log in the base unit each time.
Base Unit Settings For assistance, please visit http://www.panasonic.com/help 201 Reset button If you forget the use r name and password fo r the base un it, press and hold the “F ACTOR Y DEF AUL T RESET” button on the bo ttom of the base unit with a poi nted object until all the indicators go out.
Base Unit Settings 202 For assistance, please visit http://www.panasonic.com/help Wireless Connection Settings Advanced Setup Wireless Mode 802.11b/g Network Name (SSID) (Shown on the included Wireles.
Base Unit Settings For assistance, please visit http://www.panasonic.com/help 203 Setting your computer Obt aining an IP address automatically on y our computer When you cannot log in the base unit by usi ng the computer you conn ected to the Ethernet (LAN) port on the base unit, check the Local Area Connectio n setting on the computer .
Base Unit Settings 204 For assistance, please visit http://www.panasonic.com/help 5 Select [Obtain an IP address automatically] . 6 Click [OK] . 7 Click [OK] , then close the Network Connection window .
Base Unit Settings For assistance, please visit http://www.panasonic.com/help 205 4 Select [Internet Protoco l (TCP/IP)] , then click [Properties] . 5 Select [Use the following IP address:] .
Base Unit Settings 206 For assistance, please visit http://www.panasonic.com/help 6 Enter the IP address. L The IP address mu st be within the range of 192.168.102.1 - 192.168.102.254 except for 192.168.102.1 (the default IP addres s of the base unit on the LAN side).
Base Unit Settings For assistance, please visit http://www.panasonic.com/help 207 Changing the proxy server settings on Web bro wser If your Internet service prov ider uses the proxy server , y ou cannot log in the base unit. Change the proxy server settings on your Web browser .
Base Unit Settings 208 For assistance, please visit http://www.panasonic.com/help 4 See if the “Use a proxy server for your LAN” check box is checked or not. N If checked, click [Advanced…] and go to step 5. N If not checked, click [Cancel] then close the Internet Options window .
Base Unit Settings For assistance, please visit http://www.panasonic.com/help 209 Note: L In step 5, enter the handset’s IP address in to the “Do not use proxy serve r for addresses beginning with:” data field when you u pdate the firmware of the handset.
Useful Information 210 For assistance, please visit http://www.panasonic.com/help Additional accessories Sales and support information L T o order addi tional accesso ries, call 1-800-332-5 368. L TTY users (hearing or speech impaired users) can call 1-866-605-12 77.
Useful Information For assistance, please visit http://www.panasonic.com/help 211 Error messages If the unit detects a problem, one of the following messages is shown on the handse t display . Network: Sign in: Display message Cause/solution Networks were not found.
Useful Information 212 For assistance, please visit http://www.panasonic.com/help General: <Skype name> This name is not available. Please select another. L The Skype name you selected is already in use. L Press { OK } i Select another Skype name.
Useful Information For assistance, please visit http://www.panasonic.com/help 213 Battery: Contact list: Making a ca ll: Display message Cause/solution Battery or charger error occurred. Please unplug charge cable. Press OK to restart your device. L Battery or charger error occurred.
Useful Information 214 For assistance, please visit http://www.panasonic.com/help Settings: Software up date: <number> Invalid number. L Enter the phone number including country code (page 84). Display message Cause/solution Invalid L The settings you entered are not correct.
Useful Information For assistance, please visit http://www.panasonic.com/help 215 T roubleshooting If problems occur wh ile operating the h andset an d the base uni t, you can refer to the check list below . Fo r up-to-date support information, visit http://www .
Useful Information 216 For assistance, please visit http://www.panasonic.com/help The Temporary LAN side Network setting page is displayed. L The networks on the WAN side and the LAN side overlap (page 196). After clicking [Restart] , the Top Menu is no t displayed.
Useful Information For assistance, please visit http://www.panasonic.com/help 217 Computer communic ation: Problem Cause/Solution “The system has detected a conflict for IP address with the system h.
Useful Information 218 For assistance, please visit http://www.panasonic.com/help Base unit Indicato rs: Problem Cause/Solution The WAN Indicator is blinking in red. L The base unit hardware may be defecti ve. L Unplug the base unit’s AC adaptor . Reco nnect the adaptor and try agai n.
Useful Information For assistance, please visit http://www.panasonic.com/help 219 Handset: Battery char ge: Network co nnection: Contact list: The LAN Indicato r is off. L Check that the base unit and th e computer are connected properly . L Check that the computer is turned on.
