Instruction/ maintenance manual of the product 7500-PRO Panamax
Go to page of 17
Owner’ s Manual M7500-PRO POWER FILTRA TION AND REGULA TION ACTIVE HIGH CURRENT GROUND ISOLATION ACTIVE BANK 1 ON BANK 2 ON BANK 3 ON BANK 4 ON BANK 5 BANK 5 HC 1 ON HC 2 ON BRIGHTNESS PRESS: METER SELECT Home Theater P ower Management AUTO 1690 Corporate Circle, Petaluma CA 94954 • www .
1 - MAX ® 7500-PRO 1 - RJ-11 telephone cable 2 - Coax cables for satellite TV , cable TV , and/or antennas 2 - Rack ears w/ screws for rack mounting option Important Safety Instructions......................................1 Introduction.............
© 2006 P ANAMAX, INC. All Rights Reserved. P ANAMAX, the Panamax logo and MAX are registered US trademarks of Panamax. ACRegenerator , Firewall for Noise, SurgeGate Plus, Protect or Disconnect and SignalPer fect are trademarks of PANAMAX. SIDACtor is a registered US trademark of T eccor Electronics, Inc.
Y our Audio/Video components are constantly being bombarded by electromagnetic interfer- ence (EMI) and radio frequency interference (RFI) through their power cords. This con- taminated power can affect analog and digital equipment and will degrade the overall per- formance of your entire system.
USA & Canada (800) 472-5555 • (707) 283-5900 • Fax (707) 283-5901 3 CONNECTION DIAGRAM VCR SA TELLITE RECEIVER TV CD PLA YER PROPERL Y GROUNDED AC OUTLET DVD BANK 1 ALWA YS ON BANK 2 SWITCHED .
BANK 1 AL WAYS ON BANK 2 SWITCHED BANK 3 SWITCHED BANK 4 SWITCHED BANK 5 HIGH CURRENT GROUND LUG 15 AMP CIRCUIT BREAKER HD SATELLITE SATELLITE 1 SATELLITE 2 HD CATV / ANT CABLE 1 CABLE 2 MAIN POWER 12.
USA & Canada (800) 472-5555 • (707) 283-5900 • Fax (707) 283-5901 5 FEA TURE DET AILS Power Switch and LED Indicator: Momentary Pushbutton (non-latching); activates a turn-on or turn-off sequence for all the outlet banks. Press and hold the button for 2 seconds to initiate a turn-on or turn-off sequence.
In the Custom Settings mode all of the outlet delays as well as the trigger sources for each individ- ual bank operate from the configuration that has been programmed into the EEPROM of the unit through the communication interface on the rear panel.
HD SATELLITE SATELLITE 1 SATELLITE 2 HD CATV / ANT CABLE 1 CABLE 2 PHONE LINE TO EQUIP 2 PHONE LINE TO EQUIP 1 PHONE LINE IN LAN LINE IN LAN TO EQUIP USB LIGHT UTPUT V/400mA BANK 2 BANK 3 BANK 4 5 HC .
TECHNICAL SPECIFICA TIONS USA & Canada (800) 472-5555 • (707) 283-5900 • Fax (707) 283-5901 8 Design and specifications subject to change without notice due to product improvement. Fuseless/Auto-Resetting.......................................
USA & Canada (800) 472-5555 • (707) 283-5900 • Fax (707) 283-5901 9 MAX PRO-SERIES Communication/Configuration Specifications 1. OVERVIEW The M7500-PRO has a RS232 interface that allows it to communicate with a wide variety of equipment as well as enable custom operating configurations to be programmed into the unit.
USA & Canada (800) 472-5555 • (707) 283-5900 • Fax (707) 283-5901 10 MAX PRO-SERIES Communication/Configuration Specifications (continued) Sets the voltmeter , ammeter and LED brightness to x% Assigns the trigger(s) for an outlet bank or DC trigger output.
MAX PRO-SERIES Communication/Configuration Specifications (continued) USA & Canada (800) 472-5555 • (707) 283-5900 • Fax (707) 283-5901 11 Sets the feedback to ON (unsolicited) or OFF (polled). When ON, a message will be sent to the controller every time the status of an input (i.
MAX PRO-SERIES Communication/Configuration Specifications (continued) USA & Canada (800) 472-5555 • (707) 283-5900 • Fax (707) 283-5901 12 ?ID<CR> ?TRIGST A T<CR> ?OUTLETST A T<CR> ?POWERST A T<CR> ?VOL T AGE<CR> ?CURRENT<CR> ?HELP<CR> Request that the unit identify itself.
MAX PRO-SERIES Communication/Configuration Specifications (continued) USA & Canada (800) 472-5555 • (707) 283-5900 • Fax (707) 283-5901 13 Request a list of all configurable parameters and current settings.
MAX PRO-SERIES Communication/Configuration Specifications (continued) Input voltage falls below the undervoltage threshold. Input voltage falls within safe operating range following an over -voltage or under -voltage condition. Upon leaving the recovery mode following an over -voltage or under -voltage condition.
Panamax warrants to the purchaser of this Panamax audio/video component style power conditioner , for a period of three (3) years from the date of purchase, that the unit shall be free of defects in design, material or workmanship, and Panamax will repair or replace any defec- tive unit.
An important point after buying a device Panamax 7500-PRO (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Panamax 7500-PRO yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Panamax 7500-PRO - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Panamax 7500-PRO you will learn all the available features of the product, as well as information on its operation. The information that you get Panamax 7500-PRO will certainly help you make a decision on the purchase.
If you already are a holder of Panamax 7500-PRO, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Panamax 7500-PRO.
However, one of the most important roles played by the user manual is to help in solving problems with Panamax 7500-PRO. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Panamax 7500-PRO along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
