Instruction/ maintenance manual of the product TFTV683HD Palsonic
Go to page of 37
OWNER'S MANUAL 6 6 C M W I D E S C R E E N L C D T V / M O N I T O R M O D E L : T F T V 6 8 3 H D P ALSONIC CORPORA TION PTY L TD 1 JOYNTON A VENUE W A TERLOO NSW 2017 AUSTRALIA TEL:(02)9313 71 .
IMPORT ANT INFORMA TION If a television is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as: ! Using cabinets or stands recommended by the manufacturer of the television.
T able of Contents Important Safety Precautions..........................................................................................................................1 Important Notice ...............................................................
1 Important Safety P recautions Electrical energy can perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety .
Important Safety P recautions (Continued) 2 15. Stand ---Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer , or sold with the apparatus.
Do not use in hot and cold rooms (locations) ! When the unit is used in rooms (locations) with low temperature, the picture may leave trails or appear slightly delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.
< Use the remote control by pointing it towards the remote sensor window of the set. Objects between the remote control and sensor window may prevent proper operation. Cautions regarding use of remote control < Do not expose the remote control to shock.
5 75-ohm coaxial cable (round cable) INST ALL th e unit in a ro om where dire ct ligh t will not fall upon th e screen . T otal da rkness or a refl ecti on on the pictur e scre en may cause ey estrai n. Soft and indi rect lighti ng is re commen ded fo r comf ortabl e view ing.
6 Functions of CH+/-, VOL+/-, MENU, SOURCE and POWER are also provided to the remote control. This operation manual provides a description based on operating functions with the remote control. Main Unit (front view/side view) Note Identification of Controls 1 8 5 7 6 4 2 3 1.
7 Main Unit (rear view) Identification of Controls (Continued) 6 2 3 4 8 5 7 1 1. 2. 3. 4. 5. 6. 7. 8. Antenna input Connect to your cable system or outdoor antenna. RS232 interface For service use . The user cannot operate the unit through this terminal.
Remote Control Unit Identification of Controls (Continued) POWER: Switches the TV power on or Standby . TV/Radio: Switches between TV and R adio mode. (DTV only) EPG: Displays the Electronic Program Guide (DTV only). FA V .LIST : Displays the favorite channel list.
Carefully check the terminals for position and type before making any connections. The illustration of the external equipment may be different depending on your model. Loose connectors can result in image or color problems. Make sure that all connectors are securely inserted into their terminals.
10 Connecting Component Video Connections (Continued) T o connect a device using component video: 1. T urn on your TV , then press SOURCE button. The Input Source menu opens. 2. Press 5 or 6 to select Component , then press OK to confirm. 3. T urn on your external device and set it to the correct mode.
11 Connections (Continued) Connecting an HDMI device Connect the HDMI cable between the HDMI interface on the unit and HDMI output on the device. T o play from the device using HDMI: How to connect a device using HDMI Connection: 1. T urn on your TV , then press SOURCE button.
12 Connecting Digital Coaxial Audio Connections (Continued) TV Left Side The S/PDIF OUT jack is available only when a digital TV channel is received. Note S / PDIF IN (Coaxial) Coaxial audio cable Aud.
1 3 With the power on, press MENU and the main menu screen displays. Within the menu, press 5 , 6 , 3 or 4 to navigate through the options or adjust an option. Press OK to confirm a selection or enter a sub-menu. Press 3 or 4 to select menu. P ress 6 to access the menu .
Basic Operations (Continued) Displaying the Information Banner Press the INFO button to display the information banner . The information banner displays current status information such as the channel number and signal source. Depending on the mode, different information is displayed.
Memorizing the Channels When you turn on the TV for the first time, you should perform an auto channel search to set up stations on your TV . Note : Be sure to select the proper input source (A TV/DTV) before operation . 1 Highlight VHF CH (or UHF CH ) item, press 3 or 4 button to select your desired channel number .
1 Highlight Storage T o item, press 3 or 4 button to select a channel position in which you want to store. In Channel menu, press 6 or 5 to select A TV Manual T uning item, then press 4 or OK to access. 2 If desired analog programs cannot be searched by Auto T uning, you can make use of A TV Manual T uning to search programs manually .
Memorizing the Channels (Continued) Labeling Channels If required, you can give a name to the programs. 4 Within the program list, press 6 or 5 to select a channel you want to edit, press GREEN button to start to label. Then a name symbol appears alongside.
Memorizing the Channels (Continued) 18 1 Select the channel you want to delete in the Programme Edit menu. Press RED button and a delete symbol appears alongside the selected channel in the list. Press RED button again to finish the delete. T o delete channels This function allows you to delete your unwanted channels.
