Instruction/ maintenance manual of the product AV-HS400AN Panasonic
Go to page of 122
POWER ALARM F1 F2 F3 F4 F5 KEY DSK PinP AUX CLN PVW PGM 1 2 USER AUX SOURCE AUX BUS DELEGA TION 123456789 1 0 AUX PGM/A PST/B BKGD P ATT KEY P ATT FUNC N/R R WIPE DIRECTION WIPE P ATTERN / FUNCTION ON.
2 indicates saf ety information. This class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la c lasse A est conforme à la norme NMB-003 du Canada. F or CANAD A Safety precautions W ARNING: • T O REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APP ARA TUS T O RAIN OR MOISTURE.
3 indicates saf ety information. Safety precautions <For USA-California Onl y> This product contains a CR Coin Cell Lithium Batter y which contains P erchlorate Material – special handling ma y apply . See www .dtsc.ca/go v/hazardousw aste.perchlorate .
4 Contents Description ................................................ 6 Features ..................................................... 6 Precautions for use .................................. 7 1. Functions in each area ......................... 8 1-1.
5 Contents 4. Input/output signal settings............... 61 4-1. Setting the SDI input signals and analog input signals ............................................................. 61 4-1-1. Setting the frame synchroniz er ................. 61 4-1-2.
6 Description This is a 1 ME digital video s witcher which suppor ts a multiple number of HD and SD f or mats. Despite its compact dimensions, the video s witcher comes standard with 4 input connectors and can suppor t 8 input connectors when an option board is used.
7 Precautions f or use Handle carefully . Do not drop the product, or subject it to strong shock or vibration. Do not carr y or mov e the product by the f ader le ver . This is impor tant to prev ent trouble . Use the product in an ambient temperature of 32 °F to 104 °F (0 °C to 40 °C).
8 1. Functions in each area 1-1. Contr ol panel POWER ALARM F1 F2 F3 F4 F5 KEY DSK PinP AUX CLN PVW PGM 1 2 USER AUX SOURCE AUX BUS DELEGA TION 123456789 1 0 AUX PGM/A PST/B BKGD P A TT KEY P A TT FUN.
9 1. Functions in each area 1-2. Cr osspoint area F1 F2 F3 F4 F5 KEY DSK PinP AUX CLN PVW PGM 1 2 USER AUX SOURCE AUX BUS DELEGA TION 123456789 1 0 A UX PGM/A PST/B AMB:FILL / GRN:SOURCE 3 PGM/A bus cr osspoint buttons [PGM/A 1 to 10] These are used to select the PGM/A bus video signals .
10 1. Functions in each area 1-3. Wipe area 8 Wipe pattern selector buttons These 12 buttons are used to select the corresponding wipe patterns while the indicator of the [BKGD P A TT] button ( 9 ) or [KEY P A TT] button ( 9 ) is lighted.
11 1. Functions in each area 1-4. User b utton area 1 2 USER = User buttons [USER 1, USER 2] These are used to allocate some functions of the menu settings to the USER 1 b utton and USER 2 button.
12 1. Functions in each area 1-5. T ransition area KEY P A TT FUNC N/R R WIPE DIRECTION WIPE P A TTERN / FUNCTION ON FTB PinP DSK CUT AUT O MIX WIPE BKGD KEY MIX WIPE DSK PinP IN/OUT MEMORY XPT SYSTEM.
13 1. Functions in each area D [A UT O] b utton This is used to automatically e xecute transitions (auto tr ansition) using the transition time which has been set.
14 1. Functions in each area 1-6. LCD men u area L LCD The setting menus are displa yed on the LCD . When the [FUNC] button ( ; ) is pressed and its indicator is lighted and then one of the wipe pattern selector buttons ( 8 ) is pressed, the setting menu is displa yed.
15 1. Functions in each area 1-7. P ositioner area N P ositioner [X/Y] These are used when perf or ming the settings below . PinP position setting Wipe star t position setting (WIPE, SQ #5) Camera con.
16 1. Functions in each area 1-8. SD memory car d area P SD memory card slot The SD memor y card (sold separately) is inserted into this slot. SD Logo is a trademark. Q SD memory card access LED This LED lights while the data on the SD memor y card is being accessed.
