Instruction/ maintenance manual of the product TFTV836BK Palsonic
Go to page of 25
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 81CM C.
Important Safety Precautions Warning To prevent fire or shock hazard. Do not use this plug with an extension cord. Receptacle or other outlet unless the blades can he fully inserted to prevent blade exposure to prevent fire or shock hazard. Do not expose this appliance to rain or moisture.
W ARNINGS AND CAUTIONS 2 Caution Carry the set requires two or more people Caution Do not drop or push objects into the television cabinet slots or openings. Never spill any kind of liquid on the television receiver. Caution Do not insert anything in the ventilation holes.
W arning and Cautions 3 Caution Never stand on, lean on or push suddenly the television or its stand. You should pay special attention to children. Serious injury may result if it should fall. Caution Do not place your television on an unstable cart, stand, shelf or table.
W arning and Cautions 4 Warning Take care not to connect many appliances to the same mains socket as this could result in fire or electric shock. Do not place objects on this unit. it may damage the screen surface. Warning High voltages are used in the operation of this television receiver.
T able of Contents 5 W arnings and Cautions ...................................................................................................... T able of Contents .....................................................................................
Front / Back Panel Diagram 6 1. LCD TV Button: STANDBY: Turn on/off LCD TV VOL+/-: Adjust Volume CH+/-: Select channel MENU: Into or exit from menu (Use CH+/- button select item. use VOL+/- button to adjust item) SOURCE: Source select STANDBY (on/off) Button 2.
SYSTEMS CONNECTIONS 7 CONNECTION: INPUT/OUTPUT JACK AS FOLLOWS: ANT Input, VIDEO Input. S-VIDEO Input, VGA Input, PC (audio) Input. HDMI, Y Pb Pr 1 Input, Y Pb Pr2 Input CONNECT POWER: Connect the 100-240V~50/60Hz power input of the LCD TV. Notice: 1.
SYSTEM CONNECTION 8 B: Y Pb Pr 1, Y Pb Pr 2, VIDEO 1, VIDEO 2, CONNECT and AUDIO CONNECT Y Pb Pr 2 AUDIO INPUT VIDEO 1 AUDIO INPUT DVD Y Pb Pr output 2 DVD VIDEO 2 DVD Y Pb Pr output 1 DVD VIDEO 1 100.
Remote Controller 9 HDMI Using the Remote Control Unless stated otherwise, the remote control can operate all the features of the LCD TV Always point the remote control directly at the remote sensor in the front of the LCD TV. Remote control instruction 1.
OPERA TION INTRODUCTIONS 10 Tuner on the LCD TV 1. Connect the 100-240V~50/60Hz power input of the LCD TV 2. Press the POWER button to turn or turn off. 3. When the power is on, press the SOURCE button choose the input mode you want. Remark: TV - Y PbPr 1 - Y PbPr 2 - VIDEO 1 - VIDEO 2 - S-VIDEO - HDMI - VGA (PC) 3.
OPERA TION INTRODUCTIONS 1 1 Picture Menu 1. Contrast The scale of control should be 0 -100. When it is set to 0, the image should not be 'Dark' 2. Brightness The scale of control should be 0 -100. When it is set to 0, the image should not be 'Dark' 3.
OPERA TION INTRODUCTIONS 12 1. Flesh Tone The scale of control should be a ON/OFF. 2. Green Tone The scale of control should be ON/OFF. 3. Blue Tone The scale of control should be ON/OFF. 4. Film Mode selection of control is Off and Auto. Sound Menu 1.
OPERA TION INTRODUCTIONS 13 Setup Menu The item "Program" changes the current program number. Other items change the current program settings. After pressing the the setting is stored. The MENU button will NOT save the current settings and the previous setting will be restored.
OPERA TION INTRODUCTIONS 14 7. AFT a. This item is to change the AFT value of the current program. b. The selection of control is On, Off. or a value between (-15, +15). c. When the AFT option of the current program is On, system automatically track the current program frequency by monitoring AFT level.
OPERA TION INTRODUCTIONS 15 Timer Menu 1. Current Time This option adjusts the clock. 2. Off Time This option adjusts the automatically power off timer. The unit is minute. Once the timer is set to a non-zero time, it is enabled and the number decreases every minute.
OPERA TION INTRODUCTIONS 16 Timer Menu 1. Current Time This option adjusts the clock. 2. Off Time This option adjusts the automatically power off timer. The unit is minute. Once the timer is set to a non-zero time, it is enabled and the number decreases every minute.
OPERA TION INTRODUCTIONS 17 AV Setup Menu 1. Colour a. This item is to change the colour system of the current AV source. b. The selection of control is AUTO, NTSC, PAL, SECAM, PAL60, NTSC443. HDTV /HDMI Setup Menu 1. H Position The scale of control should be (-10) - (+10).
OPERA TION INTRODUCTIONS 18 PC Setup Menu 1. H Position The scale of control should be (-10) - (+10). 2. V Position The scale of control should be (-10) - (+10). 3. Auto Sync a. This item is to automatically setup the position settings of the current PC signal.
OPERA TION INTRODUCTIONS 19 Dynamic Picture Mode Menu The Picture Mode Menu should appear at the left bottom part of the screen. Use the following keys to navigate through the picture mode menu: a. Use PlC MODE button to call out picture mode menu, and adjust the picture mode.
OPERA TION INSTRUCTIONS 20 TELETEXT (Optional) Teletext features may vary depending on the Broadcasting Companies and is only available if the channel selected is transmitting Teletext.
Operation Introductions 21 NICAM (Optional) Press the NICAM/A2 button: Usually set to stereo to provide the best reproduction, but if reception deteriorates or if the service is not available then switch to Mono. Mono (MI) and (M2) can also be selected if a mono signal is being transmitted.
Help 22 Check PC or the connected device for correct frequency and bandwidth Check if selected input source and connection Remote is too far away from TV or the angel is too sharp Check if there is ob.
Specifications 23 LCD: View angle: PC input: Resolution: TV system: Channel amount: Input: Speaker: ANTENNA: Power supply: Power Consumption: Accessories 81cm LCD Horizontal view angle: 176 Vertical v.
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888.
An important point after buying a device Palsonic TFTV836BK (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Palsonic TFTV836BK yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Palsonic TFTV836BK - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Palsonic TFTV836BK you will learn all the available features of the product, as well as information on its operation. The information that you get Palsonic TFTV836BK will certainly help you make a decision on the purchase.
If you already are a holder of Palsonic TFTV836BK, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Palsonic TFTV836BK.
However, one of the most important roles played by the user manual is to help in solving problems with Palsonic TFTV836BK. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Palsonic TFTV836BK along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
