Instruction/ maintenance manual of the product BL-C10A Panasonic
Go to page of 104
Operating Instructions Please read this manual before using and sa ve this manual for future ref erence. Netw ork Camera Panasonic Netw ork Camera W ebsite: http://www .
Operating Instruc tions 2 Main Features V arious remote monitoring features • Pyro electr ic in frare d se nsor *1 detect s tempera ture dif ferences caused by a human body or animals. • De tection can let came ra transfer ima ges by E-m ail or FTP *2 .
Operati ng Instructio ns [For assi stance, p lease call : 1-800-272- 7033] 3 Suppor ting Viewnetcam. com service Vi ewnetcam.com service al lows you to access t he camera over the Internet w ith your favo rite doma in name (e.g. bob.viewne tcam.co m) instea d of a glob al IP address.
Operating Instruc tions 4 System Re quirements for your PC Y our PC (Personal Computer) a nd network mus t meet the fo llowing tec hnical specifi cations f or the camera to work pro perly . Note See Panas onic Networ k Camera s upport webs ite at http://p anasonic.
Operati ng Instructio ns [For assi stance, p lease call : 1-800-272- 7033] 5 IMPORT ANT SAFETY INSTRUCTIONS When using this unit, basic safety precaut ions s houl d always be follow ed to reduce the risk of fire, ele ctric shock, o r personal injury .
Operating Instruc tions 6 T able of C ontent s 1 Camera Monitoring ............ .............. .............. .............. . 8 1.1 Accessing the Camera ........... .................... ................... ............. .... 8 1.2 Viewing Single Ca mera page .
Operati ng Instructio ns [For assi stance, p lease call : 1-800-272- 7033] 7 3 Camera Maintena nce .............. .............. .............. ........71 3.1 Mai ntenance page..... ................... .................... ............. ..............
Operating Instruc tions 8 1 Camera Monito ring 1.1 Accessing the Camera 1. S tart u p th e web bro wser o n yo ur PC. 2. Enter " http: //IP Address (or URL):Po rt Number " o n the address bar , and press [ Enter] on the keyb oard. • When p ort number is 80 (defau lt), you do not need to enter p ort number .
Operati ng Instructio ns [For assi stance, p lease call : 1-800-272- 7033] 9 3. Click th e following tabs to display e ach p age. Note When use rs oth er than an a dministrato r are acce ssing the camera, [Setup] and [Mai ntenance ] tab wil l not be dis played.
Operating Instruc tions 10 1.2 Viewin g Sin gle Came ra page 1. Access the camera (see p age 8). • The T op p age is disp layed. 2. Click th e [Single] tab at the top of t he pag e. • When Se curity W arning window is displa yed, see page 1 1. 3. Clos e the web bro wser .
Operati ng Instructio ns [For assi stance, p lease call : 1-800-272 -7033] 1 1 Security W arning window T o view a video (Moti on JPEG), Activ eX ® Control s must be in st alled. Whe n trying to displa y a video fo r the first time, Secu rity W arning wi ndow will be displayed.
Operating Instruc tions 12 1.2.1 Bringing the Cli cked Point to Center (Crick to Center) When you click a certa in point o n the camera image, the p oint is c entered on the image. 1. Move t he cursor to th e desired po int. 2. Click it. • The cl icked po int is ce ntered.
Operati ng Instructio ns [For ass istan ce, please call: 1-800-27 2-7033] 13 1.2.2 Ca pturing a S till Imag e A still im age can be saved on your PC. 1. Operate pan/til t and sel ect a reso lution to display an image. 2. Click th e capture i mage but ton.
Operating Instruc tions 14 1.2.3 Using Opera tion Bar Note When the came ra image is not displ ayed cor rectly , click [Re fresh] at th e tool bar on t he w eb b rowser. The imag e w ill b e re fres hed. End D ispla y and Preset Disp lay: When the p an/tilt has reached the end (L eft End, Right En d, Up End and Down End), End Display appears.
Operati ng Instructio ns [For ass istan ce, please call: 1-800-27 2-7033] 15 Pan/Ti lt Operation Pan/T ilt Range Note Do not app ly press ure to the p an/til t portion of the came ra.
