Instruction/ maintenance manual of the product HCCA 10.2 Orion
Go to page of 26
subw oofer 10.2 10.4 12.2 12.4 15.2 15.4 HCCA 10.2 10.4 12.2 12.4 15.2 15.4 HCCA.
T ABLE OF CONTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Practice Safe Sound™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INTRODUCTION Thank you for your purchase of the Orion HCCA SubW oofers. These woofers represent a combination of incredible performance and value. The HCCA series subwoofers feature a massive 4" voice coil and triple stacked magnet assembly to maximize excursion and output.
TOOLS OF THE TRADE Listed are the majority of the tools required to perform the installation. Having the proper tools will make the installation much easier . It is very difficult when you get half way through the installation and discover that you require a specific tool to get yourself through a particular part of the installation.
5 1. Paper dust cap - moisture and UV resistant. 12. V oice coil gap vents. Part of the enhanced voice coil cooling system (forced convection - aluminum heat sinking -shorting rings to reduce inductive heating).
6 RE-CONE KIT A re-cone kit is available for these speakers and can be obtained from your dealer . The part number for each model is listed below . WIRING CONFIGURA TIONS The following illustrations p.
7 Parallel—One Speaker (dual 2 ohm voice coils) One dual 2 ohm voice coil woofer with voice coils in parallel results in a 1 ohm load to the amplifier . 1. Connect the speaker in parallel by connecting the two positive (+) terminals together and the two negative (-) terminals together .
8 Parallel—T wo Speakers (dual 4 ohm voice coils) T wo dual 4 ohm voice coil woofers with voice coils in parallel and the two woofers in parallel results in a 1 ohm load to the amplifier . 1. Connect the speaker in parallel by connecting the four positive (+) terminals together and the four negative (-) terminals together .
9 Parallel—One Speaker (dual 4 ohm voice coils) One dual 4 ohm voice coil woofer with voice coils in parallel results in a 2 ohm load to the amplifier . 1. Connect the speaker in parallel by connecting the two positive (+) terminals together and the two negative (-) terminals together .
10 Series-Parallel—T wo Speakers (dual 2 ohm voice coils) Note: V erify and ensur e that the woofer wiring is connected as shown with the negative connection from the first woofer coil connected to the positive connection of the second woofer coil.
11 Series-Parallel—Three Speakers (dual 4 ohm voice coils) Note: V erify and ensur e that the woofer wiring is connected as shown with the negative connection from the first woofer coil connected to the positive connection of the second woofer coil.
12 Series—One Speaker (dual 2 ohm voice coils) One dual 2 ohm voice coil woofer with voice coils in connected in series results in a 4 ohm load to the amplifier . 1. Connect the woofer in series by connecting the negative (-) of one terminal to the positive (+) terminal of the other coil.
13 Series-Parallel—Four Speakers (dual 4 ohm voice coils) Note: V erify and ensur e that the woofer wiring is connected as shown with the negative connection from the first woofer coil connected to the positive connection of the second woofer coil.
14 Series-Parallel—Four Speakers (dual 2 ohm voice coils) Note: V erify and ensur e that the woofer wiring is connected as shown with the negative connection from the first woofer coil connected to the positive connection of the second woofer coil.
15 2 Amplifiers—One Speaker (dual 2 ohm voice coils) One dual 2 ohm voice coil woofer with each voice coil connected to an individual amplifier , resulting in a 2 ohm load to each amplifier .
2 Amplifiers—One Speaker (dual 4 ohm voice coils) One dual 4 ohm voice coil woofer with each voice coil connected to an individual amplifier , resulting in a 4 ohm load to each amplifier .
ENCLOSURE DESIGN This section gives the basic description for a sealed enclosure. Orion HCCA woofers are designed for sealed enclosures and vented enclosures. Sealed enclosures are generally considered the most versatile for all music types and are the easiest to build.
HCCA 10.2 & 10.4 Sealed Enclosure Recommendations c b —Bo x P ar ts— Bo x Shape – Square Pr ism 1 T op , 1 Bottom depth (c) = 14.5 in. width (b) = 13.5 in. thic kness = 1.0 in. 1 F ront, 1 Bac k height (a) = 11 in. width (d) = 11.5 in. thic kness = 1.
HCCA 10.2 & 10.4 V ented Enclosure Recommendations —Bo x P ar ts— Bo x Shape – Square Pr ism 1 T op , 1 Bottom depth (c) = 15.5 in. width (b) = 14.5 in. thic kness = 1.0 in. 1 F ront, 1 Bac k height (a) = 11.5 in. width (d) = 12.5 in. thic kness = 1.
HCCA 12.2 & 12.4 Sealed Enclosure Recommendations c b —Bo x P ar ts— Bo x Shape – Square Pr ism 1 T op , 1 Bottom depth (c) = 16 in. width (b) = 16 in. thic kness = 1.0 in. 1 F ront, 1 Bac k height (a) = 14.5 in. width (d) = 14 in. thic kness = 14 in.
HCCA 12.2 & 12.4 V ented Enclosure Recommendations —Bo x P ar ts— Bo x Shape – Square Pr ism 1 T op , 1 Bottom depth (c) = 20 in. width (b) = 15.5 in. thic kness = 1.0 in. 1 F ront, 1 Bac k height (a) = 14 in. width (d) = 13.5 in. thic kness = 1.
22 HCCA 15.2 & 15.4 Sealed Enclosure Recommendations c b —Bo x P ar ts— Bo x Shape – Square Pr ism 1 T op , 1 Bottom depth (c) = 20 in. width (b) = 18 in. thic kness = 1.0 in. 1 F ront, 1 Bac k height (a) = 15.5 in width (d) = 19 in. thic kness = 1.
23 HCCA 15.2 & 15.4 V ented Enclosure Recommendations —Bo x P ar ts— Bo x Shape – Square Pr ism 1 T op , 1 Bottom depth (c) = 18 in. width (b) = 21 in. thic kness = 1.0 in. 1 F ront, 1 Bac k height (a) = 15.5 in. width (d) = 19 in. thic kness = 1.
SPECIFICA TIONS Directed Part Number 27302 27304 27307 Model Number 10.2 10.4 12.2 Thiele/Small Parameters Fs (free-air resonance, Hz) 30.78 32.49 22.56 V as (equivalent compliance, cu. ft. 0.564 0.564 1.847 V as (equivalent compliance, liters) 15.98 15.
SPECIFICA TIONS (CONT’D) Directed Part Number 27309 27312 27314 Model Number 12.4 15.2 15.4 Thiele/Small Parameters Fs (free-air resonance, Hz) 23.98 23.72 24.73 V as (equivalent compliance, cu. ft. 1.847 4.01 7.23 V as (equivalent compliance, liters) 52.
NO WARRANTY THIS PRODUCT IS SOLD "AS-IS " DIRECTED ELECTRONICS (hereinafter " SELLER ") MAKES NO WARRANTY of any kind (express, implied or otherwise) in connection with this Product. THIS PRODUCT IS SOLD AS-IS, AND YOU THE PURCHASER ASSUME THE ENTIRE RISK AS TO ITS QUALITY AND PERFORMANCE.
An important point after buying a device Orion HCCA 10.2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Orion HCCA 10.2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Orion HCCA 10.2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Orion HCCA 10.2 you will learn all the available features of the product, as well as information on its operation. The information that you get Orion HCCA 10.2 will certainly help you make a decision on the purchase.
If you already are a holder of Orion HCCA 10.2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Orion HCCA 10.2.
However, one of the most important roles played by the user manual is to help in solving problems with Orion HCCA 10.2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Orion HCCA 10.2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
