Instruction/ maintenance manual of the product 6825G Palsonic
Go to page of 31
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL:(02)9313 7111 FAX:(02)9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA:1300 657 888 68CM CORDLE.
Contents Congratulations on your purchase of this Palsonic colour television receiver. We recommend that you thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this receiver. Retain this manual in an easily accessible location for future reference.
Clock/Game/Calendar Intellectualized remote controller caller Hyperband 256 preset channels Full function remote control AV input & output terminals, DVD input terminals Automatic channel preset O.
Important Safety Cautions When any unusual situation occurs, turn off the power supply at once and remove the plug from the wall outlet. Contact a qualified service department in your local area. Do not expose the TV set to rain or excessive moisture.
! This TV set can operate on an AC power of 240V, 50HZ. You must not use a power supply of any other type. High voltage exists in this TV set. Do not remove the cover 5 Do not cover the ventilating hole in the cabinet Keep a space of more than 5cm from the walls to the TV set to ensure adequate ventilation.
1. TV/VIDEO input select. 2. Volume up; menu item adjust. 3. Volume down; menu item adjust. 4. To enter menu operation. 5. Channel up; menu item select.
Back 5 1. Antenna input. 2. DVD inputs (VIDEO: Y, C , C , AUDIO L/MONO, R). 3. AV 2 inputs (VIDEO, AUDIO L/MONO, R). 4. S-VIDEO input. 5. AV outputs (VIDEO, AUDIO L/MONO, R).
6 Identification of Controls (continued) Remote Controller Direct channel selector The switch of the remote controller caller Power on/standby TV/VIDEO input select Colour and sound system select Volu.
! Install two "AAA" batteries matching the +/- polarities of the battery to the +/- marks inside the battery compartment. Replace the battery cover. Notes: The battery life should be about one year under normal use. Do not try to recharge batteries not intended to be recharged.
Notes: It is recommended that the 75-ohm coaxial cable be used to eliminate interference and noise which may occur due to radio wave conditions. The aerial cable should not be bundled with the power cord and the like. 8 Installation ! INSTALL the unit in a room where direct light will not fall upon the screen.
Using AV Inputs This TV set provides 3 groups of AV input (including one group of DVD inputs) and 1 group of AV out puts for your convenient connection to VTR, DVD or video camera to enjoy the high quality picture. Please refer to the owner's manual of the equipment to be connected as well.
Using DVD inputs 10 Installation (continued) Using AV outputs.
Turning on/off 11 2 1 Turning off ! Press the Power Switch on the TV set. The TV set is in STANDBY and the Yellow indicator lights up. In STANDBY mode, press the button or 0-9 buttons on the remote controller and the TV set is turned on. In STANDBY mode, you can also press the VOL , CH or TV/AV button on the set to turn on.
2 1 Switching from AV to TV ! To watch video program from AV input, PressTV/AV button repeatedly until you see the appropriate input indicator on the screen Notes: In AV1 inputs, the S-VIDEO terminal is prior to the VIDEO1 terminals. When both S-video and video signal are input, the S- video signal is selected (the OSD is "S-VIDEO1").
Tuning in 13 2 1 Auto Search Press MENU button. Press VOL+ or VOL- button to select SEARCH icon. Press CH- button to disply the Serach menu. Press CH+ or CH- button to select AUTO MEMORY item.
2 1 To skip an unnecessary channel ! Press CH+ or CH- button to select POSITION item. Notes: You can use BAND selection to quicken search process if you know which band your desired progam locates in.
Calling the on-screen display Press CH+ or CH- button to select POSITION item. You can call the on-screen display by pressing the DSP button on the remote controlle. The first press of the DSP button display the current state (if in TV mode, the current channel number will display) and the next press display the clock time.
Using 0-9 direct channel selector There are 2 ways for you to select a two-digit channel number, for example, channel 19 as follows Channel Selection 16 1 2 1, 1 3 4 There are 3 ways for you to select an one-digit channel number, for example, channel 9 as follows.
