Instruction/ maintenance manual of the product JM889NU Oregon Scientific
Go to page of 12
1 GB Oregon Scientific TM JUMBO RF CLOCK with Indoor Thermometer (JM889N/JM889NU) User Manual TABLE OF CONTENTS Introduction ........................................................................ 2 Key features ......................................
GB 2 INTRODUCTION Thank you for selecting the Oregon Scientific TM Jumbo RF Clock with Indoor Thermometer as your product of choice. This device is designed to give you many years of reliable service,.
3 GB Back View LCD Display Symbols Icon Description Explanation Radio Reception Signal Indicates the condition of radio reception. Low Battery Appears when power is low. Alarm-on Appears when alarm is activated. Alarm Time Indicator Appears when alarm time is displayed.
GB 4 SAFETY AND CARE INSTRUCTIONS Safety Precautions Please observe the following safety precautions when setting up and using this product. • LCD panel - The LCD panel is made of glass, and may break if the unit is dropped or impacted.
5 GB Batteries When using the product for the first time, please note that the batteries have already been installed in the unit. To operate, locate the clear plastic battery tab inside the battery compartment and remove it. To load the batteries: Diagram Instructions 1.
GB 6 Indoor Temperature Display Soon after the clear plastic battery tab has been removed, the unit immediately reads and displays the surrounding indoor temperature. Toggling between Seconds/Day-of-Week Display To toggle between displaying seconds or day-of-week on the LCD screen, press the CLOCK button.
7 GB Enabling/Disabling Radio Reception To manually disable the reception of the RF signal, press and hold the [UP ] and [DOWN ] buttons simultaneously for 2 seconds until the Radio Reception symbol completely disappears. To enable the reception again, press and hold [UP ] and [DOWN ] buttons simultaneously for 2 seconds.
GB 8 Language Options The main unit can display the week- day in five different selectable lan- guages. ALARM FUNCTIONS Basic Functions Your product can also be used as an alarm clock. 1. When the alarm goes off, you can turn it off by pressing ALARM.
9 GB Adjusting the Alarm Time To adjust the Alarm Time, make sure that the Alarm Time is currently displayed on the LCD screen. 1. Press and hold the ALARM button for 2 seconds. 2. Adjust the hour of the Alarm Time. Press ALARM when done. 3. Adjust the minute of the Alarm Time.
GB 10 TROUBLESHOOTING GUIDE This section includes a list of frequently asked questions for problems you may encounter. If your device is not operating as you think it should, check here before arranging for servicing. Radio antenna not displayed on LCD screen.
11 GB SPECIFICATIONS Dimensions: Width x Height x Depth 234mm x 220mm x 23mm Weight 426g (without batteries) Radio frequency: System DCF77 (JM889N) or MSF60 (JM889NU) Display: Time format 24 Hour (JM889N) or 12-Hour AM/PM (JM889NU) Date format DD-MM Day-of-week display In English, French, German, Spanish, and Italian Clock accuracy +/-0.
GB 12 EC-DECLARATION OF CONFORMITY This product complies with the essential requirements of Article 3 of the R&TTE 1999 / 5 / EC Directive, if used as intended and the following standards have been applied: Safety of information technology equipment (Article 3.
An important point after buying a device Oregon Scientific JM889NU (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Oregon Scientific JM889NU yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Oregon Scientific JM889NU - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Oregon Scientific JM889NU you will learn all the available features of the product, as well as information on its operation. The information that you get Oregon Scientific JM889NU will certainly help you make a decision on the purchase.
If you already are a holder of Oregon Scientific JM889NU, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Oregon Scientific JM889NU.
However, one of the most important roles played by the user manual is to help in solving problems with Oregon Scientific JM889NU. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Oregon Scientific JM889NU along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