17 1. Functions in each area 1-9. Rear panel connections area POWER 1 REF SLOT2 2 SLOT 4 2 3 4 SLOT1 1 SLOT2 8 ～ IN SDI INPUTS T ALLY 6 6 INPUTS SDI OUTPUTS IN OUT 3 IN OUT 2 IN OUT 1 IN OUT OUTPUTS.
18 1. Functions in each area Y LAN connector [LAN] (RJ-45) (10B ASE-T) Z RS-422 interface connector [RS-422] (D-sub 9-pin, female, inch screw) F or details on connection, refer to “6. External interfaces”. [ T ally output connector [T ALL Y] (D-sub 15-pin, male, inc h screw) F or details on connection, refer to “6.
19 2. System 2-1. Configuration A V -HS400AN PGM PVW A UX Multi K eyOut INPUT1(SDI) INPUT2(SDI) INPUT3(SDI) INPUT4(SDI) INPUT5 UC UC UC UC INPUT6 INPUT7 INPUT8 Black ColorBGD ColorBar FMEM1 FMEM2 REF .
20 2. System 2-2. Connections Connections when implementing gen-lock (frame synchr onizer OFF) When the unit is to be installed and when the connections are to be performed, be absolutely sure to ask your dealer to be responsib le for carrying out the work that needs to be done.
21 2. System Connections when not implementing gen-lock (frame synchr onizer ON) • Example where the optional board is used POWER 1 REF GPI SLOT2 2 SLOT 4 2 3 4 SLOT1 1 SLOT2 8 ～ IN SDI INPUTS.
22 3. Basic operations 3-1. Bac kgr ound transition 3-1-1. Selecting the b us Press the crosspoint buttons to select the material which will be targeted f or the background tr ansition. By pressing these buttons , the signals are selected, and the indicators of the selected buttons light.
23 3. Basic operations 3-1-3. Selecting the transition mode Press the [BKGD] button in the tr ansition area so that its indicator lights in amber . When the [BKGD] button and [KEY] b utton are pressed at the same time, both b uttons are selected. Use the [MIX] and [WIPE] buttons in the tr ansition area to select the background transition mode .
24 3. Basic operations 3-2. Wipe 3-2-1. Selecting the wipe pattern BKGD P A TT KEY P A TT FUNC WIPE P A TTERN / FUNCTION ON WIPE SQ SL 3D P AGE TIME WIPE COLOR KEY CHR KEY FREEZE DSK PinP IN/OUT MEMOR.
25 3. Basic operations 3-2-2. Selecting the wipe direction Operate the wipe direction selector b uttons to select the wipe direction for the bac kground transition. (The ke y transitions are set by the men u. The direction which is set here will not be reflected.
26 3. Basic operations 3-2-4. Setting the wipe start position Any start position can be set for wipe pattern WIPE and SQ #5. The star t position has one set of values f or a backg round patter n and another set f or a ke y patter n. 1 Press the [FUNC] button to light its indicator , and press the [WIPE] b utton to display the WIPE menu.
27 3. Basic operations 3-2-5. Modifying wipe Setting the lighting effect Lighting eff ects can be added when the follo wing wipe patter ns hav e been selected: 3D page: #1, #3, #7, #9 1 Press the [FUNC] button to light its indicator , and press the [WIPE] b utton to display the WIPE menu.
28 3. Basic operations 3-3. K ey This operation combines the bac kground image with another image. The k ey definition can be adjusted, and an edge can be added to the combined image. Also av ailable as materials besides KEY f or combining with the background image are PinP (picture in picture) and DSK (downstream k ey).
29 3. Basic operations 3-3-1. Selecting the ke y type 1 Press the [FUNC] button to light its indicator , and press the [KEY] b utton to display the KEY menu.
30 3. Basic operations 3-3-2. Selecting the ke y material Selecting the key fill and ke y source signals Press the KEY button in the A UX bus selection area, and switch the selection of the k ey fill signal (indicator lights in amber) and ke y source signal (indicator lights in green).