Operating Instruc tions 16 1.2.4 Set ting Home Position/Sensor Position/Preset Button The home position , sensor position and 8 preset buttons can be regis tered. Preset buttons (1—4) are regi stered 1: Upper Lef t, 2: Upper Rig ht, 3: Lower Left and 4: Lower Ri ght.
Operati ng Instructio ns [For ass istan ce, please call: 1-800-27 2-7033] 17 Registering a Preset Button 1. Clic k [P rog ram ]. • [Program ] switches to [Cancel]. Click [Cancel] to quit without saving chang es. 2. Pan and tilt the ca mera to a desired positi on.
Operating Instruc tions 18 V iewing the Image 1. Click the home position, sensor position or registe red preset butt on. • The c amer a tak es ea ch pos itio n, and the i mage is displayed. Sensor P osition P an/Tilt Putting the cursor displa ys the preset name.
Operati ng Instructio ns [For ass istan ce, please call: 1-800-27 2-7033] 19 Changing or Del eting the Sett ings 1. Clic k [P rog ram ]. • [Program ] switches to [Cancel]. Click [Cancel] to quit without saving chang es. 2. Pan and tilt the ca mera to a desired positi on.
Operating Instruc tions 20 1.3 Vi ewing Multi-Camer a p age T o view multip le came ras on the Multi-C amera p age, you need to confi gure each camera on the Multi-C amera Se tup page (s ee pa ge 49). 1. Access the camera (see p age 8). • The T op p age is disp layed.
Operati ng Instructio ns [For ass istan ce, please call: 1-800-27 2-7033] 21 • When viewing v ideo (Mo tion JPEG), we reco mmend usin g an Etherne t ® switchi ng hub instead of th e repeater hub to prevent d egrada tion in vide o displ ay . • Du e to the ne twork conge stion or t he numbe r of acces ses, the refresh interva l may slow d own.
Operating Instruc tions 22 1.4 V iewing Buff ere d Ima ge p age T o buffer the i mages on the internal memory , you need to set up im age transfer settings (se e p age 51 or page 58). Y ou can vi ew buffe red i mages on t his Buf fered Image pag e. 1.
Operati ng Instructio ns [For ass istan ce, please call: 1-800-27 2-7033] 23 4. Display images c licking bu ttons bel ow . Notes • Date , T ime and fra me numbe r are not disp layed in play mode. • Max imum number of buffe red images change depending on resolutio n, image quality and what obje ct t he camera buf fers.
Operating Instruc tions 24 1.5 Viewing Still Images on Y our Mobile Phone Y ou can vie w still im ages ove r the Intern et from a com patibl e mobile ph one. Enter " http://IP address (or URL):Port Num ber/mobile " on a m obile phone and press [OK].
Operati ng Instructio ns [For ass istan ce, please call: 1-800-27 2-7033] 25 Notes • If the image is not display ed properly , try the fo llowing 2 URL s. • Only an admini strator can co ntrol privac y mode. • In pri vacy mode, sensor a nd timer ima ge buf fer/transfer features a lso are stopped .
Operating Instruc tions 26 2 V arious Camera Features 2.1 Using Camera Features 1. Access the camera (see p age 8). Notes • When [Al lowing unre gistered users] is set on th e Security: Adm inistrato r page, c lick [l ogin] button a nd log in as an administrato r .
Operati ng Instructio ns [For ass istan ce, please call: 1-800-27 2-7033] 27 Basic (1) Network Config ures the network s ettings such as connec tion mo de to conne ct the ca mera to the network (s ee pag e 28). (2) UPnP Enables automatic port forward ing or shortcu t to the camer a (s ee pag e 32 ).
Operating Instruc tions 28 2.2 Connecting the Camer a to Y our Network The Netw ork page o ffer s three op tions to con figure the camera. • [Aut omati c Set up] automa tical ly assigns an unu sed IP addre ss to the ca mera, and use s UPnP (Uni versal Pl ug and Pla y) to confi gure your router .
Operati ng Instructio ns [For ass istan ce, please call: 1-800-27 2-7033] 29 4. Click [Save] when finis hed. • New s etti ngs a re s aved. • When finished , the follo wing pa ge is displ ayed. Note The current network setting s are shown on the S tatus page in the Mainte nance sec tion ( see page 7 2).
Operating Instruc tions 30 Setting Descrip tion All ow Acce ss fro m the Internet (Automatic Setup Only ) • Allow Ac cess from the Internet setting auto matically configu res the router's Port .
