Instruction/ maintenance manual of the product 14LD Orion
Go to page of 56
Before operating the unit, please read this manual thoroughly. Operating Instructions 14" LCD TV with DVD Player 14LD TELETEXT Region / Region discs onl y.
W ARNING To prevent fire or shock hazard, do not expose this equipment to rain or moisture. MAINS SUPPL Y This unit is designed to operate from AC 240V 50Hz household mains supply. CAUTION: THIS UNIT IS A CLASS 1 LASER PRODUCT . HO WEVER THIS UNIT USES A VISIBLE LASER BEAM WHICH COULD CA USE HAZARDOUS RADIA TION EXPOSURE IF DIRECTED .
1 FEA TURES CONTENTS PREPARATION PRECAUTIONS ......................................................... 2 LOCATION OF CONTROLS ...................................... 3 REMOTE CONTROL ................................................. 5 POWER SOURCE ....
2 Keep the unit away from flower vases, sink etc. Liquids spilled into the unit can cause serious damages. Switch OFF the Power Supply to the unit and consult a qualified service engineer before attempting to use the unit again. When you leave your home for a long period of time, unplug the AC mains lead.
3 LOCA TION OF CONTR OLS Headphones socket AUDIO (L/R)/VIDEO IN (A V IN 3) sockets PLA Y 1 button ST OP 3 button EJECT 5 button SKIP 7/6 buttons Left Side Right Side DISC slot Standby indicator Remote.
4 LOCA TION OF CONTR OLS (CONTINUED) Rear Cable holder Approx. 15˚ Approx. 5˚ 0˚ Variable TV-screen angle You can adjust the angle of the TV-screen for 5˚ forward or for 15˚ backward from vertical angle.
5 Po w er on/off 11,15,25,27 DISPLA Y Display TV or D VD operation status 16,25 TV/D VD Select to operate TV or D VD 10,11,15,25,26,27 (EJECT) Ejects the disc 27 0-9 Direct channel selection of TV 15 .
6 REMOTE CONTROL Open the battery compart- ment cover in the direction of the arrow. Install two “AAA” batteries (supplied), paying attention to the polarity diagram in the battery compartment.
7 AC adaptor (supplied) AC 240V, 50Hz TO USE A C PO WER 1. Connect the A C mains lead to the A C adaptor . 2. Connect the A C adaptor plug into this unit’ s DC input socket. 3. Connect the A C mains lead into an A C soc ket. 4. The Standby indicator will light.
8 Connect an indoor or outdoor antenna to the antenna socket at the rear panel as shown below. For all antenna circuit problems, please consult your local dealer. ANTENNA CONNECTIONS The type of antenna required depends on the position of your home, its distance from the transmitter and local interference.
9 Using an A V Amplifier with built-in digital surr ound If you are using an Amplifier with a b uilt-in digital surround sound decoder (such as Dolby Digital / DTS / MPEG / etc.), y ou can connect it as sho wn below . Manufactured under license from Dolby Laboratories.
10 or AV1 Input Selection If you connect the unit to a VCR, camcorder or games console, you can select this input by pressing the 0/AV button. 3. To connect the unit to a camcorder Connect the camcorder to the unit as shown. Press the 0/AV button to select AV3 to use the TV as a monitor.
11 PICTURE NICAM AUTO OFF AUDIO LANGUAGE AV COLOUR AUTO LANGUAGE ON/OFF TIMER MENU PRESS: ▲ / ▼ / ENTER / MENU CH TUNING LANGUAGE SETTING This unit has 5 different languages for MENU set up which can be selected through the ON Screen Display: English, German, French, Italian or Spanish.
12 PICTURE NICAM AUTO OFF AUDIO LANGUAGE AV COLOUR AUTO LANGUAGE ON/OFF TIMER MENU PRESS: ▲ / ▼ / ENTER / MENU CH TUNING AUTOMATIC TUNING PRESETTING THE CHANNELS - Automatic tuning The stations will be preset in the order that they appear when the automatic tuning is activated.