31 3. Basic operations 3-3-3. K ey transitions 1 Select key in the tr ansition mode. Press the [KEY] button in the transition area to light its indicator . T o ex ecute a bac kground transition and k ey transition at the same time, press the [BKGD] b utton and [KEY] b utton together to turn on both indicators.
32 3. Basic operations 5 Execute the transition. Press the [A UT O] button to e xecute the tr ansition automatically for the tr ansition time which has been set.
33 3. Basic operations 3-3-6. Adjusting the chr oma key These steps are taken to adjust the chroma k ey definition. Bef ore proceeding with the adjustments, select “Chroma” as the T ype item setting in “3-3-1. Selecting the ke y type. ” The signal f or the chroma key is created using a specific color tone as a ref erence.
34 3. Basic operations Adjusting the chr oma key 1 Press the [FUNC] button to light its indicator , and press the [CHR KEY] b utton to display the CHR KEY menu. 2 T ur n [F1] to display the Adjust1 sub menu, and turn [F2] to [F5] to set the items.
35 3. Basic operations Making other adjustments P erf or m the ke y density and ke y inv er t settings. 1 Press the [FUNC] button to light its indicator , and press the [KEY] b utton to display the KEY menu. 2 T ur n [F1] to display the Adjust sub menu.
36 3. Basic operations 3-3-7. K ey decorations A border , shadow or other edge can be added to the k ey . Setting the key edge 1 Press the [FUNC] button to light its indicator , and press the [KEY] button to displa y the KEY menu. 2 T ur n [F1] to display the Edge sub menu.
37 3. Basic operations 3-3-8. Masking the ke y signals These steps are taken to mask the k ey signals using the mask signal of the bo x pattern. 1 Press the [FUNC] button to light its indicator , and press the [KEY] b utton to display the KEY menu. 2 T ur n [F1] to display the Mask sub menu.
38 3. Basic operations 3-3-9. Fl ying key Using D VE effects, this k ey enab les the ke y signals that hav e been input to be mov ed, expanded or contr acted.
39 3. Basic operations 3-4. PinP (picture in picture) Another image can be combined with the backg round image. 3-4-1. Selecting the PinP material Press the [PinP] button among the A UX bus selector buttons to light its indicator , and press one of the A UX bus crosspoint buttons 1 to 10 to select the PinP signal.
40 3. Basic operations 3-4-4. PinP adjustments Adjusting the PinP position and size While the PinP menu is selected, adjust the X and Y coordinates using the positioner in the positioner area, and adjust the size using the rotary encoder [Z]. Alternatively , the settings can be performed on the menus.
41 3. Basic operations 3-4-5. PinP decorations A border or soft eff ect can be added to PinP . 1 Press the [FUNC] button to light its indicator , and press the [PinP] b utton to display the PinP menu. 2 T ur n [F1] to display the Border sub menu. <Menu displa y> Border Border Width Soft Mode 2/6 Off 5.
42 3. Basic operations 3-4-6. T rimming settings 1 Press the [FUNC] button to light its indicator , and press the [PinP] b utton to display the PinP menu. 2 T ur n [F1] to display the T rim sub menu. <Menu display> Trim Trim Manual 5/6 Off Free 4:3 Manual Pair 3 T ur n [F2] to select the trimming type using the T r im item.
43 3. Basic operations 3-5. DSK (do wnstream key) Characters or other images can be combined with the bac kground image. 3-5-1. Selecting the DSK type 1 Press the [FUNC] button to light its indicator , and press the [DSK] b utton to display the DSK menu.
44 3. Basic operations 3-5-2. Selecting the DSK material Selecting the DSK fill signal and DSK source signal Press the [DSK] button in the A UX bus selection area to switch the selection of the DSK fill signal (indicator lights in amber) and DSK source signal (indicator lights in green).
45 3. Basic operations 3-5-3. DSK transitions 1 Set the duration of the transition. On the TIME menu, turn [F1] to display the DSK sub menu. As with a background transition, set the tr ansition time. 2 When the [DSK] button in the transition area is pressed, the DSK image is combined (f ade-in) for the transition time which w as set.