Operati ng Instructio ns [For ass istan ce, please call: 1-800-27 2-7033] 31 Defaul t Gateway *1 (S tatic/DHCP Only) • If you have the assigned Default Gateway address by your ISP or network administrat or , enter it in this dat a field. • S et 4 digi ts (0—25 5) and 3 p eriods su ch as "192.
Operating Instruc tions 32 2.3 Using UPnP (Universal Plug and Play) UPnP can automatic ally configure your router to b e accessed from the Internet. In order to us e this fe ature, your rou ter needs to support this featu re and it mus t be enabled . Most router manufacturer s disable this feature as the default setting.
Operati ng Instructio ns [For ass istan ce, please call: 1-800-27 2-7033] 33 2.4 Registering wit h the V iewnetcam.com service Vi ewnetcam.c om is a free service (dynamic DNS service) that allows you to assign an easy to rememb er name to the camera, similar t o your favori te web site .
Operating Instruc tions 34 Notes • When the Vi ewnetcam.c om re gistratio n webs ite is not displayed, confirm that the URL i s displa yed in the ri ght column o f the Y our Acco unt Link. If the URL is not displa yed, follo w the procedure s below .
Operati ng Instructio ns [For ass istan ce, please call: 1-800-27 2-7033] 35 2.5 Setting Date and Tim e The D ate a nd T ime p age allows you to set date and time. Date and time are used for image buffe r/transfer , operat ion time an d time st amps on the buffe red image.
Operating Instruc tions 36 3. Click [Sa ve] when fini shed. • New se ttings are s aved. • When fi nished, " Success!" is displ ayed. 4. Click [G o to Date and T ime p age]. • The D ate and T ime pag e is disp layed. Note Date and time settings are subjec t to change due to the temperature.
Operati ng Instructio ns [For ass istan ce, please call: 1-800-27 2-7033] 37 2.6 Changing Camer a Settings The Camera page allo ws you to set the cam era name, white balance, AC po wer source fre quency a nd pan/ti lt range. 1. Click [Camera ] on the Se tup page.
Operating Instruc tions 38 Setting Descrip tion Came ra Name • Th e camera nam e is dis played o n the Single C amera page . • Enter ASC II characte rs (see p age 96) o r characters in each la nguage (1—1 5 charact ers for a 1 -byte charact er and 1—7 c haracters for a 2-byte c haracter).
Operati ng Instructio ns [For ass istan ce, please call: 1-800-27 2-7033] 39 3. Click [Save] when finis hed. • Ne w settings are saved. If the home position is change d, the camera turns to the ho me posi tion. • When finished , "Succes s!" is dis played.
Operating Instruc tions 40 Specifying Pan/Tilt Range 1. Access the camera (see page 8), and click [Single] a t the top of the T op page . 2. Open a nother web b rowser , and displ ay the Camera page (see page 3 7). 3. Align th e Single Cam era page and the C amera pag e side to si de.
Operati ng Instructio ns [For ass istan ce, please call: 1-800-27 2-7033] 41 2.7 Changing Authentication Setting and Administrat or User Name and Password The Securi ty: Admini strator p age allows you to ch ange authenti cation, adminis trator user name and passw ord.
Operating Instruc tions 42 Note When us ers other t han an admin istrator are accessing th e camera, [Set up] and [Maintena nce] tab w ill not be displ ayed. 3. Click [Sa ve] when fini shed. • New se ttings are s aved. • When fi nished, " Success!" is displ ayed.
Operati ng Instructio ns [For ass istan ce, please call: 1-800-27 2-7033] 43 4. Click [Go t o Security : Administrato r page] . • The Se curity: Ad ministrator p age is display ed. Notes • When the user n ame and passwo rd have be en chang ed, the ca mera displa ys an au thentication window .
Operating Instruc tions 44 2.8 Loggi ng in to the Camera If you set [Permit a ccess fr om guest us ers] on the Security: Adm inistrato r page, [Login] is dis played at the top of the page. After you log in as an admini strator , you can acc ess the Setu p page and the M aintenance p age.
Operati ng Instructio ns [For ass istan ce, please call: 1-800-27 2-7033] 45 2.9 Creating, Modifying or Deleting General Users The General User pa ge allows you to crea te, modify or delete general users. Up to 50 general users can b e reg istered. The access level i s s et fo r each g eneral user .