Useful Information 220 For assistance, please visit http://www.panasonic.com/help Sign in to Skype: Making/Answering calls: Problem Cause/Solution I cannot sign in to Skype. L Make sure that you use t he correct Skype name and password. If you have forgotten your password, please visit http://www.
Useful Information For assistance, please visit http://www.panasonic.com/help 221 Handset Indicator: The handset do es not ring. L The ringer volume is turned off. Adjust the volume (page 86). L The silent mode is on. Change the silent mode to off (page 71).
Useful Information 222 For assistance, please visit http://www.panasonic.com/help Up dating Firmware (Handset): Handset locator: Problem Cause/Solution During t he handset downloads the Panasoni c firmware, “Cannot d isplay the webpage” is displayed on the we b browser.
Useful Information For assistance, please visit http://www.panasonic.com/help 223 FCC and other information This device complies with Part 15 of the FCC Rules.
Useful Information 224 For assistance, please visit http://www.panasonic.com/help L For body-worn operation, the handset must be used only with a non-metallic accessory . Use of other accessories may not en sure compliance with FCC RF exposure requirements.
Useful Information For assistance, please visit http://www.panasonic.com/help 225 Industry Canada (IC) and other information The term “IC:” before the radio certification number only signi fies that Industry Canada radio technical specifications were met.
Useful Information 226 For assistance, please visit http://www.panasonic.com/help Règles d’Industrie Ca nada et autres renseignement s L ’acrony me « IC » placé devant le num éro d’homologation indique seulement que l’appareil satisfait aux spécifi cations de Industrie Canada.
Useful Information For assistance, please visit http://www.panasonic.com/help 227 MISE EN GARDE: T oute modification non expressément appr ouvée par la partie responsable de la conformité de l’appareil pourrait entraîner la révocation du privilège d’util iser l’appareil.
Useful Information 228 For assistance, please visit http://www.panasonic.com/help For European Union (EU) Declaration of Confo rmity: Panasonic Communications Co.
Useful Information For assistance, please visit http://www.panasonic.com/help 229 Information on Disposal fo r Users of W aste Electrical & Electronic Equipment (private households) This symbol on the products and/or accompanying documents means that used electrical and electronic products should not be mixed with gene ral household waste.
Useful Information 230 For assistance, please visit http://www.panasonic.com/help S pecifications Base unit: Router feature W AN connection mode : DHCP , PPPoE, S tatic DHCP server: Y es (max.
Useful Information For assistance, please visit http://www.panasonic.com/help 231 *1 The figures shown are theo retical maximum s and not the actu al figures when using the product. Wireless feature T ransmission sp eed *1 : IEEE 802.1 1b: 1 1/5.5/2/1 Mbps IEEE 802.
Useful Information 232 For assistance, please visit http://www.panasonic.com/help Handset: Skype feature Calls: Skype-to-Skype calls SkypeIn calls SkypeOut calls Conference calls (gu est only) Call waiting Skype V o icemail: Y es Contact list: Y es (max.
Useful Information For assistance, please visit http://www.panasonic.com/help 233 *1 IEEE 802.1 1g is used for maintenance. *2 The figures shown are theo retical maximum s and not the actu al figures when using the product. Note: L Design and specificatio ns are su bject to change without notice.
Index 234 For assistance, please visit http://www.panasonic.com/help Index A Answering calls: 86 AP Configuration: 52 Auto sign in: 11 8 B Base unit Setting: 36 Battery Charge: 58 Installation: 57 Lev.
Index For assistance, please visit http://www.panasonic.com/help 235 V V ersion Information: 181 V oicemai l: 91 , 93 Vo l u m e Receiver: 88 Ringer: 86 S p eaker: 88 W Wi reless: 168 Wireless Security: 170 Wireless S tatus: 179 WP1050.
If you need assistance with setup or operation 1 Visit our website: http://www.pana sonic.com/help 2 Contact us via the web at: http ://www.panasonic.co m/contactinfo 3 Call us at: 1-800-211-PANA (1-800-211-7262) TTY users (hearing or speech impaired users) can ca ll 1-877-833-8855.
An important point after buying a device Panasonic KX WP1050 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Panasonic KX WP1050 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Panasonic KX WP1050 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Panasonic KX WP1050 you will learn all the available features of the product, as well as information on its operation. The information that you get Panasonic KX WP1050 will certainly help you make a decision on the purchase.
If you already are a holder of Panasonic KX WP1050, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Panasonic KX WP1050.
However, one of the most important roles played by the user manual is to help in solving problems with Panasonic KX WP1050. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Panasonic KX WP1050 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