46 3. Basic operations 3-5-6. DSK decorations A border , shadow or other type of edge can be added to DSK. Setting the edge 1 Press the [FUNC] button to light its indicator , and press the [DSK] button to displa y the DSK menu. 2 T ur n [F1] to display the Edge sub menu.
47 3. Basic operations 3-5-7. Masking the DSK signals These steps are taken to mask the DSK signals using the mask signal of the bo x pattern. 1 Press the [FUNC] button to light its indicator , and press the [DSK] b utton to display the DSK menu. 2 T ur n [F1] to display the Mask sub menu.
48 3. Basic operations 3-6. FTB (fade to b lack) The user can f ade out from a program image to the blac k screen or f ade in to a program image from a b lack screen. 1 Set the duration of the transition. On the TIME menu, turn [F1] to display the FTB sub menu.
49 3. Basic operations 3-7. Internal color signals 3-7-1. Setting the color bac kground The color backg round to be used by the bus can be set. T wo methods are av ailable: under one method the Hue (h.
50 3. Basic operations 3-8. Freezing the input signals The input signals can be frozen and used. If any of the input signals has been frozen, the freeze status indicator LED lights. While signals are froz en, the tally signals of the corresponding input will not be output.
51 3. Basic operations 3-9. Switc hing the A UX output The user can s witch the A UX output signals. The signals of any of the A UX b us crosspoint button 1 to 10, PGM (prog ram) signals, PVW (pre view) signals or CLN (clean) signals can be selected f or output to the A UX bus .
52 3. Basic operations 3-10. Preset memory Up to 10 panel settings can be stored in this memor y . The table belo w lists the settings which are stored.
53 3. Basic operations Item Description of setting Initial value (factory default) Key K e y type (T ype) Linear Luminance ke y setting ChrmOff K ey adjustment (Adjust) Gain: 100.0, Clip: 0.0, Density: 100.0 Inv er t Off Fill type Bus Fill matte Hue: 0.
54 3. Basic operations ST ORE: This is used to store the panel settings in the preset memory . 1 Press the [FUNC] button to light its indicator , and press the [MEMOR Y] b utton to display the MEMOR Y menu. 2 T ur n [F1] to display the PSMEM sub menu.
55 3. Basic operations 3-11. Frame memories Still images can be stored in the unit’ s two internal frame memories for use . The still images are transf erred to the frame memories through the A UX bus and an SD memory card. Conv ersely , the images in the frame memor ies can be transf erred to an SD memory card.
56 3. Basic operations 3-12. SD memory car ds The unit’ s frame memory data and system data can be stored on SD memor y cards. Conv ersely , this data can be loaded from the SD memor y cards to the unit. Frame memory data (still image data): The unit suppor ts 24-bit (uncompressed) BMP (bitmap) and JPEG (baseline) is the only file formats.
57 3. Basic operations 3-12-1. Initializing the SD memory cards In order f or an SD memor y card to be used in the unit, it must first be initialized b y the unit. Initializing the SD memor y card f or mats it (in compliance with the SD standard) and creates the dedicated director y .
58 3. Basic operations 3-12-2. Sa ving data on SD memory cards 1 Inser t the SD memor y card which has been initialized by the unit, into the SD memory card slot. 2 On the MEMOR Y menu, turn [F1] to display the SDCard sub menu. 3 T ur n [F2] to select “Sa ve” using the Mode item, and then press the [F2] s witch.
59 3. Basic operations 3-12-3. Loading data fr om SD memory cards 1 Inser t the SD memor y card on which the data is stored into the SD memor y card slot. Load the file after its data has been stored in the each folder . Data stored in other folders will not be recognized b y the unit.
60 3. Basic operations 3-12-4. Deleting files on SD memory cards 1 Inser t the SD memor y card on which the data is stored into the SD memor y card slot. 2 On the MEMOR Y menu, turn [F1] to display the SDCard sub menu. 3 T ur n [F2] to select “Delete” using the Mode item, and then press the [F2] s witch.
61 4. Input/output signal settings 4-1. Setting the SDI input signals and analog input signals The user can set the SDI input signals and analog input signals. IN5 to IN8 can be set only when one of the f ollowing optional boards has been connected: SDI input board Analog input board Analog composite input board 4-1-1.