13 PICTURE NICAM AUTO OFF AUDIO LANGUAGE AV COLOUR AUTO LANGUAGE ON/OFF TIMER MENU PRESS: ▲ / ▼ / ENTER / MENU CH TUNING PRESETTING THE CHANNELS 2 Press or to select the MANUAL mode, then press ENTER . Press or until the picture appears on screen.
14 PICTURE NICAM AUTO OFF AUDIO LANGUAGE AV COLOUR AUTO LANGUAGE ON/OFF TIMER MENU PRESS: ▲ / ▼ / ENTER / MENU CH TUNING PRESETTING THE CHANNELS TO CHANGE THE CHANNELS EXAMPLE: Changing of channel position from CH2 and CH5. 1 Press MENU . Press or to select the CH TUNING mode, then press ENTER .
15 TV OPERA TIONS 1 Press Power on the top of the unit or remote control to turn on the unit. The standby indicator will go off. Press TV/DVD to select TV mode. Once you have correctly connected and set up the channels on your set, you can view the channels as follows.
16 CONVENIENT FUNCTIONS The following functions are available from the remote control handset only. TV/AV Selection For receiving the desired signal: Press AV to select the TV or AV mode. TV position - to view a normal TV programme. AV position - to receive through the direct Video in- put.
17 The on timer feature allows you to automatically turn on your TV after a preset amount of time (up to 12 hours and 59 minutes) on the selected channel. The off timer also allows you to turn off y our TV after a preset amount of time . Y ou can set the off timer in conjunction with the on timer .
18 PICTURE ADJUSTMENTS 1 Press MENU . PICTURE NICAM AUTO OFF AUDIO LANGUAGE AV COLOUR AUTO LANGUAGE ON/OFF TIMER MENU PRESS: ▲ / ▼ / ENTER / MENU CH TUNING The picture settings have been adjusted at the factory under optimum signal reception conditions.
19 BASS 0 PRESS: B / A / C / D /MENU BALANCE 0 PRESS: B / A / C / D /MENU TREBLE 0 PRESS: B / A / C / D /MENU PICTURE NICAM AUTO OFF AUDIO LANGUAGE AV COLOUR AUTO LANGUAGE ON/OFF TIMER MENU PRESS: ▲ / ▼ / ENTER / MENU CH TUNING 1 Press MENU . Press or to select A UDIO .
20 PICTURE NICAM AUTO OFF AUDIO LANGUAGE AV COLOUR AUTO LANGUAGE ON/OFF TIMER MENU PRESS: ▲ / ▼ / ENTER / MENU CH TUNING AV COLOUR ADJUSTING/NICAM STEREO SOUND 1 Press MENU . Press ▲ or ▼ to select the AV COLOUR mode. AV COLOR ADJUSTING When connecting external equipment to the unit, the picture may become black and white.
21 RECEPTION OF INTERFERENCE The most common types of television interference are as follows. IGNITION Black spots and horizontal streaks may appear, the picture may flutter or drift. This is usually caused by interference from car ignition system, neon lamps, electric drills or other electrical appliances.
22 TELETEXT Most broadcasting stations off er a T eletext service in addition to their standard TV program. T eletext off ers news , weather f orecast, winning Lotto numbers , TV listings and other interesting ne ws. The te xt is received page b y page, as soon as y ou select the broadcasting station.
23 To call a teletext page Leaf through the pages with the PA GE ( M M M M M / ? ? ? ? ? ) - b utton (f orward or backward). Note: Y ou will not necessarily find a page for e very page number y ou enter . E.g. y ou hav e entered page no . 116 but it does not off er this page.
24 DISC D VD discs must be Region 4 or Region ALL type to play on this unit. The loaded Disc (D VD , A udio-CD and MP3/JPEG-CD) will be recognized automatically . The suitable disc f ormats are: D VD-Video, CD , CD-R/R W and D VD-R/RW (Video f ormat only).
25 34:56 71:33 T rack 1 1/99 PREP ARA TION/ST A TUS DISPLA Y OF DISC NOTE: If the unit does not operate properly: Static electricity can adversely aff ect the operation of this pla yer . Sometimes this can be remedied by unplugging the unit for a short time, then reconnecting it.
