Instruction/ maintenance manual of the product 6850TGPF Palsonic
Go to page of 34
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 68CM C.
Congratulations on your purchase of this Palsonic colour television. We recommend that you thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this equipment. Retain this manual in an easily accessible location for future reference.
1 Hyperband Automatic channel preset Full function remote control AV input/output (RCA) jacks DVD input (RCA) jacks Selectable picture and selectable sound Teletext ON Timer, OFF Timer Real Clock (wit.
2 When any unusual situation occurs, turn off the power supply at once and remove the plug from the wall outlet. Contact a qualified service department in your local area. When cleaning dust off the picture tube disconnect the power first. You can wipe lightly with a piece of dry, clean and soft cloth.
3 Don't overload wall outlets; extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. Do not cover the ventilating hole in the cabinet Keep a space of more than 10cm from the walls to the TV set to ensure adequate ventilation.
Back Identification of Controls 4 Front Power Switch Indicator Remote Sensor CHANNEL DOWN VOLUME DOWN MENU CHANNEL UP VOLUME UP AV/TV AV/TV MENU CH- CH+ VOL- VOL+ AV2 input (VIDEO, AUDIO (L/MONO, R)) .
Retain on-screen display YELLOW (teletext) Remote controller Red (teletext), Enter into Hotel mode (Option button, in some model it can not act) Real clock (teletext) Power on/standby Reveal/conceal (.
Notes: 6 Optimum reception of colour requires a good signal and will generally mean that an outdoor aerial must be used. The exact type and position of the aerial will depend upon your particular area. It is recommended that the 75-ohm coaxial cable be used to eliminate interference and noise which may occur due to radio wave conditions.
Install two "AAA" batteries matching the +/- polarities of the battery to the +/- marks inside the battery compartment. 7 Installing batteries Do not try to recharge batteries that are not intended to be recharged. Use only the size and type of batteries specified.
Using the side AUDIO/VIDEO Jacks 8 The optimal use for the side A/V jacks are to connect an A/V component that is used only occasionally, such as a camcorder or video game. Connect the Audio/Video output jacks of the external unit to the Audio Input jacks and the Video Input jacks.
Using the rear AUDIO/VIDEO input Jacks 9 You can connect video equipment such as a VTR and video camera to this TV and enjoy the high quality pictures and sound.
Using the AV Outputs 10 External equipment connections You can connect a stereo system to the AV output jacks on the TV set rear to enjoy a high-quality sound from the stereo system, or you can connect the AV output jacks to the VTR to record the program you like.
Turning on 1 11 1 2 0-9 digit buttons 2 Press the Power Switch on the TV set. Now the standby indicator lights up, the TV set is in STANDBY mode. Now please follow step 2. In STANDBY mode, press the button or 0-9 digit button on the remote controller and the TV set is turned on.
Watching AV program 12 1 This TV set provides AV and DVD input terminals for your convenient connection to VCR, DVD or other video equipment. To watch video program from AV inputs or DVD inputs, Press 0/AV button repeatedly until you see the appropriate input indicator on the screen.
Automatic Tuning 3 13 1 2 Program 1 48 MHz >> Automatic tuning * To exit the menu, press OK button. Press MENU repeatedly to display Program menu. Press CH+ or CH- to select Automatic tuning . Press VOL+ to start automatic tuning. All active channels will be preset and stored into memory automatically.
Manual tuning 3 14 1 2 4 5 * To exit the menu, press OK button. If automatic tuning can not preset the desired channels, or you want to preset the desired channels one by one with the preferred channel numbers, please make use of Manual tuning. Repeatedly press MENU to enter into Program menu.
Fine tuning Fine tuning is not necessary under normal conditions. However, in area of inferior broadcast conditions where adjustment is necessary for a better picture and sound, use Fine tuning. Select a channel you want to fine-tune (for example: channel 3).
Language Blue back Rotate Child lock Color system Sound system Special functions + - P+ P- English On 50 Off Auto B/G Setting Sound System Setting Colour System 3 16 1 2 1 2 * To exit the menu, press OK button.
Program delete 3 17 1 2 5 6 * To exit the menu, press OK button. After presetting the channels, you may delete unnecessary programs so that only the programs you want to watch are selected. Use digit buttons or channel up/down button to select a program you want to delete (for example: program 3 ).