62 4. Input/output signal settings 4-1-2. Setting the input mode The mode can be set f or each input only when HD has been selected as the system format. When SD is selected as the system f or mat, the input mode is alwa ys the same as Normal. Normal: Input signals in conf or mity with the system format take eff ect.
63 4. Input/output signal settings 4-1-3. Setting the analog input gain When the analog input board (option) has been connected, the gain of the input signals can be set. Alternatively , when the analog composite input board (option) has been connected, the gain of the Y signals can be set.
64 4. Input/output signal settings 4-2. Setting the up-con ver ter (option) Select the settings f or the up-conv er ter that is built into the optional boards listed below . SDI input board Analog input board Analog composite input board 1 Press the [FUNC] button to light its indicator , and press the [IN/OUT] b utton to display the IN/OUT menu.
65 4. Input/output signal settings 4-3. Setting the D VI input signals (option) 4-3-1. Setting the D VI input signals The user can set the D VI input signals when the D VI input board (option) has been connected. Signals with the f ollowing resolutions can be input.
66 4. Input/output signal settings <D VI input scaling size table> D VI format Mode HD/1080i HD/720P SD/NTSC SD/P AL 1920 1080 1280 720 720 480 720 576 XGA 1024 768 Fit-V .
67 4. Input/output signal settings 4-3-2. Adjusting the D VI input signals Adjust the clock/phase and position of the D VI input signals. 1 Press the [FUNC] button to light its indicator , and press the [IN/OUT] b utton to display the IN/OUT menu. 2 T ur n [F1] to display the D VIPhs sub menu.
68 4. Input/output signal settings 4-4. Setting the output signals 4-4-1. T ypes of output signals There are five output signal types: PGM, PVW , A UX, MUL TI and KEY OUT .
69 4. Input/output signal settings 4-4-2. Assigning the output signals Assign the output signals to OUTPUT1 to 6. 1 Press the [FUNC] button to light its indicator , and press the [IN/OUT] b utton to display the IN/OUT menu. 2 T ur n [F1] to display the Output sub menu.
70 4. Input/output signal settings 4-5. Setting the sync signals The sync signals to be used by the system can be selected. External sync: F or synchronization with an external sync signal (gen-lock). The ref erence input signal is looped through and output.
71 4. Input/output signal settings 4-6. Adjusting the output signal phase The phase of the output video signals can be adjusted. 1 Press the [FUNC] button to light its indicator , and press the [IN/OUT] b utton to display the IN/OUT menu. 2 T ur n [F1] to display the OutPhs sub menu.
72 4. Input/output signal settings <Phase adjustment setup> REF (System standard) • 1H Output (+1H) • 0H Output (1F delay f or REF and in-phase output) Shortest Output (+0.
73 4. Input/output signal settings <Phases and delay amounts of input/output signals during HD f ormat use> Input signals FS: On, Off Mode: Nor mal, UC or D by D (cannot be selected when the system format is 720p) Video effects Output signals 1 Delay: 90H (75H) or 1F 2 See 4-1-1.
74 4. Input/output signal settings <Phase relationship between input signals and output signals> (for 1080/59.94i f ormat) (Example 1) F1 F2 F1 F2 F1 F2 F1 F2 Input signals (non-synchronized) 1F (frame) Sync signal (Ref) Output signal 1 Output signal 2 (90H) Output signal 2 (1F) Max.
75 4. Input/output signal settings 4-7. Setting the m ulti vie w display The input images, progr am images and previe w images can be output side by side on one screen on the e xternal monitor . 4-7-1. Setting the screen la yout The multi vie w display has three displa y modes: 10-division mode, 4-division mode and 8-division mode .
76 4. Input/output signal settings 1 Press the [FUNC] button to light its indicator , and press the [IN/OUT] b utton to display the IN/OUT menu. 2 T ur n [F1] to display the Multi1 sub menu.
77 4. Input/output signal settings 4-7-2. Setting the split frame and character s Set the frame, char acter brightness and background of the split screens to be displa yed on the multi vie w displa y . 1 Press the [FUNC] button to light its indicator , and press the [IN/OUT] b utton to display the IN/OUT menu.