Operating Instruc tions 46 4. Click [Sa ve] when fini shed. • New settings are saved. • When finishe d, "Success !" is dis played. 5. Click [Go to Genera l User page ]. Setting Descrip tion User I D List • Up to 50 g eneral use rs can be registere d.
Operati ng Instructio ns [For ass istan ce, please call: 1-800-27 2-7033] 47 2.10 Changing Initial Settings on the Si ngle Camera p age or the Multi-Camera p age The Image Display page a llows you to change initial settings (display settings when a user accesses the ca mera) of image resoluti on, image quality and refresh interval.
Operating Instruc tions 48 3. Click [Sa ve] when fini shed. • New settings are saved. • When finishe d, "Success !" is dis played. 4. Click [G o to Ima ge Display p age]. • The Imag e Disp lay page i s dis playe d. Setting Descript ion Image Re solution • Select the im age reso lution.
Operati ng Instructio ns [For ass istan ce, please call: 1-800-27 2-7033] 49 2.1 1 Configuring Multi ple Cameras The Multi -Camera Setu p page allows you t o configu re the camera IP address es and cam era names to view mult iple imag es on the Multi-C amera pag e.
Operating Instruc tions 50 Notes • Set the private IP address an d port num ber for the c amera on the same LAN. • If you access the came ra from the Internet, set th e host na me (or the global IP a ddress) an d port numbe r . 4. Click [Sa ve] when fini shed.
Operati ng Instructio ns [For ass istan ce, please call: 1-800-27 2-7033] 51 2.12 Buffering or T ransferri ng Images by T imer The Image Buffer/ T ransfer p age allo ws you to enable imag e buff er/transfer by E- mail or FT P . 1. Click [Buf fer/T ransfer] on the Se tup pag e.
Operating Instruc tions 52 4. Set the ti me, and c lick [Next>]. Note The timer works by an internal clock. Set th e date and t ime before using timer buffer /tran sfe r (see pag e 35 ). • Clicking [<Bac k] takes you bac k to the p revious p age.
Operati ng Instructio ns [For ass istan ce, please call: 1-800-27 2-7033] 53 6. Set the im age buf fer freque ncies, and click [Ne xt>]. • Clicking [ <Back] tak es you b ack to the pre vious p age. • Clicking [ Cancel] tak es you bac k to the Imag e Buffe r/T ransfer p age withou t saving changes.
Operating Instruc tions 54 7. Select t he transfer method, a nd click [Next> ]. • Clicking [<Bac k] takes you bac k to the p revious p age. • Clicking [Canc el] ta kes you back to the Ima ge Buff er/T ransfer p age without s aving chan ges.
Operati ng Instructio ns [For ass istan ce, please call: 1-800-27 2-7033] 55 When you s et [FTP] for T ransfer Metho d Select [FT P], and cli ck [Next>]. Th e following p age is displayed. • Clicking [ <Back] tak es you b ack to the pre vious p age.
Operating Instruc tions 56 When you set [E-mai l] for T ransfer Metho d Select [ E-mail], an d click [Nex t>]. The fol lowing p age is dis played. • Clicking [<Bac k] takes you bac k to the p revious p age. • Clicking [Canc el] ta kes you back to the Ima ge Buff er/T ransfer p age without s aving chan ges.
Operati ng Instructio ns [For ass istan ce, please call: 1-800-27 2-7033] 57 8. Confirm th e settings, a nd click [Save]. • New s etti ngs a re s aved. • When finis hed, "Succ ess!" is d isplaye d. 9. Click [Go t o Image Buf fer/T ransfer page] .
Operating Instruc tions 58 2.13 B ufferi ng or T ransferring Images by Sensor The Imag e Buffe r/T ransfer pa ge allows you to en able image b uffer/t ransfer by E- mail or FTP . 1. Click [Bu ffer/T ransfer] on th e Setup p age. 2. Click [No .] to enable b uffer/tr ansfer .
Operati ng Instructio ns [For ass istan ce, please call: 1-800-27 2-7033] 59 4. Set the tim e, and c lick [Next>]. Note The timer works by an i nternal clock . Set the date and time befor e using timer buffer /tran sfer (se e page 35). • Clicking [ <Back] tak es you b ack to the pre vious p age.