Adjusting Picture 17 2 1 Setting blue background Press MENU button. Press VOL+ or VOL- button to select PICTURE icon. Press CH- button to disply the PICTURE menu. Enter the PICTURE menu according to the above steps 1-3. Press CHL+ or CH- button to select B.
Selecting sound mode ! Use VOL+ or VOL- button. Notes: Sound Control 18 Adjusting volume 1 2 S.M Press VOL+ button, the volume increases; Press VOL- button, the volume decreases. Use MUTE button. 2 If you want to mute the sound, press MUTE button on the remote.
Setting BALANCE Press MENU button. 19 Setting WOOFER 1 4, 2 2 Press VOL+ or VOL- buttons to select SETTING icon. 3 4 Press CH- button to display the SETTING menu. Press CH+ or CH- button to select WOOFER item. 2,5, 3 5 Press VOL+ or VOL- button to select ON or OFF.
Setting sleep timer Press MENU button. You can quickly set the sleep timer by using the SLP button on the remote controller. With every press of this button the sleep time changes as follows; Timer Setting 20 To enter the TIMER menu 1 1 Please enter the TIMER menu first.
Setting ON TIMER Press CH+ or CH- button to select OFF TIMER item. 21 Setting OFF TIMER 1 1,3 1,3,5 2 Press VOL+ or VOL- button to select ONCE or EVERY. 3 4 Press CH- button. Press VOL+ or VOL- button to set the OFF time, for example 22:00. 2,4 2,4,6 2 1 Press CH+ or CH- button to select ON TIMER item.
Setting the colour and sound system Press MENU button. If the picture colour or sound is abnormal, maybe the colour and sonund system setting is wrong. You can select a proper colour or sound system as follows; System Setting 22 To enter the Setting menu 1 1,3 Please enter the SETTING menu first.
Channel scanning Press EDIT button on the remote controller. 23 Channel Edit 1 2,4,6 2 Press CH+/- to select CHANNEL 1 item. 3 4 Press VOL+/- to select the first target channel. Press CH+/- to select CHANNEL 2 item. 3,5,7 Press SCAN button on the remote controller and the TV set begins program scanning.
Playing GOBANG game Press CH+ or CH- button to select BOX item. Press any one of F1, F2 or F3 buttons to start the game. Press F1 to transform the shape; F2 to accelerate falling down; F3 to move the boxes. When the boxes are placed fully in one row, this row will disappear and the score increases 1 point.
Press any button except , , or to exit calendar. Remote controller caller Press CH+ or CH- button to select CALENDAR item. This TV set provides RC (remote contrller) calling function, which wil help you to find the RC if you do not know where the RC is.
Playing SLOT game Press MENU button. Press F1 button to start the game. The 1-9 digit buttons on the remote controller match the 9 target boxes on the screen. Pressing any one of these buttons can hit the relevant box, The score will be counted according to the amount of the box hit within the stipulated time.
Remote controller does not work Unevenness in colour in some parts of the screen Remote controller plays music continually or makes "Beep" sound Before calling service personnel, please check the following chart for a possible cause to the trouble you are experiencing.
! TV system & channel range Power Supply: Power Consumption: Dimensions(mm): Weight(kg): CRT: AC 240V, 50Hz 140W 670(W) x 688(H) x 510(D) 43 68cm System PAL-B/G VHF 2-12 UHF 21-69 CATV X~Z+2,S1~S4.
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL:(02)9313 7111 FAX:(02)9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 604-K29183.
An important point after buying a device Palsonic 6825G (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Palsonic 6825G yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Palsonic 6825G - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Palsonic 6825G you will learn all the available features of the product, as well as information on its operation. The information that you get Palsonic 6825G will certainly help you make a decision on the purchase.
If you already are a holder of Palsonic 6825G, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Palsonic 6825G.
However, one of the most important roles played by the user manual is to help in solving problems with Palsonic 6825G. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Palsonic 6825G along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