78 4. Input/output signal settings 4-7-4. Changing the material names Change the INPUT1 to INPUT8 material names shown on the multi vie w display . The def ault settings, preset settings or user settings can be selected f or these names.
79 4. Input/output signal settings 4-8. Setting the on-screen displa y (OSD) The menu screen is superimposed on the previe w output or multi vie w display output f or displa y . 1 Press the [FUNC] button to light its indicator , and press the [IN/OUT] b utton to display the IN/OUT menu.
80 4. Input/output signal settings 4-9. Setting the D VI output signals (option) Set the D VI output signals when the D VI/analog output boards (option) hav e been connected. 1 Press the [FUNC] button to light its indicator , and press the [IN/OUT] b utton to display the IN/OUT menu.
81 4. Input/output signal settings 4-10. Setting the ancillary data In this section, the function f or allowing the ancillar y data of the SDI input signals to pass through is set. If SD f or mat signals are input while the HD format has been set as the system f or mat, it will not be possible f or their ancillar y data to be passed through.
82 4. Input/output signal settings 4-11. Setting the do wn-con verter Select the settings f or the down-conv er ter that is built into the SDI output board (option). 1 Press the [FUNC] button to light its indicator , and press the [IN/OUT] b utton to display the IN/OUT menu.
83 5. System settings 5-1. Selecting the video f ormat One system (input/output signal) video f or mat can be selected. 1 Press the [FUNC] button to light its indicator , and press the [SYSTEM] b utton to display the SYSTEM menu. 2 T ur n [F1] to display the F ormat sub menu.
84 5. System settings 5-2. Setting the cr osspoints 5-2-1. Assigning signals to the cr osspoints External video input signals and inter nally generated signals can be assigned to crosspoint buttons 1 to 10. Displaying the assignment statuses 1 Press the [FUNC] b utton to light its indicator , and press the [XPT] button to displa y the XPT menu.
85 5. System settings The table belo w lists the default settings . Button Signal Description XP1 BLACK Internally generated signal, blac k XP2 INPUT1 Exter nal video input 1: SDI XP3 INPUT2 Exter nal.
86 5. System settings 5-3. Button assignments 5-3-1. Setting the user b uttons The user can assign se veral functions which can be set using the men u items into two user buttons (USER 1 and USER 2). The user buttons light in amber when the assigned function is ON and are off when the assigned function is OFF .
87 5. System settings 5-4. Setting the date and time The user can set the date and time to be used as the SD memor y card’ s time stamp . Be absolutely sure to set them when an SD memor y card is to be used. Setting the date 1 Press the [FUNC] button to light its indicator , and press the [SYSTEM] b utton to display the SYSTEM menu.
88 5. System settings 5-5. Netw ork settings Proceed with the network settings to perform such tasks as updating the software v ersion via LAN. The network initial setup is: IP address: 192.168.0.10, subnet mask: 255.255.255.0 and gatewa y: 0.0.0.0 (un used).
89 5. System settings 5-6. Other settings 5-6-1. Setting the LCD bac klight The LCD backlight can be set to ON or OFF . 1 Press the [FUNC] button to light its indicator , and press the [SYSTEM] b utton to display the SYSTEM menu. 2 T ur n [F1] to display the System sub menu.
90 5. System settings 5-6-4. Setting the GPI The user can set the functions that are to be controlled from the GPI por ts and set whether to enable the control. 1 Press the [FUNC] button to light its indicator , and press the [SYSTEM] b utton to display the SYSTEM menu.
91 5. System settings 5-7. Camera contr ol A camera and pan-tilt head can be controlled from this unit. Up to five camer as can be controlled via a controller (A W -RP655N or A W -RP555N) connected to the unit’ s RS- 422 interf ace connector .
92 5. System settings Example of connections (when the unit and a controller are connected) Controllers that can be connected: A W -RP655N, A W -RP555N F or details on connecting the pan-tilt heads and controller or connecting the pan-tilt heads and cameras, ref er to the operating instructions of each device .
93 5. System settings Example of connections (when the unit and a pan-tilt head are connected) P an-tilt heads that can be connected: A W -HE100N, A W -PH400P , A W -PH405N, A W -PH360N Connection.