26 You can change the default settings to customize performance to your preference. SETTING SETUP LANGUAGE 1 Press TV/DVD to select the DVD mode. “No Disc” will appear on the screen. (If a DVD disc has already loaded, the play- back will start automati- cally .
27 No Disc Reading PLA YB A CK PR OCEDURE 6 On the TV -screen, “No Disc” changes to “Reading” and then pla yback commences. • A menu screen will appear on the TV screen, if the disc has a menu f eature. 1 Press TV/DVD to select DVD mode. 2 3 Press / or / to make a selection.
28 SPECIAL PLA YB A CK Press F.FWD during normal playback. Each press of the F.FWD button will increase the speed of the search (x 2), (x 4), (x 8), (x 15). (CD: (x 2), (x 4), (x 8), (x 20)) • To resume normal playback, press PLAY . Fast Forward Playback Press REW during normal playback.
29 MP3/JPEG PLA YB A CK 4 3 6 1 2 5 This player can play back the MP3/JPEG-data which has been recorded on CD-R or CD-RW. To produce the MP3/JPEG-data, you need a Win- dows-PC with CD-R/RW drive and a MP3/JPEG- encoding Software (not supplied). The Apple-HFS-System cannot be played.
30 4 3 1 2 6 5 About file menu NOTES: • The picture menu is displa y ed when the FUJICOLOR CD or the K odak Picture CD are pla yed. T o display the file menu press TITLE . • MP3 file on the KODAK Picture CD is not recognized on this unit. JPEG CD playback Place a disc on which JPEG files have been recorded in the disc slot.
31 SETTING THE JPEG INTER V AL 1 2 You can continuously play back all JPEG files automatically. Press SETUP in the stop mode. Press or to select “Picture”, then press ENTER . Press or to select “JPEG Interval”. 3 4 Press or to select your desired time.
32 SETTING THE SELECT FILES 4 When playing back a CD containing a mix- ture of MP3 and JPEG files, only MP3 or JPEG files can be displayed on the file menu. Press SETUP in the stop mode. Press / to select “Picture”, then press ENTER . Press or to select “Select Files”.
33 NOTES: •Y ou can select the P ause, Slow or Search playback in the zoom mode. • Some discs may not respond to zoom feature. ZOOMING/LOCA TING DESIRED SCENE This unit will allow you to zoom in on the frame image. You can then make selections by switching the position of the frame.
34 NOTES: Some discs may not work with the repeat operation. In A-B repeat mode, subtitles near point A or B ma y not appear . During the A-B Repeat Playbac k the ANGLE feature will not operate. Y ou ma y not be able to set A-B Re- peat, depending on the scenes of the DVD.
35 Marker 2 Marker 1 Marker 3 /Enter/Cancel/Marker Marker 2 Marker 1 Marker 3 /Enter/Cancel/Marker 27 00 54 Marker 2 Marker 1 Marker 3 /Enter/Cancel/Marker 27 16 08 54 25 31 00 01 02 Marker 2 Marker 1 Marker 3 /Enter/Cancel/Marker 27 16 08 54 25 31 00 01 02 MARKING DESIRED SCENES The unit stores the points that you want to watch again.
36 1/8 Eng Dolby Digital 2/8 F ra Dolb y Digital 1/32 Eng Off Subtitles T urning the Subtitles On and Off When playing back a disc recorded with subtitles, you can turn the subtitles on or off. Press SUBTITLE during play- back until “Off ” appears.
37 1/9 CHANGING ANGLES/TITLE SELECTION/D VD MENU When playing back a disc recorded with multi-angle facil- ity, you can change the view angle. 1 Press ANGLE during play- back. The current angle will ap- pear . 2 Press ANGLE repeatedly until the desired angle is selected.
38 1 Press SETUP in the stop mode. Press or to select “Picture”. 2 Press or ENTER , then press or to select “Tv Screen”. 3 Press or ENTER . Press or to select your de- sired screen type, then press ENTER .
