Instruction/ maintenance manual of the product 3435TS Palsonic
Go to page of 29
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 34CM C.
Congratulations on your purchase of this Palsonic colour television receiver. We recommend that you thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this receiver. Retain this manual in an easily accessible location for future reference.
Contents Features ........................................................................................................................ Important Safety Cautions ......................................................................................
Features 1 USOC and Intellectualized I 2 C-bus control Five picture modes Two groups of Video/Audio input terminals Program exchange/Program copy Game/Calendar Child lock function 200 channels Music T.
2 Important Safety Cautions When any unusual situation occurs, turn off the power supply at once and remove the plug from the wall outlet. Contact a qualified service department in your local area. When cleaning dust off the picture tube disconnect the power first.
Don't overload wall outlets; extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. 3 This TV set can operate on a power of ~240V, 50Hz.
Identification of Controls 4 1. MENU button: To enter into menu operation. 2. CH- button: channel down select; menu item select. 3. CH+ button: channel up select; menu item select. 4. Remote Sensor 5. VOL- button: volume down adjust; menu item adjust.
5 1. AV2 input (VIDEO, AUDIO) 2. AV1 input (VIDEO, AUDIO) 3. Antenna input Back view 2 (1) VIDEO AUDIO 3 1 (2) VIDEO AUDIO.
Identification of Controls (continued) 6 Power on/standby Direct Channel select TV/VIDEO Input select Channel up/menu item select Volume down/menu item adjust To enter into music TV mode Scanning prog.
7 Open the battery cover. 1 Battery Installation Install two "AA" batteries matching the +/- polarities of the battery to the +/- marks inside the battery compartment. 2 Replace the battery cover. 3 Notes: 1. When the remote control will not be used for a long period of time or when the batteries are worn out, remove the batteries.
Installation 8 Optimum reception of colour requires a good signal and will generally mean that an outdoor antenna must be used. The exact type and position of the antenna will depend upon your particular area. Turn off the power first, when you connect an outdoor antenna to the antenna input terminal.
9 Connecting to video and audio equipment Connecting the side AV input terminals This TV provides 2 groups of AV input terminals for your convenient connection to VCR, DVD or other video equipment to enjoy the high quality picture. Please refer to the owner's manual of the equipment to be connected as well.
Menu Introduction 10 Press the MENU button repeatedly to select the screen display as below. In menu operation, press CH+/- to select item, press VOL+/- to adjust selected item.
Turning On/Turning Off 11 Press the MAIN POWER SWITCH to turn on the TV set. If no picture appears, then the TV set is in STANDBY mode. Press , CH+/- or 0-9 buttons (one digit only) on the remote control, then the TV set is turned on. When the remote control is not at your hand, you can also press the CH+/- buttons on the TV set to turn on the TV.
Presetting programs 12 Firstly, use the Auto search function to preset all active channels in your area automatically. Then arrange the preset channels with the manual search and program edit functions. Press the MENU button to select PRESET menu. Press CH+/- to select AUTO SEARCH .
Presetting programs (continued) 13 When picture and sound's effect of a channel is poor (for example: one or two CATV channel's picture and sound are not standard), you can correct them by making use of Fine tuning.
Editing programs 14 Classifying programs After presetting the channels, you can skip unnecessary position numbers so that only the channels you want are selected. Access the PRESET menu, then select PROGRAM item by CH+/- and set the desired channel number (from 0~199) by VOL+/- or Digit buttons.
Editing programs (continued) 15 Press MENU button repeatedly to access the SW AP menu. Select PROGRAM item and select a channel number A by Digit buttons. Select EXCHANGE item and press Digit buttons to set another channel number B that you would like to exchange with the program number which is displayed in the PROGRAM item.
Selecting Channel/input signal 16 Use Digit buttons To select one-digit channel To select two-digit channel To select three-digit channel Note: The maximum channel number is 199, the set does not act if the channel number you input is out of the range of 0~199.
Adjusting the picture/sound 17 Using the PP button: You can press PP button to select the desired picture mode: MILD , STANDARD , NATURE , CUSTOM , COLORFUL . Using the PICTURE menu: Press MENU button or PIC button to access the PICTURE menu. Press PIC button repeatedly or press CH+/- buttons to select item upwards or downwards.
Clock Setting 18 Press MENU button repeatedly to access the CLOCK menu. Select TIME item. Note: The ON-TIME and OFF-TIME can be set only after you finish setting the TIME item. Press VOL- button to set the hour (0~23). Press VOL+ button to set the minute (0~59).
19 Select CH-TIME item. Set the CH-TIME. Press VOL- to set Press VOL+ to set minute (0~59). Select PROGRAM item. Set the channel number by Digit or VOL+/- buttons. The TV set will switch to the preset channel when the CH-TIME elapses. Select MESSAGE item.
System Setting 20 With the background function ON , when no signal is being received, a preset background and customer's logo will appear. Press VOL+/- buttons to select ON or OFF . Access the SYSTEM1 menu. Press CH+/- buttons to select BACKGROUND item.
Other functions introduction 21 There is a built-in game (Falling cube) for you to play. Press GAME button to access game interface. On the screen, there are falling cubes.
22 Noise Reduction setting You can watch wide picture (such as 16:9) in V-ZOOM mode. Access the SYSTEM2 menu. Press CH+/- buttons to select ZOOM item. Press VOL+/- buttons to select ON to active the V-ZOOM mode. In the normal mode, it should be set to OFF .
23 If you only want to listen to the music, you can press MUSIC button and the screen displays MUSIC TV . Five seconds later, the screen is blank while the sound is normal. Press any button on the remote control to exit MUSIC mode. Press SCAN button to scan the program from current channel to higher channel one by one.
Troubleshooting Guide 24 Before calling service personnel, please check the following chart for a possible cause to the trouble you are experiencing. Unevenness in colour in some parts of the screen. When the set is switched on, do not shift or move the set around.
Specifications 25 TV system & channel range Power Supply: Power Consumption: Dimensions (mm): Weight (kg): CRT: AC 240V, 50Hz 60W 350(W) x 330(H) x 365(D) 12 34cm SYSTEM PAL-B/G VHF 2-12 UHF 21-69.
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 604-TS14373-00 Ver 1.
An important point after buying a device Palsonic 3435TS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Palsonic 3435TS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Palsonic 3435TS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Palsonic 3435TS you will learn all the available features of the product, as well as information on its operation. The information that you get Palsonic 3435TS will certainly help you make a decision on the purchase.
If you already are a holder of Palsonic 3435TS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Palsonic 3435TS.
However, one of the most important roles played by the user manual is to help in solving problems with Palsonic 3435TS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Palsonic 3435TS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