94 5. System settings Connections for A W-PH400P POWER 1 REF GPI SLOT2 2 SLOT 4 2 3 4 SLOT1 1 SLOT2 8 ～ IN SDI INPUTS TALLY 6 6 INPUTS SIGNAL SDI OUTPUTS GND IN OUT 3 IN OUT 2 IN OUT 1 IN OUT OU.
95 5. System settings Camera control settings 1 Press the [FUNC] button to light its indicator , and press the [SYSTEM] b utton to display the SYSTEM menu.
96 5. System settings 9 T ur n [F4] to set the control (panning, tilting, lens focusing and lens z ooming) speed using the Speed Item. Fast: Control is e x ercised at the f astest speed. Middle: Control is ex ercised at the medium speed. (This cannot be selected f or the control of lens focusing or lens z ooming.
97 5. System settings 5-8. Status displa ys 5-8-1. Alarm status displa ys These displa ys indicate a trouble status (alarm) in the power supply or f an. 1 Press the [FUNC] button to light its indicator , and press the [SYSTEM] b utton to display the SYSTEM menu.
98 5. System settings 5-8-2. Displa ying the version inf ormation and option information Inf or mation on the unit’ s software and hardw are versions and the statuses of the options are displa yed. 1 Press the [FUNC] button to light its indicator , and press the [SYSTEM] b utton to display the SYSTEM menu.
99 5. System settings 5-9. Initialization Initialization returns the set data to the factory shipment status. (The network settings and the date and time settings are not initialized.) 1 Press the [FUNC] button to light its indicator , and then press the [SYSTEM] b utton to display the SYSTEM menu.
100 6. External interfaces This unit comes with RS-422, GPI and tally connectors to ser v e as external interfaces . 6-1. RS-422 connector This enables the unit to be controlled b y an external de vice.
101 6. External interfaces 6-2. GPI connector These connectors enable the unit to be controlled from an e xternal source. Signals are input using contacts. The follo wing types of control are ex ercised using the contacts as triggers. Use stereo mini plugs with a 3.
102 6. External interfaces 6-3. T ally connector The tally connector comes with tally output, output enable , power supply or f an alarm output pins. The output signals from the tally output pins are f or lighting the tally lamps, and these outputs are open collector outputs.
103 7. Image transmission functions This unit comes with a function f or transmitting still images from the host computer to the unit via LAN and a function f or impor ting still images from the unit into the host computer .
104 7. Image transmission functions How to install the software This section describes how to install the image transmission software (HS400 T ool).
105 7. Image transmission functions Operation This section describes how to operate the image transmission softw are (HS400 T ool). <Startup> On the Star t menu of Windows , select [Programs] [P anasonic] [A V -HS400T ool] [HS400T ool].
106 7. Image transmission functions <T ransmitting images to the unit> 1. Select the mode. Check that “T o HS400” appears in the [Mode] field. If “F rom HS400” appears instead, click the [F rom HS400] button so that “T o HS400” appears.
107 7. Image transmission functions <T ransmitting images from the unit> 1. Select the mode. Check that “F rom HS400” appears in the [Mode] field. If “T o HS400” appears instead, clic k the [T o HS400] button so that “F rom HS400” appears.
108 8. Setting menu tab le A setting is entered when an item displa yed ( ↓ ) is selected and then the [F1], [F2], [F3], [F4] or [F5] s witch is pressed. (It will not be entered unless the s witch is pressed.) Menu Sub menu P arameter 1 Parameter 2 Parameter 3 Parameter 4 T ur n F1 to select.
109 Menu Sub menu P arameter 1 Parameter 2 Parameter 3 Parameter 4 T ur n F1 to select. T ur n F2 to select. T ur n F3 to select. T urn F4 to select. T ur n F5 to select.
110 Menu Sub menu P arameter 1 Parameter 2 Parameter 3 Parameter 4 T ur n F1 to select. T ur n F2 to select. T ur n F3 to select. T urn F4 to select. T ur n F5 to select. DSK DSK P arameter T ype Fill PVW 1/7 Setting range Lum, Linear Bus , Matte On, Off Default v alue Linear Bus Off Adjust P arameter Clip Gain Density Invert 2/7 Setting range 0.