Program name Program sort 18 * To exit the menu, press OK button. 3 1 2 If required, you can give a name to the programs. Note: If current program is Teletext, it can be automatically named by the unit according to its information. In Program menu, highlight Program 003 , press VOL+ button and a small block appears near 003.
Notes: Use on-screen display button ( ) to know the current channel number + 3 19 1 2 Use Direct Channel Select buttons To select one-digit channel: Press --/--- button to display "-", then input the number. To select two-digit channel: Press --/--- button to display "--", then input the number.
Picture quality Display normal pictures Display more brightness and contrast pictures Display mild pictures The picture quality you set To select the picture mode 3 20 1 2 * To exit the menu, press OK button. You can select the picture quality instantly among three preset modes and one user-set mode.
Press VOL+/- to adjust the level. Adjusting volume 3 21 1 2 2 1 Use VOL+ or VOL- button. Press VOL+ button, the volume increases; Press VOL- button, the volume decreases. Use MUTE button. If you want to mute the sound, press button on the remote. To resume the sound, press this button again.
Sound mode selection 22 * To exit the menu, press OK button. SM (sound mode select) ? + - + - + SOUND S.M P .M HOTEL LOCK --/ --- OK MENU 2 5 6 3 9 8 7 4 1 0 /A V + - VOL + VOL CH CH - i Enter into earphone state Sound controls You can select the sound quality instantly among three preset modes and one user-set mode.
Setting clock 3 23 1 2 * To exit the menu, press OK button. 2 Use digit buttons to input the current time for the set. If wrong in setting the time, press RED button to cancel and input again. Press MENU button repeatedly to display Timer menu. Press CH+/ - to select Clock.
To turn on the TV automatically (ON timer) 3 24 1 2 * To exit the menu, press OK button. 4 With the ON timer, the TV will automatically turn on to a preset channel at a preset time. In Timer menu, press CH- to select Timer on . Use Digit Buttons to set ON time.
To select OSD language 3 25 1 2 * To exit the menu, press OK button. There are multi OSD languages in this TV set provided for you to select (OSD: on-screen display): Press MENU repeatedly to display Special functions menu. Now the first menu item is highlighted and indicates the current selected OSD language.
Child lock setting 3 26 1 2 4 * Child lock is an optional function. Making use of child lock function, you can lock all the programs to prevent children from viewing them. Press LOCK button on the remote control, the Lock menu bar appears. (or press MENU repeatedly to display Special functions menu.
Hotel ------ Hotel *****- Hotel Off New ------ New ------ ? Hotel lock setting 3 27 1 2 1 Making use of hotel lock function, you can limit some functions so that other user can not change your settings. This function is especially useful in hotel. Press HOTEL button on the remote control, the screen will display "Hotel ------" .
Teletext 28 Teletext is an optional function, therefore only a set with the teletext system can receive the teletext broadcast. Switching Teletext on/off Press button once to switch on teletext. Press button twice both teletext and TV program are displayed.
Only some buttons have function while others can not act, and the volume is limited. 29 Before calling service personnel, please check the following chart for a possible cause to the trouble you are experiencing. Power is not turned on Poor colour poor tint Be sure the power cord is plugged in.
30 Reception disturbances Most types of television interference can be remedied by adjusting the height and position of the VHF/UHF antenna. Outdoor antennas are recommended for best results if not using cable. The most common types of television interference are shown below.
Specifications 31 Note : Design and specifications are subject to change without notice. CATV Power Supply: Power Consumption: Dimensions (mm): Weight (kg): CRT: AC 100-240V, 50Hz 180W 762 (W) x 580 (.
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 604-TA29663-00 Ver.
An important point after buying a device Palsonic 6850TGPF (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Palsonic 6850TGPF yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Palsonic 6850TGPF - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Palsonic 6850TGPF you will learn all the available features of the product, as well as information on its operation. The information that you get Palsonic 6850TGPF will certainly help you make a decision on the purchase.
If you already are a holder of Palsonic 6850TGPF, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Palsonic 6850TGPF.
However, one of the most important roles played by the user manual is to help in solving problems with Palsonic 6850TGPF. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Palsonic 6850TGPF along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