Operating Instruc tions 60 6. Set the im age sett ings, and cl ick [Next >]. • Clicking [<Bac k] takes you bac k to the p revious p age. • Clicking [Canc el] ta kes you back to the Ima ge Buff er/T ransfer p age without s aving chan ges.
Operati ng Instructio ns [For ass istan ce, please call: 1-800-27 2-7033] 61 7. Set the im age buf fer freque ncies, and click [Ne xt>]. • Clicking [ <Back] tak es you b ack to the pre vious p age. • Clicking [ Cancel] tak es you bac k to the Imag e Buffe r/T ransfer p age withou t saving changes.
Operating Instruc tions 62 8. Select t he transfer method, a nd click [Next> ]. • Clicking [<Bac k] takes you bac k to the p revious p age. • Clicking [Canc el] ta kes you back to the Ima ge Buff er/T ransfer p age without s aving chan ges.
Operati ng Instructio ns [For ass istan ce, please call: 1-800-27 2-7033] 63 When you s et [FTP] for T ransfer Metho d Select [FT P], and cli ck [Next>]. Th e following p age is displayed. • Clicking [ <Back] tak es you b ack to the pre vious p age.
Operating Instruc tions 64 When you set [E-mai l] for T ransfer Metho d Select [ E-mail], an d click [Nex t>]. The fol lowing p age is dis played. • Clicking [<Bac k] takes you bac k to the p revious p age. • Clicking [Canc el] ta kes you back to the Ima ge Buff er/T ransfer p age without s aving chan ges.
Operati ng Instructio ns [For ass istan ce, please call: 1-800-27 2-7033] 65 9. After you confirm the settings and click [Next>], set E-mail notifica tion and click [Next>]. • If you sel ect [Enable ], the E-ma il Notifica tion When T riggered p age is displa yed.
Operating Instruc tions 66 11 . Click [G o to Image Bu ffer/T ransfer p age]. • The Imag e Bu ffer/Transf er page is disp layed . Notes • If you set a s hort interv al to transfe r image to a mobile ph one, many E- mails m ay be sen t to it lea ding to a large phone b ill.
Operati ng Instructio ns [For ass istan ce, please call: 1-800-27 2-7033] 67 2.14 Spec ifyi ng Oper ation Time The Operation Time page allows you to limit the operation time. The camera image turns to a gray scre en out side the o peration t ime. 1. Click [Ope ration T ime] on the Se tup pag e.
Operating Instruc tions 68 4. Click [Sa ve] when fini shed. • New settings are saved. • The Operation T ime p age is dis played. About Operati on Ti me In the op eration tim e setting s, the ena bled setting s tak e priority over the dis abled settings .
Operati ng Instructio ns [For ass istan ce, please call: 1-800-27 2-7033] 69 2.15 Changing Indicator Display The Indic ator Control page allo ws you to select Indic ator opera tion. Indicato r has three opti ons. •A l w a y s o n • Turn the indi cator on whe n the cam era is acce ssed.
Operating Instruc tions 70 2.16 Enabling Privacy Mode Pressing the privac y button turns the camera into privacy mode. Y ou can keep your privacy in privacy mode. In this case, t he camera operation stops , and the image tran sfer b y time r or s enso r (see page 51 or page 58) is also stopp ed.
Operati ng Instructio ns [For ass istan ce, please call: 1-800-27 2-7033] 71 3 Camera Main tenance 3.1 Maintenance p age Maintena nce (14) S t atus Displa ys the ca mera sett ings and status (see p age 72). (15) Re start Rest arts th e camera (se e page 72).
Operating Instruc tions 72 3.1.1 Confirming the St atus The S tatus page a llows you to check th e statu s of the cam era. The st atus informat ion provid es support fo r troubles hooting. Clickin g [S tatus] disp lays the following p age. Note See Panas onic Networ k Camera s upport webs ite at http://p anasonic.
Operati ng Instructio ns [For ass istan ce, please call: 1-800-27 2-7033] 73 3.1.3 Upd ating the Came ra Firmware The Upda te Firmware p age allows you to update the c amera firm ware. If the ne w firmware is availab le, insta ll it into the came ra. Notes • Do not turn of f the power during firmware update .
Operating Instruc tions 74 • The Update p age is d isplayed in about a minute. 4. Click [Br owse...]. • A dialog box is displ ayed to s elect the firm ware. 5. Select t he firmware ( including d irectory infor mation) an d click [Open]. • The firmware fil e name is d isplayed.
