Instruction/ maintenance manual of the product AM1 (NZ BASIC) Panasonic
Go to page of 9
AM1 ORDERING INFORMA TION TERMINAL V ARIA TION Standard types, re versed action types and oil tight types are a vailab le in two terminal designs, solder and screw terminals, as sho wn in the abov e c.
AM1 PR ODUCT TYPES 1. Standard type 2. Oil tight types Remarks: 1. Standard par t number indicates UL/C-UL mark. 2. Standard packing f or inner car ton: 20cps.
AM1 OPERA TING CHARA CTERISTICS Standard types Standard types (cont' d) One way types Rever sed action types Oil tight types T ypes of actuator Pin plunger Overtrav el plunger Compact ov er trav el plunger P anel mount plunger Operating f orce, max.
AM1 DIMENSIONS mm General tolerance: ± 0.4 1. Standard types Pin plunger AM1100KF (Solder terminal) AM1300KF (Screw terminal) 2.4 14.6 15 17.5 9.1 5.4 23.3 ± 0.3 4.5 ± 0.1 25.4 ± 0.1 49.2 11.9 O.P . P. T . 4.2 + 0.1 − 0.05 4.2 dia. hole + 0.1 − 0.
AM1 P anel mount roller plunger mm General tolerance: ± 0.4 Dimensions and Operating characteristics are the same as those of P anel mount roller plunger type. Howe ver , the roller joins the switch body at an angle of 90 ° . AM110811KF (Solder terminal) AM130811KF (Screw terminal) 90 ° : Plastic M12 × P1 Roller 12.
AM1 Rigid le ver mm General tolerance: ± 0.4 AM1501KF (Solder terminal) AM1701KF (Screw terminal) 26.1 20.1 ± 0.5 F. P. O.P . R63.5 Lev er : Stainless steel 4.8 Operating f orce, max. 0.69 N Release force , min. 0.14 N Pretrav el, max. mm 10 Mov ement differential, max.
AM1 Rigid roller le ver mm General tolerance: ± 0.4 AM1543KF (Solder terminal) AM1743KF (Screw terminal) 26.1 34.1 max. 20.1 ± 0.5 O.P . F. P. R31 Roller 9.5 dia. × 4: Plastic Operating f orce, max. 1.67 N Release force , min. 0.42 N Pretrav el, max.
AM1 4. Oil tight types mm General tolerance: ± 0.4 The pushbutton part is sealed with the r ubber cap and the connected part between the cap and body is also coated with resin so that these par ts are kept a wa y from foreign matters . This type has resistance to oil.
AM1 NO TES 1. Regarding fastening of s witch body 1) In f astening the switch body , use M4 mounting screws to attach s witches with the torque 1.5 N·m or less. 2) After mounting and wiring, the insulation distance between ground and each terminal should be confir med as sufficient.
An important point after buying a device Panasonic AM1 (NZ BASIC) (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Panasonic AM1 (NZ BASIC) yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Panasonic AM1 (NZ BASIC) - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Panasonic AM1 (NZ BASIC) you will learn all the available features of the product, as well as information on its operation. The information that you get Panasonic AM1 (NZ BASIC) will certainly help you make a decision on the purchase.
If you already are a holder of Panasonic AM1 (NZ BASIC), but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Panasonic AM1 (NZ BASIC).
However, one of the most important roles played by the user manual is to help in solving problems with Panasonic AM1 (NZ BASIC). Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Panasonic AM1 (NZ BASIC) along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