39 DYNAMIC RANGE CONTROL 1 Press SETUP in the stop mode or No Disc. Press or to select “Sound”. 2 Press or ENTER to se- lect “DRC”. 3 Press or ENTER , then press or to select de- sired setting, then press ENTER . On : Dynamic range is on. Off : Dynamic range is off .
40 PARENT AL CONTR OL SETTING Some discs are specified not suitable for children. Such discs can be limited not to play back with the unit. NOTES: • If each setup (P .26,31,32,38~41,43~45) has been completed, the unit can alwa ys be worked under the same con- ditions (especially with D VD discs).
41 TO CHANGE THE P ARENT AL LEVEL NOTE: Do not forget the pass w ord. If you forget the password, you can reset the code as follow: Press and hold the Stop button on the front panel, then press and hold the number 7 button on the remote control at the same time.
42 TEMPORAR Y DISABLING OF RA TING LEVEL BY D VD DISC If you wish to cancel the set r ating lev el tempor arily , select “Parental Control Level” with or , then press ENTER . If the 4-digits pass word at step 3 on page 40 has been set, the pass word entering screen will appear as shown in step 4 belo w .
43 Menu Subtitle Audio English Automatic English English Francais Espanol Deutsch Italiano Other /Enter/Setup/Return Language Picture Parental Sound Other SETTING MENU LANGUAGE Press or ENTER . Press or to select your desired language, then press ENTER .
44 Menu Subtitle Audio English Automatic English Francais English Espanol Deutsch Italiano Automatic Other Off /Enter/Setup/Return Language Picture Parental Sound Other Menu Subtitle Audio English Aut.
45 Menu Subtitle Audio English Automatic English /Enter/Setup/Return Language Picture Parental Sound Other SETTING A UDIO SOUNDTRA CK LANGU A GE Press or ENTER . Press or to select your desired Audio Language, then press EN- TER . 1 Press SETUP in the stop mode.
46 LANGUAGE CODE LIST Enter the appropriate code number for the initial settings "AUDIO", "SUBTITLE" and/or "MENU LANGUAGE" (see pages 43~45).
47 BEFORE REQUESTING SER VICE If your unit does not work properly check the following before calling a service engineer. 7 11 CAUSE SYMPTOMS SOLUTION PAGE POWER No power. The Mains lead is not connected. POWER button is OFF. 11 7 8 No picture, no sound.
48 GENERAL Power supply: Power consumption: W eight: Dimensions: Operating temperature: Operating humidity: TELEVISION T ype: Display method: Number of Pixels: Viewing angle: T uner type: Receiving ch.
49.
04/10 K ORION ELECTRIC CO ., L TD . (J AP AN).
1 Quick Set-up Sheet for 14LD Antenna and Power Connections Connect as follows. How to install the batteries 1 Open the cover in direction of the arrow and take it off. 2 Install the batter ies as shown below , pay attention to polarities. 3 Replace cov er .
2 On-screen language selection Press MENU . If you press MENU for the first time, the language setting menu will appear. 2 Press or to select the desired language. Then press ENTER . 3 Press MENU to return to the normal TV screen. 4 Press TV/DVD to select TV mode.
3 PICTURE NICAM AUTO OFF AUDIO LANGUAGE AV COLOUR AUTO LANGUAGE ON/OFF TIMER MENU PRESS: ▲ / ▼ / ENTER / MENU CH TUNING Press MENU . Press or to select CH TUNING. Then press ENTER . Channel preset 2 Press or to select AUTO . 3 Then press ENTER . The auto search starts and all channels are stored automatically, in the order that they are found.
4 Depending on the D VD , the start-up sequence will var y . Some D VDs indicate a menu screen. Press / or / to select the menu. Then press ENTER to confir m the selection. Setting Setup language for DVD J5N70307A K Press SETUP until normal TV screen appears.
An important point after buying a device Orion 14LD (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Orion 14LD yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Orion 14LD - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Orion 14LD you will learn all the available features of the product, as well as information on its operation. The information that you get Orion 14LD will certainly help you make a decision on the purchase.
If you already are a holder of Orion 14LD, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Orion 14LD.
However, one of the most important roles played by the user manual is to help in solving problems with Orion 14LD. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Orion 14LD along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