111 Menu Sub menu P arameter 1 Parameter 2 Parameter 3 Parameter 4 T ur n F1 to select. T ur n F2 to select. T ur n F3 to select. T urn F4 to select. T ur n F5 to select.
112 Menu Sub menu P arameter 1 Parameter 2 Parameter 3 Parameter 4 T ur n F1 to select. T ur n F2 to select. T ur n F3 to select. T urn F4 to select. T ur n F5 to select.
113 Menu Sub menu P arameter 1 Parameter 2 Parameter 3 Parameter 4 T ur n F1 to select. T ur n F2 to select. T ur n F3 to select. T urn F4 to select. T ur n F5 to select. SYSTEM Format P arameter Mode ↓ 16:9SQ 1/16 Setting range 1080/59.94i, 1080/50i, 720/59.
114 Menu Sub menu P arameter 1 Parameter 2 Parameter 3 Parameter 4 T ur n F1 to select. T ur n F2 to select. T ur n F3 to select. T urn F4 to select. T ur n F5 to select.
115 9. Appearance Unit: inch (mm) POWER 1 REF SLOT2 2 SLOT 4 2 3 4 SLOT1 1 SLOT2 8 ～ IN SDI INPUTS TALL Y 6 6 INPUTS SDI OUTPUTS IN OUT 3 IN OUT 2 IN OUT 1 IN OUT OUTPUTS 1 5 7 SLOT OFF 2 SLOT1 5 SL.
116 10. Specifications and standar d accessories Specifications Inputs 8 video input lines (maximum) 4 standard video input lines: SDI inputs 4 Maximum of an additional 4 video input lines as .
117 SDI outputs HD: Serial digital (SMPTE 292M) SD: Component digital (SMPTE 259M) BNC connector , PGM 1 (2 outputs), OUTPUT 1 to 6, up to 6 lines OUTPUT 3 to 6 are optional outputs. HD [SMPTE 292M (BT A S-004B) standard complied with] • Output retur n loss More than 15 dB (5 MHz to 750 MHz) More than 10 dB (750 MHz to 1.
118 Control I/O LAN (10BASE-T) 10 Mbps 1 (RJ-45) Serial communication interf ace RS-422 1 (D-sub 9-pin, female , inch screw) • P an-tilt head system (pan-tilt head and camera) control suppor.
119 Appendix (glossary) Defined below are the terms used in this manual. W or d Explanation AB Bus system A bus control mode. By ex ecuting a transition, the A b us and B bus signals are output to the program images alternately .
120 W or d Explanation Frame Memory A memor y which can hold the video signals equiv alent to one frame. Frame Synchr onizer A function which matches the synchronization of non-synchronized video input signals. Freeze A function which continues the displa y of the same image, creating the impression that the image has been “frozen”.
121 W or d Explanation PVW [Previe w] The function for chec king ahead of time the image which will be output after the ne xt transition. The image is output from the PVW system. PGM [Program Bus] The bus which alwa ys carries the program output signals.
F0908Y0 @ P ANASONIC BRO ADCAST & TELEVISION SYSTEMS COMP ANY UNIT COMP ANY OF P ANASONIC CORPORA TION OF NORTH AMERICA Headquarters: 3 P anasonic W a y 4E-7, Secaucus, NJ 07094 (201) 348-5300 EASTERN ZONE: 3 P anasonic W a y 4E-7, Secaucus, NJ 07094 (201) 348-7196 WESTERN ZONE: 3330 Cahuenga Blvd.
An important point after buying a device Panasonic AV-HS400AN (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Panasonic AV-HS400AN yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Panasonic AV-HS400AN - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Panasonic AV-HS400AN you will learn all the available features of the product, as well as information on its operation. The information that you get Panasonic AV-HS400AN will certainly help you make a decision on the purchase.
If you already are a holder of Panasonic AV-HS400AN, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Panasonic AV-HS400AN.
However, one of the most important roles played by the user manual is to help in solving problems with Panasonic AV-HS400AN. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Panasonic AV-HS400AN along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