Operati ng Instructio ns [For ass istan ce, please call: 1-800-27 2-7033] 75 7. Confirm th at the versio n number o n the T op page i s updated. • If the versi on numbe r is updat ed, the firmw are updat e is comple te.
Operating Instruc tions 76 3.1.4 Creating C onfiguration File A configu ration fil e can be s aved on yo ur PC. Y ou can load the cam era setti ngs from the c onfigurat ion file on th e Load Sett ings p age (see p age 77). 1. Clic k [Save Setting s] on the Maintena nce p age.
Operati ng Instructio ns [For ass istan ce, please call: 1-800-27 2-7033] 77 3.1.5 L oading Settings from a Configuration File The setti ngs can b e loaded from a config uration file. If you res et the camera to factory d efault, the camera c an load i ts settin gs from the c onfigurati on file.
Operating Instruc tions 78 3.1.6 Reset ting the C amera to Fa ctory Def ault All cam era settin gs are reset t o factor y default directly aft er the Exec ute button is clicke d. 1. Click [Re set to Factory Default] on th e Maintenanc e pag e. 2. Click [Ex ecute].
Operati ng Instructio ns [For ass istan ce, please call: 1-800-27 2-7033] 79 3.2 Suppor t p age 3.2.1 Seeing Help p age The Help p age dis plays exp lanations fo r each fea ture about t he followin g 1. to 6. items. Clicking [Help] on th e Support p age displays t he next p age.
Operating Instruc tions 80 3.2.3 Seeing Support Information Y ou can see support i nformation on the Pan asonic Ne twork Camera support website. Clicking [Su pport Inform ation] on the Support p age dis plays the URL, click it. Note If the camera is not connected to the Internet, the website cannot be displayed .
Operati ng Instructio ns [For ass istan ce, please call: 1-800-27 2-7033] 81 3.3 F ACTOR Y DEF AUL T RESET Button The camera has a F ACTORY DEF AUL T RESET button on the bottom. Pressing the F ACTORY DEFAUL T RESET button resets the camera to factory default.
Operating Instruc tions 82 3.4 Default Setting Li st Basic Items Default Req uired Notes Network Connection Mode Autom atic Setup - Automatic Setup/ S tatic/DHCP Allow Acc ess from the Internet (Au tomatic Setup onl y) No - - Network Configu ration from Setup Program (S tatic/DHCP only) Enable - - Port No.
Operati ng Instructio ns [For ass istan ce, please call: 1-800-27 2-7033] 83 Vi ew n et cam.co m Enable No check - - Date and Ti m e T ime Setting AM/PM - - Automatic T ime Adjustme nt No che ck When .
Operating Instruc tions 84 Account Items Default Re quired Notes Security: Administrator Genera l Authentic ation D o n ot pe r m i t access fro m guest u sers -- User Na me [Blank ] When setting admi.
.
Operating Instruc tions 86 Multi- Came ra Multi- Camera [Blan k] - - Dis play Che cked W hen set ting Multi -Camera - IP Address or Hos t Name [Blank] When settin g Multi -Camera IP address*1 Host nam e*5 is 1—255 characters . Port No. [Blank] When se tting Multi -Camera 20, 21, 25 and 1 10 are n ot availabl e.
Operati ng Instructio ns [For ass istan ce, please call: 1-800-27 2-7033] 87 Preset Buttons Items Default Require d Notes Pres et Buttons Preset 1 UpperLef t - - Preset 2 UpperRight - - Preset 3 LowerLef t - - Preset 4 LowerRight - - *1 Set 4 digits (0—255) and 3 periods such as "192.
Operating Instruc tions 88 3.5 Cleaning Clean the came ra after the c amera is tu rned of f. 3.5.1 Cleaning the Main Unit Clean the unit with a dry and s oft cloth. Notes • Do not use alcohol, pol ishing p owder , cleanser , benzine, thinner , wax, petrole um products or hot water to wipe the camera.
Operati ng Instructio ns [For ass istan ce, please call: 1-800-27 2-7033] 89 3.6 Setting an I P Address on Y our PC Y our PC's IP a ddress can be assig ned by th e following procedures. 1. Display the TCP/IP Propertie s window . • The step s are dif ferent depending on your OS.