Channel and P rogram Selection = RECALL will not work if no channel has been changed after TV is turned on. Note Please note: your new TV is capable of receiving both radio and TV broadcasts. And for TV reception, your new TV is capable of receiving both traditional analog channels and digital channels.
Picture Adjustment 20 Customizing the Picture 1 3 Press MENU and the main menu screen displays. Within the menu, press 5 or 6 to scroll through the page upward or downward, and press 5 , 6 , 3 , 4 to navigate through the options or adjust an option. Press 3 or 4 to select Picture menu, press 6 to access the menu .
Sound Adjustment 21 Press the V OL + or V OL- to increase or decrease the volume. Press the MUTE button to temporarily turn off all sound. T o restore the sound, press the MUTE button again. Adjusting the Sound 1 3 Press MENU and the main menu screen displays.
Sound Adjustment (Continued) Stereo/Bilingual Selection (for analog channels) Y ou can quickly select sound multiplex mode by using the STEREO button on the remote control. This enables the selection of the reception mode when receiving a NICAM signal.
Picture Sound Time Option Lock Channel Select Move Menu Exit Hearing Impaired Off SPDIF Auto Audio Preference Dolby Digital Language English System Setup System Setup 1 3 Press MENU and the main menu screen displays. Within the menu, press 5 , 6 , 3 , 4 to navigate through the options or adjust an option.
Block Program Setup 1 3 2 The Block Program function blocks any channels that you do not want to watch or that you do not want your children to watch. Navigate to the Lock menu and input the correct password to access. Use 5 or 6 to highlight Block Program item, press 4 or OK to access.
R ating and Lock Setup (Continued) Lock T uning Setup Making use of Lock T uning you can protect some TV settings from being accidentally changed. 1 Navigate to the Lock menu and input the correct password to access. No w the Lo ck T un in g i te m w il l b e hig hl ig ht ed au to ma ti ca ll y .
Timer Setup 26 Time Zone Selection 1 3 Press MENU and the main menu screen displays. Press 5 or 6 to select Time Zone item, and then press 3 or 4 to select the appropriate one.
Off Timer Setup 1 3 Na vi ga te to th e Tim e men u, p re ss 6 t o a cc es s . Now the Activate item will be highlighted automatically , press 3 or 4 to select On . (If you want to cancel setting, please choose Off ) Press 5 or 6 to select Off Time item, press 4 or OK to access the submenu.
EPG Operation EPG The Electronic P rogramme Guide (EPG) makes it possible for users to see details about the programme they are watching, other programmes and even a schedule of the next 7 days. The information available includes the number and name of the channel, the name and type of programme, the start and end time, and a summary .
T eletext T eletext & Subtitle Select a TV channel providing the T eletext program. Press TTX button to display the teletext. Press TTX button again to switch back to TV screen. Y our System receives T eletext signals broadcast by a TV network, and decodes them into graphical format for viewing.
Screen Setup for D -SUB(PC) Mode Before adjusting the screen, make sure that you select the correct source (D-SUB). 30 Option Description Auto adjust Horizontal P osition Size Phase Selects and activates to start auto adjustment. The set automatically adjusts the image settings, such as position and phase.
Remote Control If , after reading these operating instructions, you have additional questions related to the use of your television, please call the services center in your local area. Before calling service, please check the symptoms and follow suggested solutions.
T roubleshooting General Problem P ossible Solutions One or some channels can ’t be displayed ! These channels may be locked. Please unlock them (see <Rating and Lock Setup> section). ! These channels may be set skipped in the channel list. Y ou may set it to not skipped or select them with 0-9 number buttons.
T ype: LCD TV Display Size diagonal: 26” P ower Supply: AC100-240V 50/60Hz P ower Consumption: 90W Dimensions(mm): 673 (W) x 488(H) x 255(D) Unit W eight(kg): 10 Specifications ! Design and specifications are subject to change without notice.
5944034810 P ALSONIC CORPORA TION PTY L TD 1 JOYNTON A VENUE W A TERLOO NSW 2017 AUSTRALIA TEL:(02)9313 71 1 1 F AX:(02)9313 7555 P ALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA:1300 657 888 V er 1 .
An important point after buying a device Palsonic TFTV683HD (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Palsonic TFTV683HD yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Palsonic TFTV683HD - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Palsonic TFTV683HD you will learn all the available features of the product, as well as information on its operation. The information that you get Palsonic TFTV683HD will certainly help you make a decision on the purchase.
If you already are a holder of Palsonic TFTV683HD, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Palsonic TFTV683HD.
However, one of the most important roles played by the user manual is to help in solving problems with Palsonic TFTV683HD. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Palsonic TFTV683HD along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
