Instruction/ maintenance manual of the product C3 Packard Bell
Go to page of 22
Packard Bell EasyNote C3 Disassembly Manual Packard Bell EasyNote C3 Disassembly Manual 1.
Packard Bell EasyNote C3 Disassembly Manual 2 Table of contents Overview .................................................................................................................................................................3 Technician Notes .
Packard Bell EasyNote C3 Disassembly Manual 3 Overview This document contains st ep-by-step disa ssembly instruct ions for the EasyNote C3 chassis. The instructio ns are illustrated where necessa r y with images of the part that is being removed or disassembl ed.
Packard Bell EasyNote C3 Disassembly Manual 4 Hazardous Voltage There is hazardous voltage present insi de the computer when it is connected to an AC supply, even when the computer’s power switch is off. Exposure to hazardous voltage could cause personal injury.
Packard Bell EasyNote C3 Disassembly Manual 5 Removing the Battery Perform the following steps to remove t he battery: 1. Make sure to power off the EasyNote C3 . 2. Turn the unit upside down. 3. Unlock the battery and slide it out of its place as the arrow shows in Fig.
Packard Bell EasyNote C3 Disassembly Manual 6 2. Unclip the memory module as shown in Fig. 3 Fig. 3 Removing the memory module 3. Remove the memory module from its slot and put it aside. Removing the Hard Disk Drive To remove the hard disk drive, first remove the battery (see Removing the Battery ), then perform the following steps: 1.
Packard Bell EasyNote C3 Disassembly Manual 7 Fig. 5 Screws retaining the HDD assembly Removing the Keyboard To remove the Keyboard, first remove the battery (see Removing the Battery ), then perform the following steps : 1. Release the keyboard cover from the rear of the system as shown in Fig.
Packard Bell EasyNote C3 Disassembly Manual 8 3. Lift up the keyboard and disconnect it fr om the system as shown in Fig. 8 Fig. 8 Disconnecting the keyboard flat cable.
Packard Bell EasyNote C3 Disassembly Manual 9 Removing the Optical Disk Drive To remove the ODD, first remove the battery (see Removing the Battery ) and remove the keyboard (see Removing the Keyboard) then perfo rm the following steps: 1. Remove the screws retaining the opt ical disk drive as shown in Fig.
Packard Bell EasyNote C3 Disassembly Manual 10 Removing the LCD Module To remove the LCD Module first remove the battery (see Removing the Battery ) and remove the keyboard (see Removing the Keyboard ), then perform the followin g steps: 1. Remove the screws retaining the He at Plate as shown in Fig.
Packard Bell EasyNote C3 Disassembly Manual 11 4. Open up the LCD lid, release the screws and the LCD cable connector. Fig. 14 Removing the screws retain ing the LCD Cable Connector 5.
Packard Bell EasyNote C3 Disassembly Manual 12 Removing the LCD Panel To remove the LCD panel, first remove the LCD module (see Removing the LCD Modul e ), then perform the following steps: 1. Use a pin to remove the rubber covers on the LCD module a s sho wn in Fig.
Packard Bell EasyNote C3 Disassembly Manual 13 Fig. 17 Removing the LCD Panel hinges Removing the CPU To remove the CPU first remove the battery (see Removing the Battery ) and remove the Keyboard (see Removing the Keyboard ), then perform the following step s: 1.
Packard Bell EasyNote C3 Disassembly Manual 14 3. Unscrew the screws on t he CPU Heat Sink as shown in Fig. 20, and take out the CPU heat sink. F ig. 20 Removing the CPU heat sink screws Note: Beware of screws use on the CPU heat sink! Make sure to use the scre w size M2.
Packard Bell EasyNote C3 Disassembly Manual 15 Note: Use extra care when unlocking or loc k ing the CP U because the scre w driver might cause damage on CPU’s edge each time when unlockin g or locking the CPU.
Packard Bell EasyNote C3 Disassembly Manual 16 2. Release all screws on the top cover as sho wn in Fig. 23 Fig. 23 Top Cover scre ws 3. Disconnect the Touch Pad Conne ctor a s shown in Fig. 24 Fig. 24 Touch Pad connection 4. Carefully lift up the Top Cover.
Packard Bell EasyNote C3 Disassembly Manual 17 Removing the Touch Pad To remove the touch pad, first remove the top cover (see Removing the Top Cov er ), then perform the following steps: 1. Unscrew the screws on the Top Cove r as shown in Fig. 25 Fig.
Packard Bell EasyNote C3 Disassembly Manual 18 2. Unscrew all screws on the HDD hol der as shown in Fig. 27 and separate it carefully from the Main Board. Fig. 27 Screws on the HDD holder 3. Disconnect Speaker and Li d switch connectors from the Main boa rd and unscrew the screws encircled in Fig.
Packard Bell EasyNote C3 Disassembly Manual 19 4. Lift up the Main Board as shown in Fig. 29 and put it aside. Fig. 29 Lifting up carefully the main board Removing the MDC Modem To remove the MDC Modem, first remov e the Main Board (see Removing the Main Board ) then perform the following steps: 1.
Packard Bell EasyNote C3 Disassembly Manual 20 Removing the Speaker Assembly To remove the Speaker Assembly, first remove the Main Board (see Removing the Main Board ) then perform the following step s: 1. Remove the screws holding the Speak e r Assembly a s shown in Fig.
Packard Bell EasyNote C3 Disassembly Manual 21 Fig. 33 Dip Switches settings Screws.
Packard Bell EasyNote C3 Disassembly Manual 22 Notice The information in this guide is subject to change without notice. This guide contains information prote cted by copyright. No part of this guide may be photocopied or rep ro duced in any form or by any means without prior writt en consent from NEC Computers International BV.
An important point after buying a device Packard Bell C3 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Packard Bell C3 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Packard Bell C3 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Packard Bell C3 you will learn all the available features of the product, as well as information on its operation. The information that you get Packard Bell C3 will certainly help you make a decision on the purchase.
If you already are a holder of Packard Bell C3, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Packard Bell C3.
However, one of the most important roles played by the user manual is to help in solving problems with Packard Bell C3. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Packard Bell C3 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