Operating Instruc tions 90 3.7 Using Setup Program The Setup Program can be used for the fol lowing purp oses. • Finding the IP address and port numbe r of the cam era connected to your netw ork. • Setting up th e camera aut omatically . • Setting up the camera manually to a S tatic or a DHCP setting.
Operati ng Instructio ns [For ass istan ce, please call: 1-800-27 2-7033] 91 Automatic Setup ( Local or In ternet Access) or Manual Setup 1. Click [Exec ute] on the Cam era List windo w shown on p age 90 . 2. Click ea ch button to execu te the prog ram.
Operating Instruc tions 92 3.8 Setting Y our PC 3.8.1 Setti ng the Prox y Server Settin gs on Web Browser If the proxy serve r is not us ed, the setti ngs are no t required. If you are us ing the proxy s erver , the followin g setting s are required .
Operati ng Instructio ns [For ass istan ce, please call: 1-800-27 2-7033] 93 3. Click th e [Connections ] tab, and click [ LAN Settings] . 4. See if the Use a p roxy server c heck box i s check ed or not. If checked, click [Advance d...]. • If not chec ked, click [Cancel].
Operating Instruc tions 94 5. Enter the camera IP a ddress i nto the Do no t use proxy server for addresses beginni ng with data fi eld. 6. Click [OK].
Operati ng Instructio ns [For ass istan ce, please call: 1-800-27 2-7033] 95 3.8.2 Setting UPnP to Display Camera Shortcut in My Network P laces T o displ ay the cam era shortcut i n the My Ne twork Places folder , Windows compone nt should be added. Enable UPnP (Universal Plug and Play) followi ng the step s below .
Operating Instruc tions 96 3.9 ASCII Character T able (space) ! " # $ % & ' ( ) * + , - . / 0 1 2 3 4 5 6 7 8 9 : ; < = > ? ASCII Character T able @ A B C D E F G H I J K L M N O P.
Operati ng Instructio ns [For ass istan ce, please call: 1-800-27 2-7033] 97 3.10 File Size and Number of Buffered Images The follo wing tab le show s the rela tionship bet ween the fil e size o f the image a nd the ma ximum num ber of buf fered images.
Operating Instruc tions 98 3.1 1 Specifications Network Camera Items Spe cifications Pan/T ilt A ngle Pan: -50 ° to +50 °, T ilt: -40 ° to +1 0 ° Number o f Pixels 1/4-inch CM OS Sensor 320,000 pixe ls Illumina nce 1—10,00 0 lx White Balan ce Auto/Manua l/Hold Focus Fixed 0.
Operati ng Instructio ns [For ass istan ce, please call: 1-800-27 2-7033] 99 Other Specif ications Item s Spe cifica tio ns Interface 10Base-T /100Base-T X Ethernet R J-45 connec tor x 1 Sensor Det ection M ethod Pyroelectri c Infrared Se nsor Sensor R ange H orizont ally Ab out 30 °, V ertically Ab out 85 °, Distanc e About 5 m (16.
Operating Instruc tions 100.
Operati ng Instructio ns 101 Index.
Operating Instruc tions 102 A ActiveX Contro ls 11 Administrat or/General Users/Gues t Us- ers 43 ASCII Chara cter Table 96 B Buffered Im age page 22 C Camera Access 8 Camera pa ge 37 Capture Image Bu.
Operati ng Instructio ns 103 Top pa ge 9 U Update Firmware pag e 73 UPnP pag e 32 V Viewnetcam .com Servic e 33 W Web Browser 4.
Panasonic Consumer Electr onics Company , Division of Matsushita Electric Corporation of America Printed in Japan PSQX3227ZB KK0604RM1064 2004 P anasonic Communications Co ., Ltd. All Rights Reserved. Panasonic Sales Compan y , Division of Matsushita Electric of Puerto Rico, Inc.
An important point after buying a device Panasonic BL-C10A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Panasonic BL-C10A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Panasonic BL-C10A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Panasonic BL-C10A you will learn all the available features of the product, as well as information on its operation. The information that you get Panasonic BL-C10A will certainly help you make a decision on the purchase.
If you already are a holder of Panasonic BL-C10A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Panasonic BL-C10A.
However, one of the most important roles played by the user manual is to help in solving problems with Panasonic BL-C10A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Panasonic BL-C10A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
